BMW's newest high-performance powertrain—the S58B30—has proven to be an extremely durable platform built to last! Unfortunately, its factory oil cooler location is an egregious weak link in an otherwise bulletproof oiling system. Positioned just inches above the ground, the engine oil cooler is vulnerable to damage from debris, potholes, parking blocks, and other unavoidable road hazards. A single impact has the potential to rupture the cooler’s delicate aluminum fins and tubes, resulting in rapid oil loss and catastrophic low oil pressure. The only factory protection for this part is a flimsy undertray.

To safeguard the oil cooler, we've engineered a high-strength Aluminum Skid Plate for the F97 X3M and F98 X4M. Designed for peak performance and protection, our skid plate acts as a shield, preventing damage to the oil cooler while maintaining proper cooling efficiency.

Crafted from 4GA (4.83mm) 5052 aluminum, our skid plate delivers a perfect balance of strength and weight savings. Unlike the fragile factory plastic belly pan, our design forms a protective barrier from the front bumper to the front subframe, shielding your oil cooler and other fragile componentry from unexpected impacts. Its sturdy one-piece design enhances underbody rigidity without adding unnecessary weight over the front axle.

At Turner Motorsport, we believe protection shouldn't come at the cost of performance. Our engineers aimed to outperform the factory undertray design with laser-cut air channels that optimize airflow through the oil cooler. While located under the engine, the oil cooler receives its fresh airflow from the front air dam. Air flows through the lower front grille, into the oil cooler core, and out of the skid plate. The factory belly pan allows air to bypass the core, leading to inefficient cooling and mediocre airflow at speed. Our design allows for efficient heat dissipation by incorporating flared air channels, which guide cool air through the oil cooler and deflect road debris before it can reach the fragile core.

Upgrade your F97 X3M or F98 X4M with the Turner Motorsport Aluminum Skid Plate for added protection, durability, and performance.

Features & Benefits:

Forward-angled leading edge: Deflects road debris before it can reach critical components Rear-facing flared air channel: Ensures efficient ventilation and heat dissipation Heavy-duty 5052 aluminum construction: Tougher than stock, lightweight design Premium Wrinkle Black Powdercoat: Provides a resilient, yet brilliant-looking finish Optimized airflow channels: Keeps your oil cooler running at peak efficiency Reinforced protection: Shields vital engine components from road debris Factory mounting points: 100% bolt-on or off, no modifications needed Made in the USA: Engineered for quality and durability Kit Includes:

Turner Motorsport Aluminum Skid Plate – Wrinkle Black Hex Bolts (2) – SN5x35mm C-Clip Inserts (2) 6mm Skid Plate Spacers (2) Installation & Support:

For your convenience, we've provided a step-by-step installation guide, including detailed removal instructions, bolt locations, and torque values.

• Each Strip: 18" in length
• Package Contains: 5 strips per box
• Easy Installation: Pre-installed with 3M tape for convenience

Aero upgrades are undoubtedly one of the most visually striking enhancements you can make to your vehicle. A carbon fiber front lip, in particular, is a popular choice that instantly elevates the car's appearance, making it stand out from the crowd.

However, this bold aesthetic upgrade has its challenges, especially when navigating uneven roads or steep driveways that can potentially damage the expensive carbon fiber. Luckily, Acexxon offers a solution to safeguard your valuable lip from scratches and more serious damage, allowing you to fully enjoy the upgrade without worries.

The Acexxon kit comprises five 18-inch strips that securely attach to the underside of your lip using pre-installed 3M double-sided tape. Three of these strips feature a smooth end, seamlessly blending with the front lip's leading edge. The remaining two strips are designed with contour flex sections, ensuring a precise fit around the lip's curved contours. Compared to other kits, Acexxon's design minimizes trimming requirements, needing only the trimming of excess material at the lip's ends for a flawless finish.

Key Features:

Includes 5 strips Each strip measures 18" in length and 1.75" in width Thickness of 5.47mm Equipped with pre-installed 3M tape for easy installation

Elevate Your Porsche's Performance with Rennline's Stainless Steel Race Hooks

Rennline introduces stainless steel folding race hooks that deliver a seamless installation on Porsche models equipped with factory screw-type removable tow hooks. In stark contrast to aluminum alternatives often advertised as mere decorations, Rennline's stainless steel tow hooks are meticulously precision-machined to meet the punishing demands of racing environments. Boasting a 2" opening, compliant with the requirements of most organized race events, these hooks conveniently thread into the factory bumper pull location. To safeguard your bumper cover, each hook is equipped with a rubber bumper to prevent unsightly damage. By adding these highly visible and efficient hooks, you'll ensure the satisfaction of corner workers and track officials. What sets Rennline's race hooks apart:

• Original folding tow hooks with a remarkable track record over countless years.
• Precision machined tapered design featuring chamfered edges to eliminate the need for cutting tow straps.
• Immaculate brushed surface finish.
• Constructed from 300 series stainless steel tow loop.
• Machined "TOW" graphics for added style.
• Compatible with GoPro camera mounts (Mount sold separately).
• Designed for use with 5/8-11 right-hand thread pitch.

AutoTecknic Universal Carbon Fiber Splitter

The AutoTecknic universal carbon fiber splitter offers an upgraded front-end aesthetic for your vehicle. Crafted with 3K plain weave carbon fiber and a UV clear coat, these splitters boast a lustrous mirror shine finish. Compatible with various bumpers upon proper installation, they deliver:

• Made from 3K plain weave carbon fiber with a UV clear coat finish
• Compatibility with various bumpers with appropriate installation
• Pre-installation drilling for mounting holes required
• Vehicle-specific installation hardware not included
• Provides a sporty appearance without excessive aggressiveness
• Shields the bumper against speed bumps and road dips
• Enhances the overall vehicle appearance while ensuring protection

Designed for those seeking a subtle yet sporty visual enhancement, these splitters safeguard your bumper while boosting your car's aesthetics. Recommended by numerous customers for both its visual appeal and functional benefits.

Package Contents: One set of AutoTecknic universal carbon fiber splitters.

Splitter Dimensions: 21" (Length) x 10" (Depth) x 5" (Width)