BMW F97 X3 M S58 3.0L

MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...

T#:340355

Part#: MSI-M14X125

In Stock

Starting at $ 25.98 USD

Add to Wish List

Starting at $ 25.98 USD

Add to Wish List

70MM, 80MM, OR 90MM OVERALL LENGTH
OUR HIGHEST-GRADE PREMIUM WHEEL STUD
DRY LUBE WITH BLACK M-PHOSPHATE COATING
STUD FOR RACE/TRACK USE
CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
USE WITH 14x1.5 NUT
For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.

These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
Heat-treated aircraft quality alloy steel
Developed from over 20 years of top level NASCAR use
These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).

Sold per stud.
Wheel nuts sold separately.

Show More Show Less

CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles without Adaptive Cruise Control and with M Sport Package

T#:599469

Part#: LPM-BMC0133-N

Ships on Jul 27, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

T#:340098

Part#: AEROCATCH

In Stock

$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD

Add to Wish List

Starting at $ 82.99 USD

Add to Wish List

As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles with Adaptive Cruise Control and M Sport Package

T#:599470

Part#: LPM-BMC0136-N

Ships in 2 Business Days

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...

T#:31158762

Part#: WBFI77-E88-501

Ships in 2 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

Provide a polished, high-quality look by covering the open center hole
Are machined from 6061-T5611 aluminum for superior strength and durability
Feature a hand-brushed finish for a seamless OEM appearance
Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
Are sold in sets of four, with center caps not included

Show More Show Less

M14x1.5, 19mm Lug Nut - Black

T#:641222

Part#: 40.0001BLK

In Stock

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Replacement M14x1.5 19mm Lug nut

Rogue Engineering F97 X3M / F98 X4M Billet Aluminum Engine Support Br...

T#:26438195

Part#: RE.345

Ships in 3 Business Days

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

The Rogue Engineering billet aluminum engine support braces are CNC'd from lightweight ACQ aluminum, specifically designed in Solidworks 3D. The sides of each brace are milled to reduce weight while look aesthetically pleasing. While each OEM steel brace weighs 688g, each of the Rogue Engineering support braces weigh only 380g. The total savings of 1.35 lbs! Sold as a pair, available in anodized black with RE logo laser engraved into the front part of the brace.

Show More Show Less

Akrapovic Rear Exhaust Tip Set - Carbon - F97

T#:8231329

Part#: TP-CT/59

In Stock at Vendor

$ 2,208.99 USD

Add to Wish List

Qty

$ 2,208.99 USD

Add to Wish List

The tailpipes are the most visible part of the exhaust system, and that’s why they dedicate particular attention to them at Akrapovič. In order to satisfy the most discriminating tastes, they’ve created handcrafted carbon fiber tail pipes. To make their tail pipes stand out from the rest even more, in addition to selecting the finest materials, they also made them larger. This gives you car an even more dynamic look.

Show More Show Less

Akrapovic Slip-On Titanium Exhaust System - Requires Tips - F97/F98 X...

T#:597421

Part#: S-BM/T/10H

In Stock at Vendor

$ 4,621.99 USD

Add to Wish List

Qty

$ 4,621.99 USD

Add to Wish List

The engineers at Akrapovic have retained the dual-mode exhaust flap control from the original system. This allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, at higher RPM (or when selecting the S mode on the gearshift) the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Show More Show Less

Black Forest Industries Extended Wheel Bolt - M14x1.25 - 40mm ...

T#:50899207

Part#: BFI-905-LUG

Ships on Aug 17, 2026

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Specifically designed for use with 10mm to 15mm wheel spacers to maintain proper thread reach.

Extended Wheel Bolt - M12x1.5 - 35mm

T#:50899204

Part#: BFI-906-LUG

Ships on Aug 17, 2026

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Specifically engineered for vehicles utilizing a wheel stud conversion.

Akrapovic Sound Kit- F97/F98 X3M/X4M

T#:597424

Part#: P-HF1255

Back Ordered

$ 689.99 USD

Add to Wish List

Qty

$ 689.99 USD

Add to Wish List

The Akrapovic Sound Kit is a wireless exhaust valve control system that allows you full control over the valve system in your titanium Akrapovic exhaust. This enables you to open the exhaust valve when you want to turn as many heads as possible or keep it closed when your out for an easy Sunday drive.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...

CNC Billet License Plate Bracket

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...

M14x1.5, 19mm Lug Nut - Black

Rogue Engineering F97 X3M / F98 X4M Billet Aluminum Engine Support Br...

Akrapovic Rear Exhaust Tip Set - Carbon - F97

Akrapovic Slip-On Titanium Exhaust System - Requires Tips - F97/F98 X...

Black Forest Industries Extended Wheel Bolt - M14x1.25 - 40mm ...

Extended Wheel Bolt - M12x1.5 - 35mm

Akrapovic Sound Kit- F97/F98 X3M/X4M

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results