Lose those flashy chrome front kidney grills on your 2007 and newer X5 or 2008 and newer X6, and replace them with these direct-fit black grills for a blacked-out "stealth" look. These black grills give your X5 or X6 a darker, more aggressive look in just minutes. Kit includes two blacked out grills with matte black finish.

Made from impact resistant long life ABS polymer, these grills are precision crafted for a perfect OEM fit. Unlike some competitors blacked-out grills which have a shiny finish that give off a cheap look and feel, these black grills feature a high quality matte finish reminiscent of genuine BMW parts.

Applications:
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive48i X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

These direct replacement center grills let you eliminate the stock chrome kidney / center grills, feature perfect fit and beautiful finish, and give the aggressive black out look. Kit includes two blacked out grills to complete the look of your X5/X6.

Made from impact resistant long life ABS polymer, these grills are precision crafted for a perfect OEM fit.

Applications:
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive48i X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

Lose those flashy chrome front kidney grills on your 2007 and newer X5 or 2008 and newer X6, and replace them with these direct-fit black grills for a blacked-out "stealth" look. These black grills give your X5 or X6 a darker, more aggressive look in just minutes. Kit includes two blacked out grills with matte black finish.

Made from impact resistant long life ABS polymer, these grills are precision crafted for a perfect OEM fit. Unlike some competitors blacked-out grills which have a shiny finish that give off a cheap look and feel, these black grills feature a high quality matte finish reminiscent of genuine BMW parts.

Applications:
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive48i X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

A blend of functionality and rugged aesthetics. Designed for a direct fit specifically for your E70 X5.

This is more than your ordinary roof rack. ECS's range of roof racks may share a consistent blend of striking good looks and incredible functionality, but here's the twist: each one is meticulously tailored for your vehicle's chassis, ensuring a seamless and precise fit. Unique geometry, patterns, and profiles are used to integrate flawlessly with factory mounting points and fit snugly within the space constraints of your vehicle's body. This guarantees that every roof rack aligns perfectly with the front and rear, with no overhang and zero interference with doors, hatches, or any aspect of your daily vehicle use.

Crafted from durable 5052 Aluminum sheet metal, this roof rack system exemplifies durability and reliability at its core. Featuring 6 gauge side panels and fairings, along with 1/4” roof mounting brackets, it offers a perfect blend of strength and lightweight construction. The complete roof rack, including 5 crossbars, weighs in at just under 50 lbs, ensuring ease of handling and installation without compromising strength. This kit includes aluminum crossbars available in both round and square shapes, featuring t-slot channels designed to accommodate a wide range of roof rack accessories.

Despite its lightweight nature, this roof rack is engineered to withstand substantial static loads, supporting well over 500 lbs with confidence. The team at ECS has engineered a versatile solution suitable for various applications, whether it's transporting gear for outdoor adventures or carrying professional equipment. For optimal performance and safety, users are advised to consult the manufacturer's guidelines for maximum dynamic roof loading, ensuring your vehicle is up to the task that we know our line of roof racks can handle.

The ECS roof rack kit comes fully loaded featuring a total of 5 80/20 crossbars and 2 round bars. Enhancing the overall structural stability, the front and rear square bars (80/20), are specifically utilized for mounting the front and rear fairings. This arrangement leaves you with 3 full-width square bars equipped with T slots, alongside 2 round bars, providing flexibility in setup and accommodating a variety of roof rack accessories. This configuration ensures optimized utility and adaptability for your specific needs.

The design engineer's incredible attention to detail left no aspect overlooked. A standout feature is the floating design, eliminating the necessity for a bulb seal on the front fairing, protecting your vehicle's paint from gradual wear and tear. Additionally, the sloped front fairing is designed to seamlessly align with your vehicle's roofline, effectively minimizing wind noise and eliminating any unwanted whistling noises often associated with alternative roof baskets and racks.

Key Benefits:

Allows full operation of your factory sunroof
Compatible with all roof rack accessories
Provisions for ratchet straps and tie-downs along the entire roof line
Lightweight, Less than 50 lbs fully assembled
Durable 5052 Aluminum sheet metal design for high strength and low weight
Can support well over 500 LBS in static load (refer to manufacturer guidelines for maximum dynamic roof loading)
Rugged anodized aluminum crossbars come in a round bar shape as well as a modular 80/20 shape for use with many optional roof rack accessories
Floating design prevents the need for any bulb seal on the front fairing, protecting your paint from wear over time
The sloped front fairing matches the roof line, limiting wind noise and producing no undesirable whistling noises common with other roof baskets and racks
Design:

Well-thought-out modular roof rack to accommodate all of your overland needs while being aggressive in styling
Roof rack includes sheet metal side profiles, fairings, and mounting feet.
Bent sheet metal brace stiffens the front fairing to keep it light and resistant to buffeting from the wind
All components are satin black powder-coated for superior corrosion and wear resistance
Black anodized 80/20 cross members are used to tie the sides together and mount the fairings
Fairings include mounting provisions for off-road style lighting and tool mounts
Fairings include pass-through holes for straps, ropes, wiring for lighting, and much, much more
Side profiles include tie-down cleats, ratchet strap hook slots, and a large number of slots for mounting accessories
Modular crossbar mounts to create a flat top for rooftop tent and cargo box mounting (can open sunroof), or low mounting for a basket style rack (canNOT open sunroof)

Flush License Plate Bolt - 12mm

Upgrade your vehicle's aesthetics with the Flush License Plate Bolt - 12mm, designed to seamlessly blend into your license plate for a sleek appearance. Crafted from durable materials, this bolt offers both style and functionality. Its low-profile design ensures a clean look while providing secure attachment. Enhance your vehicle's exterior with this easy-to-install accessory.

• Sleek and seamless appearance
• Durable construction for long-lasting use
• Low-profile design for a clean look
• Easy installation process

These eyelids will give your front end a more aggressive look. These eyelids are made with flexible FRP wrapped in plain weave carbon fiber, ensuring precision fitment following the shape and curve of the headlights perfectly. Perfect for those who have aftermarket carbon fiber hoods.

For installation just align the eyelids to the hood and bumper then use the included double sided tape and adhere it onto the headlight.

These products fit the following BMWs:
2007 - 2011 E70 X5 3.0sd X5 3.0si x5 4.8i X5M
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i X5 xDrive50i X5M