BMW's newest high-performance powertrain—the S58B30—has proven to be an extremely durable platform built to last! Unfortunately, its factory oil cooler location is an egregious weak link in an otherwise bulletproof oiling system. Positioned just inches above the ground, the engine oil cooler is vulnerable to damage from debris, potholes, parking blocks, and other unavoidable road hazards. A single impact has the potential to rupture the cooler’s delicate aluminum fins and tubes, resulting in rapid oil loss and catastrophic low oil pressure. The only factory protection for this part is a flimsy undertray.

To safeguard the oil cooler, we've engineered a high-strength Aluminum Skid Plate for the F97 X3M and F98 X4M. Designed for peak performance and protection, our skid plate acts as a shield, preventing damage to the oil cooler while maintaining proper cooling efficiency.

Crafted from 4GA (4.83mm) 5052 aluminum, our skid plate delivers a perfect balance of strength and weight savings. Unlike the fragile factory plastic belly pan, our design forms a protective barrier from the front bumper to the front subframe, shielding your oil cooler and other fragile componentry from unexpected impacts. Its sturdy one-piece design enhances underbody rigidity without adding unnecessary weight over the front axle.

At Turner Motorsport, we believe protection shouldn't come at the cost of performance. Our engineers aimed to outperform the factory undertray design with laser-cut air channels that optimize airflow through the oil cooler. While located under the engine, the oil cooler receives its fresh airflow from the front air dam. Air flows through the lower front grille, into the oil cooler core, and out of the skid plate. The factory belly pan allows air to bypass the core, leading to inefficient cooling and mediocre airflow at speed. Our design allows for efficient heat dissipation by incorporating flared air channels, which guide cool air through the oil cooler and deflect road debris before it can reach the fragile core.

Upgrade your F97 X3M or F98 X4M with the Turner Motorsport Aluminum Skid Plate for added protection, durability, and performance.

Features & Benefits:

Forward-angled leading edge: Deflects road debris before it can reach critical components Rear-facing flared air channel: Ensures efficient ventilation and heat dissipation Heavy-duty 5052 aluminum construction: Tougher than stock, lightweight design Premium Wrinkle Black Powdercoat: Provides a resilient, yet brilliant-looking finish Optimized airflow channels: Keeps your oil cooler running at peak efficiency Reinforced protection: Shields vital engine components from road debris Factory mounting points: 100% bolt-on or off, no modifications needed Made in the USA: Engineered for quality and durability Kit Includes:

Turner Motorsport Aluminum Skid Plate – Wrinkle Black Hex Bolts (2) – SN5x35mm C-Clip Inserts (2) 6mm Skid Plate Spacers (2) Installation & Support:

For your convenience, we've provided a step-by-step installation guide, including detailed removal instructions, bolt locations, and torque values.

Enhance Vehicle Appearance with Clinched Fender Flares

Crafted from impact-resistant ABS plastic, Clinched manufactures fender flares akin to OE bumpers, ensuring both durability and lightweight properties. These adaptable fender flares offer universal fitting, suitable for various vehicle makes and models with minimal adjustments. Choose between seamlessly blending them with the car's body or showcasing them with visible rivets and edges.

Installation involves rivets and bolts, requiring drilling and cutting of the original fenders for proper fitting. Utilize a heat gun or hair dryer to heat and mold the flares, allowing them to conform to the factory body lines. Their remarkable pliability distinguishes them from fiberglass flares.

Clinched Fender Flares: Versatile and Impact-Resistant

Revamp your vehicle's appearance with Clinched Fender Flares, expertly crafted from high-quality, impact-resistant ABS plastic, ensuring strength and lightweight construction similar to OE bumpers. Designed for versatility, these universal flares offer compatibility with various makes and models, allowing easy installation with minor adjustments. Customize your vehicle's look by blending the flares seamlessly with the car's body or leaving them with exposed rivets and edges.

Clinched Flares are installed using rivets and bolts, requiring drilling and cutting of the original fenders for installation. Heat the flares with a heat gun or hair dryer to mold them precisely along the factory body lines. These flares stand out due to their high pliability, distinguishing them from fiberglass alternatives.

9cm "Classic" Universal Fender Flares - Pair are expertly crafted by Clinched from high-quality, impact-resistant ABS plastic, a material commonly used for OEM bumpers. These fender flares are designed to be versatile and can fit a wide range of makes and models with minimal customization.

• Durable Construction: Made from high-quality ABS plastic, offering strength and lightweight properties.
• Universal Fit: Can be installed on various vehicle makes and models with minor adjustments.
• Customizable Appearance: Can be blended with the vehicle body or left with exposed rivets and edges for a distinctive look.
• Easy Installation: Requires drilling and cutting of original fenders; use a heat gun to mold the flares to factory body lines.
• Pliable Material: More flexible compared to fiberglass flares, allowing for easier customization.

These fender flares are installed using rivets and bolts, ensuring a secure fit. The pliable nature of the ABS plastic allows for easy molding and adherence to your vehicle’s contours.

Upgrade the appearance and durability of your BMW with Clinched Universal Fender Flares. Crafted from high-quality, impact-resistant ABS plastic, these fender flares offer strength and lightweight performance. They are designed to be versatile, suitable for installation on various makes and models with minimal customization. Whether blended with the car body or left with exposed rivets and edges, Clinched Flares provide a distinctive look.

• Made from high-quality ABS plastic for durability
• Universal design for versatile installation
• Can be blended with the car body or left with exposed rivets and edges
• Includes Type 3 hardware kit for installation
• Alternate hardware available for fine-tuning fitment

Enhance Repairs for Your BMW and MINI with Wurth Fix All 2-Part Adhesive 50 Ml

Ensure efficient repairs for your BMW and MINI with Wurth Fix All 2-Part Adhesive 50 Ml. This adhesive offers high strength and excellent adhesion to various materials like SMC, fiberglass, metal, and aluminum. It efficiently bonds and holds backer panels in place, speeding up repair processes. Whether it's reinforcing tears, cracks, or holes in plastic parts or repairing plastic tabs, this adhesive delivers reliable results. Its fast cure time of 2-3 minutes and longer shelf life make it ideal for quick fixes. Each pack includes 2 turbo mixers for convenient application.

• Bonds and holds backer panels in place for faster repairs
• High strength and excellent adhesion to various materials
• Ideal for reinforcing tears, cracks, or holes in plastic parts
• Suitable for repairing plastic tabs
• Fast cure time of 2 - 3 minutes
• Longer shelf life for extended usability

Flush License Plate Bolt - 12mm

Upgrade your vehicle's aesthetics with the Flush License Plate Bolt - 12mm, designed to seamlessly blend into your license plate for a sleek appearance. Crafted from durable materials, this bolt offers both style and functionality. Its low-profile design ensures a clean look while providing secure attachment. Enhance your vehicle's exterior with this easy-to-install accessory.

• Sleek and seamless appearance
• Durable construction for long-lasting use
• Low-profile design for a clean look
• Easy installation process

Is your BMW hood emblem showing signs of wear and tear?

If it's cracked or faded, it's time for a replacement. Introducing the Roundel removal tool, designed specifically for effortless removal of your old emblem and installation of the new one. Made with durable nylon, this tool is both thin enough to fit under the roundel and strong enough to avoid breakage. Say goodbye to your old emblem with ease and give your BMW a fresh, shiny upgrade.

Benefits:

• Effortlessly removes old hood emblems
• Facilitates easy installation of new emblems
• Durable nylon construction ensures longevity
• Compatible with various BMW models