The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.
Show More Show Less
Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.
The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.
At Active Autowerke, performance is about more than peak numbers. It’s about delivering a driving experience that feels sharper, sounds better, and maintains the refinement expected from a modern BMW. With over four decades of BMW performance development behind it, the F97/F98 X3M/X4M rear exhaust was engineered to give the S58-powered platform the deeper, more assertive tone many owners feel the factory system lacks. This axle-back system increases exhaust presence while preserving proper flow and daily drivability. By retaining the factory valve actuators, the system maintains full OEM functionality — delivering an aggressive note with the valves open and a controlled, composed tone when closed. On its own, the rear section provides a noticeable but refined sound improvement. For owners looking to maximize both sound and performance, the system pairs effectively with Active Autowerke mid-pipes and catted downpipes. Construction focuses on durability and consistent fit. The exhaust is manufactured from high-quality 304 stainless steel and each unit is test-fit on Active Autowerke’s dedicated F97/F98 fixture to ensure proper alignment and installation. Important Fitment Information A version is available for vehicles retaining the factory mid-pipes. If you later upgrade to an Active Autowerke or other aftermarket mid-pipe, different connecting pipes may be required. Sound Note: The rear section alone offers a refined increase in volume. The most significant sound change occurs when paired with an upgraded mid-pipe. Product Highlights Designed and manufactured in the USA Constructed from durable 304 stainless steel Deeper, more aggressive tone while retaining factory valve control Reuses OEM BMW exhaust valve actuators Each system test-fit on F97/F98 exhaust fixture Guaranteed fitment for F97/F98 BMW X3M and X4M Includes all necessary installation hardware
Show More Show Less
The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.
Show More Show Less
The VTT S58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.
Show More Show Less
The Vargas High-Flow -16 Catch Can System is an essential for high-horsepower BMW X3M and X4M owners looking to manage crankcase pressure and oil blow-by.
Engineered for the demands of high-performance racing, the VTT S58 Remote Oil Filter Kit is a modular oiling upgrade designed to optimize the BMW S58 platform.
For dedicated drag racing applications where every ounce of weight and simplicity matters, the VTT S58 Remote Oil Plate is the ultimate "delete" solution.
At Active Autowerke, performance is about more than peak numbers. It’s about delivering a driving experience that feels sharper, sounds better, and maintains the refinement expected from a modern BMW. With over four decades of BMW performance development behind it, the F97/F98 X3M/X4M rear exhaust was engineered to give the S58-powered platform the deeper, more assertive tone many owners feel the factory system lacks. This axle-back system increases exhaust presence while preserving proper flow and daily drivability. By retaining the factory valve actuators, the system maintains full OEM functionality — delivering an aggressive note with the valves open and a controlled, composed tone when closed. On its own, the rear section provides a noticeable but refined sound improvement. For owners looking to maximize both sound and performance, the system pairs effectively with Active Autowerke mid-pipes and catted downpipes. Construction focuses on durability and consistent fit. The exhaust is manufactured from high-quality 304 stainless steel and each unit is test-fit on Active Autowerke’s dedicated F97/F98 fixture to ensure proper alignment and installation. Important Fitment Information A version is available for vehicles retaining the factory mid-pipes. If you later upgrade to an Active Autowerke or other aftermarket mid-pipe, different connecting pipes may be required. Sound Note: The rear section alone offers a refined increase in volume. The most significant sound change occurs when paired with an upgraded mid-pipe. Product Highlights Designed and manufactured in the USA Constructed from durable 304 stainless steel Deeper, more aggressive tone while retaining factory valve control Reuses OEM BMW exhaust valve actuators Each system test-fit on F97/F98 exhaust fixture Guaranteed fitment for F97/F98 BMW X3M and X4M Includes all necessary installation hardware
Show More Show Less
The VTT 6-Bar MAP sensor kit provides the necessary overhead to monitor boost levels with a linear voltage scale that makes software calibration straightforward.
The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.
If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.
The VTT-FAB-038 Billet Front Oil Feed Block-Off is a precision-engineered solution for enthusiasts and fabricators building custom turbocharger systems.
