BMW F97 X3 M S58 3.0L

MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...

T#:340355

Part#: MSI-M14X125

In Stock

Starting at $ 25.98 USD

Add to Wish List

Starting at $ 25.98 USD

Add to Wish List

70MM, 80MM, OR 90MM OVERALL LENGTH
OUR HIGHEST-GRADE PREMIUM WHEEL STUD
DRY LUBE WITH BLACK M-PHOSPHATE COATING
STUD FOR RACE/TRACK USE
CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
USE WITH 14x1.5 NUT
For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.

These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
Heat-treated aircraft quality alloy steel
Developed from over 20 years of top level NASCAR use
These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).

Sold per stud.
Wheel nuts sold separately.

Show More Show Less

BBS Center Cap - Black/Gold - 70.6mm

T#:579920

Part#: 56.24.119

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

For the replacement of the center cap in BBS wheels designed for 70.6mm fitment.

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles without Adaptive Cruise Control and with M Sport Package

T#:599469

Part#: LPM-BMC0133-N

Ships in 1-2 days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles with Adaptive Cruise Control and M Sport Package

T#:599470

Part#: LPM-BMC0136-N

Ships in 3 Business Days

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

BBS Center Cap - Black/Silver - 56mm

T#:578720

Part#: 009.24.257

Back Ordered

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Designed to replace the center cap on BBS wheels with a 56mm fitment.

BMW F8X G8X Exhaust Valve Cable Extender

T#:22295072

Part#: 11-074G

Ships in 4 Business Days

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

BMW F8X G8X Exhaust Valve Cable Extender from Turner Motorsport is essential for upgrading your BMW's exhaust system, particularly if you're experiencing issues with stock cable lengths. This extender ensures a proper connection for rear exhaust systems that may have shorter cables.

Model Compatibility: Designed for BMW models F80, F82, F87, G80, G82, G87, and F97.
Proper Fit: Ensures a correct fit for rear exhaust systems, preventing any issues with cable length.
Available Lengths: Offered in 12-inch and 24-inch options to suit different needs.
Custom Lengths: Custom lengths available upon request for a tailored solution.
High-Quality Construction: Built to maintain the reliability and performance of your BMW’s exhaust system.

Show More Show Less

BBS Center Cap - Black/Silver - 70.6mm

T#:578725

Part#: 009.24.494

Special Order: No Guaranteed ETA

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

These replacement center caps are crafted for BBS wheels with a 70.6mm fitment. Ideal for revitalizing the appearance or replacing lost or damaged center caps on your BBS wheels.

Active Autowerke BMW S58 F97/F98 X3M/X4M Downpipes w GESI CAT ...

T#:638761

Part#: 11-070

Ships in 4 Business Days

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about.

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 4 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

BBS Center Cap - Polished/Grey - 56mm

T#:578724

Part#: 009.24.487

Special Order: No Guaranteed ETA

$ 28.00 USD

Add to Wish List

Qty

$ 28.00 USD

Add to Wish List

Designed to replace the center cap on BBS wheels with a 56mm fitment.

M14x1.5, 19mm Lug Nut - Black

T#:641222

Part#: 40.0001BLK

In Stock

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Replacement M14x1.5 19mm Lug nut

Akrapovic Rear Exhaust Tip Set - Carbon - F97

T#:8231329

Part#: TP-CT/59

In Stock at Vendor

$ 2,208.99 USD

Add to Wish List

Qty

$ 2,208.99 USD

Add to Wish List

The tailpipes are the most visible part of the exhaust system, and that’s why they dedicate particular attention to them at Akrapovič. In order to satisfy the most discriminating tastes, they’ve created handcrafted carbon fiber tail pipes. To make their tail pipes stand out from the rest even more, in addition to selecting the finest materials, they also made them larger. This gives you car an even more dynamic look.

Show More Show Less

Akrapovic Slip-On Titanium Exhaust System - Requires Tips - F97/F98 X...

T#:597421

Part#: S-BM/T/10H

In Stock at Vendor

$ 4,621.99 USD

Add to Wish List

Qty

$ 4,621.99 USD

Add to Wish List

The engineers at Akrapovic have retained the dual-mode exhaust flap control from the original system. This allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, at higher RPM (or when selecting the S mode on the gearshift) the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Show More Show Less

Active Autowerke BMW S58 F97/F98 X3M/X4M Downpipes W Aflow CATs ...

T#:50837018

Part#: 11-070A

Ships in 4 Business Days

$ 2,399.00 USD

Add to Wish List

Qty

$ 2,399.00 USD

Add to Wish List

These downpipes provide faster turbo spool, increased power, and a high-performance exhaust sound.

Valved Rear Axle-back Exhaust (Carbon Tips) - F97/F98 X3M/X4M ...

T#:51039997

Part#: 11-103C

Ships in 4 Business Days

$ 2,944.00 USD

Add to Wish List

Qty

$ 2,944.00 USD

Add to Wish List

At Active Autowerke, performance is about more than peak numbers. It’s about delivering a driving experience that feels sharper, sounds better, and maintains the refinement expected from a modern BMW. With over four decades of BMW performance development behind it, the F97/F98 X3M/X4M rear exhaust was engineered to give the S58-powered platform the deeper, more assertive tone many owners feel the factory system lacks. This axle-back system increases exhaust presence while preserving proper flow and daily drivability. By retaining the factory valve actuators, the system maintains full OEM functionality — delivering an aggressive note with the valves open and a controlled, composed tone when closed. On its own, the rear section provides a noticeable but refined sound improvement. For owners looking to maximize both sound and performance, the system pairs effectively with Active Autowerke mid-pipes and catted downpipes. Construction focuses on durability and consistent fit. The exhaust is manufactured from high-quality 304 stainless steel and each unit is test-fit on Active Autowerke’s dedicated F97/F98 fixture to ensure proper alignment and installation. Important Fitment Information A version is available for vehicles retaining the factory mid-pipes. If you later upgrade to an Active Autowerke or other aftermarket mid-pipe, different connecting pipes may be required. Sound Note: The rear section alone offers a refined increase in volume. The most significant sound change occurs when paired with an upgraded mid-pipe. Product Highlights Designed and manufactured in the USA Constructed from durable 304 stainless steel Deeper, more aggressive tone while retaining factory valve control Reuses OEM BMW exhaust valve actuators Each system test-fit on F97/F98 exhaust fixture Guaranteed fitment for F97/F98 BMW X3M and X4M Includes all necessary installation hardware

Show More Show Less

Active Autowerke Valved Rear Axle-back Exhaust (Brushed Tips) - F97/F...

T#:31522900

Part#: 11-103

Ships in 4 Business Days

$ 2,374.99 USD

Add to Wish List

Qty

$ 2,374.99 USD

Add to Wish List

At Active Autowerke, performance is about more than peak numbers. It’s about delivering a driving experience that feels sharper, sounds better, and maintains the refinement expected from a modern BMW. With over four decades of BMW performance development behind it, the F97/F98 X3M/X4M rear exhaust was engineered to give the S58-powered platform the deeper, more assertive tone many owners feel the factory system lacks. This axle-back system increases exhaust presence while preserving proper flow and daily drivability. By retaining the factory valve actuators, the system maintains full OEM functionality — delivering an aggressive note with the valves open and a controlled, composed tone when closed. On its own, the rear section provides a noticeable but refined sound improvement. For owners looking to maximize both sound and performance, the system pairs effectively with Active Autowerke mid-pipes and catted downpipes. Construction focuses on durability and consistent fit. The exhaust is manufactured from high-quality 304 stainless steel and each unit is test-fit on Active Autowerke’s dedicated F97/F98 fixture to ensure proper alignment and installation. Important Fitment Information A version is available for vehicles retaining the factory mid-pipes. If you later upgrade to an Active Autowerke or other aftermarket mid-pipe, different connecting pipes may be required. Sound Note: The rear section alone offers a refined increase in volume. The most significant sound change occurs when paired with an upgraded mid-pipe. Product Highlights Designed and manufactured in the USA Constructed from durable 304 stainless steel Deeper, more aggressive tone while retaining factory valve control Reuses OEM BMW exhaust valve actuators Each system test-fit on F97/F98 exhaust fixture Guaranteed fitment for F97/F98 BMW X3M and X4M Includes all necessary installation hardware

Show More Show Less

Active Autowerke Valved Rear Axle-back Exhaust (Black Tips) - F97/F98...

T#:51039980

Part#: 11-103B

Ships in 4 Business Days

$ 3,799.00 USD

Add to Wish List

Qty

$ 3,799.00 USD

Add to Wish List

At Active Autowerke, performance is about more than peak numbers. It’s about delivering a driving experience that feels sharper, sounds better, and maintains the refinement expected from a modern BMW. With over four decades of BMW performance development behind it, the F97/F98 X3M/X4M rear exhaust was engineered to give the S58-powered platform the deeper, more assertive tone many owners feel the factory system lacks. This axle-back system increases exhaust presence while preserving proper flow and daily drivability. By retaining the factory valve actuators, the system maintains full OEM functionality — delivering an aggressive note with the valves open and a controlled, composed tone when closed. On its own, the rear section provides a noticeable but refined sound improvement. For owners looking to maximize both sound and performance, the system pairs effectively with Active Autowerke mid-pipes and catted downpipes. Construction focuses on durability and consistent fit. The exhaust is manufactured from high-quality 304 stainless steel and each unit is test-fit on Active Autowerke’s dedicated F97/F98 fixture to ensure proper alignment and installation. Important Fitment Information A version is available for vehicles retaining the factory mid-pipes. If you later upgrade to an Active Autowerke or other aftermarket mid-pipe, different connecting pipes may be required. Sound Note: The rear section alone offers a refined increase in volume. The most significant sound change occurs when paired with an upgraded mid-pipe. Product Highlights Designed and manufactured in the USA Constructed from durable 304 stainless steel Deeper, more aggressive tone while retaining factory valve control Reuses OEM BMW exhaust valve actuators Each system test-fit on F97/F98 exhaust fixture Guaranteed fitment for F97/F98 BMW X3M and X4M Includes all necessary installation hardware

Show More Show Less

Seatbelt 6-point Race Harness Receptacles - Macht Schnell

T#:338507

Part#: 79.20.150K

Ships on Aug 19, 2026

Starting at $ 174.00 USD

Add to Wish List

Starting at $ 174.00 USD

Add to Wish List

Many racing series and event organizers are requiring 5 or 6-point harnesses in their events now. Attaching the anchor points to the seat base is a desired alternative to drilling holes in your floor and carpet*. This set includes the 6-point anchor to attach to the Macht Schnell floor mount as well as side attachments for either a bolt-in or snap-in harness.

* - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Akrapovic Sound Kit- F97/F98 X3M/X4M

T#:597424

Part#: P-HF1255

Back Ordered

$ 689.99 USD

Add to Wish List

Qty

$ 689.99 USD

Add to Wish List

The Akrapovic Sound Kit is a wireless exhaust valve control system that allows you full control over the valve system in your titanium Akrapovic exhaust. This enables you to open the exhaust valve when you want to turn as many heads as possible or keep it closed when your out for an easy Sunday drive.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...

BBS Center Cap - Black/Gold - 70.6mm

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

BBS Center Cap - Black/Silver - 56mm

BMW F8X G8X Exhaust Valve Cable Extender

BBS Center Cap - Black/Silver - 70.6mm

Active Autowerke BMW S58 F97/F98 X3M/X4M Downpipes w GESI CAT ...

Active Autowerke Signature Trunk Emblem

BBS Center Cap - Polished/Grey - 56mm

M14x1.5, 19mm Lug Nut - Black

Akrapovic Rear Exhaust Tip Set - Carbon - F97

Akrapovic Slip-On Titanium Exhaust System - Requires Tips - F97/F98 X...

Active Autowerke BMW S58 F97/F98 X3M/X4M Downpipes W Aflow CATs ...

Valved Rear Axle-back Exhaust (Carbon Tips) - F97/F98 X3M/X4M ...

Active Autowerke Valved Rear Axle-back Exhaust (Brushed Tips) - F97/F...

Active Autowerke Valved Rear Axle-back Exhaust (Black Tips) - F97/F98...

Seatbelt 6-point Race Harness Receptacles - Macht Schnell

Akrapovic Sound Kit- F97/F98 X3M/X4M

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results