BMW F97 X3 M S58 3.0L

BMS Pedal Tuner - N52, N54, N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

BMW F8X G8X Exhaust Valve Cable Extender

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22295072

Part#: 11-074G

Ships in 3 Business Days

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

BMW F8X G8X Exhaust Valve Cable Extender from Turner Motorsport is essential for upgrading your BMW's exhaust system, particularly if you're experiencing issues with stock cable lengths. This extender ensures a proper connection for rear exhaust systems that may have shorter cables.

Model Compatibility: Designed for BMW models F80, F82, F87, G80, G82, G87, and F97.
Proper Fit: Ensures a correct fit for rear exhaust systems, preventing any issues with cable length.
Available Lengths: Offered in 12-inch and 24-inch options to suit different needs.
Custom Lengths: Custom lengths available upon request for a tailored solution.
High-Quality Construction: Built to maintain the reliability and performance of your BMW’s exhaust system.

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

BMS Elite F97 X3M & F98 X4M Performance Intake - Red Filters - Matte ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26871559

Part#: BMSF97REDBLK

Ships on Jul 23, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Introducing the BMS Elite X3M & X4M Performance Intake kit. Available in two filter options, this kit comes with everything needed for a seamless installation. Increasing both turbocharger sound and overall engine performance, this intake kit is sure to boost you X3M or X4M to new extremes. Adds up to 50 horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Huge 3.5" mandrel-bent aluminum tubing CNC Billet aluminum fittings Retains OEM cold air ducting Looks great under the hood Cleanable and reusable performance air filters Made in the USA

Show More Show Less

7 pc. 3/8" Dr. Spark Plug Socket Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641915

Part#: 8845D

Ships in 6 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Complete set of spark plug sockets.

Active Autowerke Signature Trunk Emblem

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Active Autowerke BMW S58 F97/F98 X3M/X4M Downpipes w GESI CAT ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:638761

Part#: 11-070

Ships in 3 Business Days

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about.

Show More Show Less

14 Pc. Full Polish SAE Angle Head Wrench Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:642035

Part#: 9914A

Ships on Jul 29, 2026

$ 113.91 USD

Add to Wish List

Qty

$ 113.91 USD

Add to Wish List

Radius V-Groove design creates an anti-slip while also preventing round-off.

Active Autowerke BMW S58 F97/F98 X3M/X4M Downpipes W Aflow CATs ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50837018

Part#: 11-070A

Ships in 3 Business Days

$ 2,399.00 USD

Add to Wish List

Qty

$ 2,399.00 USD

Add to Wish List

These downpipes provide faster turbo spool, increased power, and a high-performance exhaust sound.

Active Autowerke Valved Rear Axle-back Exhaust (Black Tips) - F97/F98...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039980

Part#: 11-103B

Ships in 3 Business Days

$ 3,799.00 USD

Add to Wish List

Qty

$ 3,799.00 USD

Add to Wish List

At Active Autowerke, performance is about more than peak numbers. It’s about delivering a driving experience that feels sharper, sounds better, and maintains the refinement expected from a modern BMW. With over four decades of BMW performance development behind it, the F97/F98 X3M/X4M rear exhaust was engineered to give the S58-powered platform the deeper, more assertive tone many owners feel the factory system lacks. This axle-back system increases exhaust presence while preserving proper flow and daily drivability. By retaining the factory valve actuators, the system maintains full OEM functionality — delivering an aggressive note with the valves open and a controlled, composed tone when closed. On its own, the rear section provides a noticeable but refined sound improvement. For owners looking to maximize both sound and performance, the system pairs effectively with Active Autowerke mid-pipes and catted downpipes. Construction focuses on durability and consistent fit. The exhaust is manufactured from high-quality 304 stainless steel and each unit is test-fit on Active Autowerke’s dedicated F97/F98 fixture to ensure proper alignment and installation. Important Fitment Information A version is available for vehicles retaining the factory mid-pipes. If you later upgrade to an Active Autowerke or other aftermarket mid-pipe, different connecting pipes may be required. Sound Note: The rear section alone offers a refined increase in volume. The most significant sound change occurs when paired with an upgraded mid-pipe. Product Highlights Designed and manufactured in the USA Constructed from durable 304 stainless steel Deeper, more aggressive tone while retaining factory valve control Reuses OEM BMW exhaust valve actuators Each system test-fit on F97/F98 exhaust fixture Guaranteed fitment for F97/F98 BMW X3M and X4M Includes all necessary installation hardware

Show More Show Less

Valved Rear Axle-back Exhaust (Carbon Tips) - F97/F98 X3M/X4M ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039997

Part#: 11-103C

Ships in 3 Business Days

$ 2,944.00 USD

Add to Wish List

Qty

$ 2,944.00 USD

Add to Wish List

At Active Autowerke, performance is about more than peak numbers. It’s about delivering a driving experience that feels sharper, sounds better, and maintains the refinement expected from a modern BMW. With over four decades of BMW performance development behind it, the F97/F98 X3M/X4M rear exhaust was engineered to give the S58-powered platform the deeper, more assertive tone many owners feel the factory system lacks. This axle-back system increases exhaust presence while preserving proper flow and daily drivability. By retaining the factory valve actuators, the system maintains full OEM functionality — delivering an aggressive note with the valves open and a controlled, composed tone when closed. On its own, the rear section provides a noticeable but refined sound improvement. For owners looking to maximize both sound and performance, the system pairs effectively with Active Autowerke mid-pipes and catted downpipes. Construction focuses on durability and consistent fit. The exhaust is manufactured from high-quality 304 stainless steel and each unit is test-fit on Active Autowerke’s dedicated F97/F98 fixture to ensure proper alignment and installation. Important Fitment Information A version is available for vehicles retaining the factory mid-pipes. If you later upgrade to an Active Autowerke or other aftermarket mid-pipe, different connecting pipes may be required. Sound Note: The rear section alone offers a refined increase in volume. The most significant sound change occurs when paired with an upgraded mid-pipe. Product Highlights Designed and manufactured in the USA Constructed from durable 304 stainless steel Deeper, more aggressive tone while retaining factory valve control Reuses OEM BMW exhaust valve actuators Each system test-fit on F97/F98 exhaust fixture Guaranteed fitment for F97/F98 BMW X3M and X4M Includes all necessary installation hardware

Show More Show Less

Active Autowerke Valved Rear Axle-back Exhaust (Brushed Tips) - F97/F...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31522900

Part#: 11-103

Ships in 3 Business Days

$ 2,374.99 USD

Add to Wish List

Qty

$ 2,374.99 USD

Add to Wish List

At Active Autowerke, performance is about more than peak numbers. It’s about delivering a driving experience that feels sharper, sounds better, and maintains the refinement expected from a modern BMW. With over four decades of BMW performance development behind it, the F97/F98 X3M/X4M rear exhaust was engineered to give the S58-powered platform the deeper, more assertive tone many owners feel the factory system lacks. This axle-back system increases exhaust presence while preserving proper flow and daily drivability. By retaining the factory valve actuators, the system maintains full OEM functionality — delivering an aggressive note with the valves open and a controlled, composed tone when closed. On its own, the rear section provides a noticeable but refined sound improvement. For owners looking to maximize both sound and performance, the system pairs effectively with Active Autowerke mid-pipes and catted downpipes. Construction focuses on durability and consistent fit. The exhaust is manufactured from high-quality 304 stainless steel and each unit is test-fit on Active Autowerke’s dedicated F97/F98 fixture to ensure proper alignment and installation. Important Fitment Information A version is available for vehicles retaining the factory mid-pipes. If you later upgrade to an Active Autowerke or other aftermarket mid-pipe, different connecting pipes may be required. Sound Note: The rear section alone offers a refined increase in volume. The most significant sound change occurs when paired with an upgraded mid-pipe. Product Highlights Designed and manufactured in the USA Constructed from durable 304 stainless steel Deeper, more aggressive tone while retaining factory valve control Reuses OEM BMW exhaust valve actuators Each system test-fit on F97/F98 exhaust fixture Guaranteed fitment for F97/F98 BMW X3M and X4M Includes all necessary installation hardware

Show More Show Less