BMW X6 M S63 4.4L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

90mm Black M14 BMW 5 Lug Hex Head Stud Kit - APEX
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:26171623
Part#: HW-APX-M14125-90
Ships in 3 Business Days
$ 160.00 USD
Free Shipping
$ 160.00 USD
Free Shipping

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

  • Enhanced strength and safety
  • Improved pit stop times
  • Simplified wheel installation and removal
  • Versatility with extended length wheel studs
  • Reduced wear on hub threads
  • Long-term durability and safety
  • Simplified maintenance and improved efficiency
Show More Show Less
F15/F16 F85/F86 KW V3 Series Coilover Kit
For vehicles with Rear Air Suspension and with EDC
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KW Suspension - Corporate Logo
T#:363571
Part#: 352200AM
In Stock at Vendor
$ 4,074.00 USD
$ 4,074.00 USD
KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
Show More Show Less
KW H.A.S. Height Adjustable Spring Kit - BMW F95/F96 X5M X6M xDrive (...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KW Suspension - Corporate Logo
T#:5175722
Part#: 253200ED
In Stock at Vendor
$ 1,704.00 USD
$ 1,704.00 USD
KW H.A.S - Height Adjustable Spring kits are a great alternative to conventional springs. You can adjust the height of your vehicle with the KW height adjuster. These kits are ideal for cars with either stock type shocks or the factory EDC - Electronic Damping Control - shocks, as the factory EDC system is retained. This lowering solution from KW optimizes the dynamic performance and steering behavior while still using the factory EDC system. This kit contains vehicle specific adjustable spring seats with adjusting KW lowering springs. This complete conversion allows an individual adjustable lowering solution.
Show More Show Less

Akrapovic Titanium Slip on Exhaust with Carbon Fiber Tips - F95/F96 X...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Akrapovic - Corporate Logo
T#:2721044
Part#: S-BM/T/16H
In Stock at Vendor
$ 9,231.99 USD
$ 9,231.99 USD
The exhaust tone is most noticeable as you move through the gears and accelerate, and this can be further controlled through the addition of the optional Akrapovic Sound Kit to provide increased aural pleasure. Akrapovic has achieved power gains of 12.1 hp at 2,400 rpm and torque increases of 35.4 Nm at 2,400 rpm when tested on the Akrapovic dyno against a BMW X5M with a stock M Sport exhaust system for comparison.
Show More Show Less

Apex EC-7 19" Staggered Wheel Set - Race Silver
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:599071
Part#: EC71995ET28RSKT
Ships in 6 Business Days
$ 1,876.00 USD
$ 1,876.00 USD
Specifications: Color - Race Silver Size Front - 19x9.5" ET28 ​Size Rear - 19x10.5" ET45
APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 6 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 6 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Evolution Line Titanium Exhaust - F85/E86 X5M/X6M
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Akrapovic - Corporate Logo
T#:391371
Part#: S-BM/T/1
Back Ordered
$ 9,111.99 USD
Free Shipping
$ 9,111.99 USD
Free Shipping

The Akrapovic Cat-back Titanium exhaust system for the BMW X5/X6 M is designed for drivers who demand more power and less weight. In addition to weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the X5/X6 M become music to ones ears. An optional wireless "dualmode" exhaust flap control allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, when the exhaust flap is opened the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Power gains come in at 5.3 hp (at 5300 RPM) and 8.4 Nm (at 5250 RPM) with just the exhaust alone, and a total weight savings of 32.7 lbs! That is a 42% overall reduced difference in weight from stock.

Not for sale outside the US or Canada.

This item fits the following BMWs:
2015+ F85 BMW X5 M
2015+ F86 BMW X6 M

Show More Show Less

E70/E71 KW Coilover Kit - Variant 3 (V3)
For vehicles without EDC
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KW Suspension - Corporate Logo
T#:348854
Part#: 35220069
Back Ordered
$ 3,784.00 USD
Free Shipping
$ 3,784.00 USD
Free Shipping
Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 35-65mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars originally equipped with EDC electronically adjustable shocks will require the KW EDC Cancellation Kit. Select this from the menu below.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less

    X5M / X6M Type M7X KW Electronic Damping Cancellation Kit
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:11699
    Part#: 68510181
    Ships in 4 Business Days
    $ 663.99 USD
    Free Shipping
    $ 663.99 USD
    Free Shipping
    X5M / X6M Type M7X KW Electronic Damping Cancellation Kit
    Exhaust Valve Controller Sound Kit - F85/86 X5 M, X6 M
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Akrapovic - Corporate Logo
    T#:394612
    Part#: P-HF947
    In Stock at Vendor
    $ 974.99 USD
    Free Shipping on orders $49 and up
    The Akrapovic Sound Kit is a wireless exhaust valve control system that allows you full control over the valve system in your titanium Akrapovic exhaust. This enable you to open the exhaust valve when you want to turn as many heads as possible or keep it closed when your out for an easy Sunday drive.
    Show More Show Less
    APEX Wheels Metal Valve Stem - Silver - BMW & MINI
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:593646
    Part#: HW-OEM-VALVE-SV
    Ships in 3 Business Days
    $ 17.00 USD
    Free Shipping
    $ 17.00 USD
    Free Shipping
    APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
    Show More Show Less


    APEX Solid Gloss Black BMW Center Caps - Priced Each
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:639899
    Part#: HW-APX-CAP-BLK
    Ships in 10 Business Days
    $ 9.99 USD
    Free Shipping
    $ 9.99 USD
    Free Shipping
    Akrapovic Rear Carbon Fiber Diffuser - F95/F96 X5M/X6M
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Akrapovic - Corporate Logo
    T#:2721048
    Part#: DI-BM/CA/8/G
    In Stock at Vendor
    $ 1,830.99 USD
    Free Shipping on orders $49 and up
    The stunning carbon fiber diffuser is a completely new design from the one that comes as standard on the car, and it gives the rear of the car a more aggressive and sporty feel. It shows off the tailpipes to their full extent and integrates the parking sensor mounts. The diffuser allows the use of BMW´s tow hook.
    Show More Show Less
    APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:593645
    Part#: HW-OEM-VALVE-GM
    Ships in 3 Business Days
    $ 15.00 USD
    Free Shipping
    $ 15.00 USD
    Free Shipping
    APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
    Show More Show Less

    APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:201364
    Part#: EC71995ET22AN
    Ships in 6 Business Days
    $ 459.00 USD
    $ 459.00 USD
    19x10" ET25 APEX EC-7 Wheel 23.5lbs.
    Wheel Specs
    Fitment:Mostly Rear
    Size:19x9.5"
    Offset (mm):22
    Weight (lbs):22.9
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less

    APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:201374
    Part#: EC719105ET22SMBK
    Ships in 6 Business Days
    $ 479.00 USD
    Free Shipping
    $ 479.00 USD
    Free Shipping
    19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
    Wheel Specs
    Fitment:Front or Rear
    Size:19x10.5"
    Offset (mm):22
    Weight (lbs):23.9
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less
    APEX Wheels Metal Valve Stem - Black - BMW & MINI
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:593644
    Part#: HW-OEM-VALVE-BK
    Ships in 3 Business Days
    $ 15.00 USD
    Free Shipping on orders $49 and up
    APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
    Show More Show Less

    Akrapovic 2024+ BMW X5M/X6M (Face Lift) Evolution Link Pipe Set (Tit...
    For Vehicles with Production Date from 04/23
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Akrapovic - Corporate Logo
    T#:42672200
    Part#: AKRE-BM/T/15
    In Stock at Vendor
    $ 3,687.99 USD
    $ 3,687.99 USD
    Akrapovic Sound Kit - F95/F96 X5M/X6M
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Akrapovic - Corporate Logo
    T#:2721045
    Part#: P-HF1310
    In Stock at Vendor
    $ 593.99 USD
    Free Shipping on orders $49 and up
    The optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine. Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound. With the use of a receiver (already included in the evolution system) to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller or the new smartphone app (for iOS and Android) to regulate the valves.
    Show More Show Less

    Akrapovic Titanium Slip-On Line Exhaust w/ carbon fiber tips - BMW F9...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Akrapovic - Corporate Logo
    T#:37959686
    Part#: S-BM/T/35H
    In Stock at Vendor
    $ 8,547.99 USD
    Free Shipping on orders $49 and up

    Akrapovic Titanium Slip-On Line Exhaust w/ Carbon Fiber Tips - BMW F95 X5 M | F96 X6 M

    The Akrapovic Titanium Slip-On Line Exhaust w/ Carbon Fiber Tips - BMW F95 X5 M | F96 X6 M is a high-performance exhaust system designed to elevate the driving experience of your BMW X5 M or X6 M. Crafted from lightweight, high-grade titanium alloys and finished with carbon-fibre and titanium tailpipes, this system delivers a distinctive exhaust tone, enhanced power, and improved torque. The Slip-On Line (Titanium) features dual valves that tailor gas flow to produce the unmistakable Akrapovič sound, setting it apart from the stock M Sport exhaust. Dyno tests have shown power gains of 12.1 hp and torque increases of 35.4 Nm at 2,400 rpm. For even greater customization, the optional Akrapovič Sound Kit and Evolution Link Pipe Set (Titanium) allow you to fine-tune the exhaust tone and performance. Additionally, the system’s sleek carbon-fibre tips and optional handmade carbon-fibre diffuser enhance the vehicle’s visual appeal, making it a perfect blend of performance and style.

    Key Benefits:

    • Lightweight, high-grade titanium construction for durability and performance.
    • Carbon-fibre and titanium tailpipes for a sleek, premium finish.
    • Dual-valve system for a distinctive Akrapovič exhaust tone.
    • Power gains of 12.1 hp and torque increases of 35.4 Nm at 2,400 rpm.
    • Compatible with optional Akrapovič Sound Kit and Evolution Link Pipe Set for enhanced sound and performance.
    • Handmade carbon-fibre diffuser available for added visual appeal.
    • Meets ECE type approval for road legality.

    Upgrade your BMW F95 X5 M or F96 X6 M with the Akrapovic Titanium Slip-On Line Exhaust w/ Carbon Fiber Tips and experience the perfect combination of performance, sound, and style.

    Show More Show Less

    APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:201376
    Part#: EC719105ET22AN
    Ships in 6 Business Days
    $ 479.00 USD
    $ 479.00 USD
    19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
    Wheel Specs
    Fitment:Front or Rear
    Size:19x10.5"
    Offset (mm):22
    Weight (lbs):23.9
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less
    Akrapovic 2024+ BMW X5M/X6M (Face Lift) Sound Kit
    For Vehicles with Production Date from 04/23
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Akrapovic - Corporate Logo
    T#:42672201
    Part#: AKRP-HF1549
    In Stock at Vendor
    $ 593.99 USD
    Free Shipping on orders $49 and up
    $ 593.99 USD
    Free Shipping on orders $49 and up
    APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:201371
    Part#: EC71910ET25SMBK
    Ships in 6 Business Days
    $ 469.00 USD
    Free Shipping
    $ 469.00 USD
    Free Shipping
    19x10" ET25 APEX EC-7 Wheel 23.5lbs.
    Wheel Specs
    Fitment:Mostly Rear
    Size:19x10"
    Offset (mm):25
    Weight (lbs):23.5
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less


    APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:201357
    Part#: EC71995ET43RS
    Ships in 6 Business Days
    $ 426.00 USD
    Free Shipping
    $ 426.00 USD
    Free Shipping
    19x9.5" ET43 APEX EC-7 Wheel 23lbs.
    Wheel Specs
    Fitment:Mostly Rear
    Size:19x9.5"
    Offset (mm):43
    Weight (lbs):23
    Profile:2, moderate dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less
    Akrapovic Rear Carbon Fiber Diffuser - Matte Carbon - F95/F96 X5M/X6M...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Akrapovic - Corporate Logo
    T#:2721049
    Part#: DI-BM/CA/8/M
    Back Ordered
    $ 1,579.99 USD
    Free Shipping on orders $49 and up
    The stunning carbon fiber diffuser is a completely new design from the one that comes as standard on the car, and it gives the rear of the car a more aggressive and sporty feel. It shows off the tailpipes to their full extent and integrates the parking sensor mounts. The diffuser allows the use of BMW´s tow hook.
    Show More Show Less
    E70 E71 KW V3 Series Coilover Kit
    For vehicles with EDC
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:348857
    Part#: 35220089
    Back Ordered
    $ 4,594.00 USD
    Free Shipping
    $ 4,594.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
    Show More Show Less

    APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:201359
    Part#: EC71995ET33SMBK
    Ships in 6 Business Days
    $ 459.00 USD
    Free Shipping
    $ 459.00 USD
    Free Shipping
    19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
    Wheel Specs
    Fitment:Front or Rear
    Size:19x9.5"
    Offset (mm):33
    Weight (lbs):22.5
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less

    E70/E71 KW V3 Series Coilover Kit
    For vehicles without EDC
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    KW Suspension - Corporate Logo
    T#:348855
    Part#: 35220079
    Back Ordered
    $ 4,154.00 USD
    Free Shipping
    $ 4,154.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 10-45mm lowering; Rear = 10-35mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars originally fitted with EDC electronically adjustable shocks require KW EDC Cancellation Kit. Select this from the menu below.

    Lifetime warranty!




    This item fits the following BMWs:
    2010+ E70 BMW X5M
    2010+ E71 BMW X6M
  • Show More Show Less
    APEX EC-7 19x9.5" ET33 Silver Wheel 22.5lbs
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:201360
    Part#: EC71995ET33RS
    Ships in 6 Business Days
    $ 459.00 USD
    Free Shipping
    $ 459.00 USD
    Free Shipping
    19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
    Wheel Specs
    Fitment:Front or Rear
    Size:19x9.5"
    Offset (mm):33
    Weight (lbs):22.5
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less

    APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    2X Entries For Our G87 M2 Sweepstakes!
    APEX Wheels - Corporate Logo
    T#:201361
    Part#: EC71995ET33AN
    Back Ordered
    $ 459.00 USD
    Free Shipping
    $ 459.00 USD
    Free Shipping
    19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
    Wheel Specs
    Fitment:Front or Rear
    Size:19x9.5"
    Offset (mm):33
    Weight (lbs):22.5
    Profile:3, deep dish

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

    Price is per wheel.

    Show More Show Less