BMW Engine Parts for BMW X6 M S63 4.4L

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

Designed with performance enthusiasts in mind, our Performance Ignition Service Kit is a plug-and-play upgrade for your BMW! This kit boosts spark energy and engine efficiency, featuring a full set of eight Turner Motorsport Performance Ignition Coils. Our coils provide a 10% increase in spark energy compared to stock ignition coils and are included in our lifetime replacement program for peace of mind. Additionally, the kit includes eight NGK 97506 spark plugs, which are one heat range colder for enhanced protection against pre-ignition and detonation, especially in tuned applications.

Turner Motorsport High Performance Ignition Coils - Set of Eight

Increased Performance: Produces up to 10% more spark energy output than stock! Performance Aesthetic: The attractive "Turner blue" coil housing includes a laser-etched resin Turner Motorsport logo. Plug & Play Upgrade: Exact fit for your N63B44T3 (N63B), S63B44T4 (S63M), or S68 (S68T). Lifetime Replacement: Backed by our Lifetime Replacement Program, protecting your purchase in the event of failure. NGK 97506 / SILZKBR8D8S Spark Plugs - Set of Eight

Fine wire, iridium-tipped center electrode Fine wire, platinum-tipped ground electrode Copper core aids in heat removal One heat range colder for N63B (N63B44T3), S63M (S63B44T4), and S68 (S68T). Upgrade your ignition system today with our Performance Ignition Service Kit and restore the power your engine deserves!

Note: Not all N63B and S63M applications use the same ignition coil. Many S63B44T4/S63M applications—including the F90 M5 and F91/F92/F93 M8—use the older "N Series" ignition coil architecture. If your N63/S63-equipped BMW utilizes the older "pencil style" ignition coil, you can find the Turner Motorsport Performance version HERE.

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the current replacement for some BMW 6 and 8-cylinder engines built in the late 2000s and after. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. It's listed as a replacement coil for N20, N55, and S55 engines. In March 2015 BMW approved it for N51/N52 engines. This part number replaces the previous BMW part number 12137594937 for the cars listed below.

Sold per coil. Includes boot and connector.

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

BMW B46 B48 B58 Ethanol Content Sensor is a genuine Continental (VDO) Flex Fuel E85 sensor designed to accurately measure the ethanol-to-gasoline ratio in your vehicle's fuel system.

• Accurate Measurement: Measures the ethanol content in fuel, providing precise data for optimal engine performance and fuel management.
• Flexible Compatibility: Works with a blend of ethanol and gasoline, suitable for vehicles with appropriate fuel lines, injectors, and ECU calibration.
• Quick-Connect Installation: Features quick-connect style fuel connections for easy installation in the main fuel feed line.
• Integrated Fuel Analysis: All fuel passes through the sensor before reaching the fuel rail, allowing for accurate ethanol percentage readings sent to the vehicle's DME or ECU.
• Standard Fittings: Both inlet and outlet connections are 3/8" SAE sized fittings for straightforward integration with existing fuel systems.

This ethanol content sensor is essential for vehicles running flex fuel, ensuring that the engine receives the correct ethanol ratio for peak performance and efficiency.