BMW Engine Parts for BMW F98 X4 M S58 3.0L

Our B Series ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Ignition coils are responsible for 1/3 the operation your engine and it would be smart to weigh the options when shopping. Turner B Series ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
Direct fitment
Signature Turner Blue finish

BMW's newest high-performance powertrain—the S58B30—has proven to be an extremely durable platform built to last! Unfortunately, its factory oil cooler location is an egregious weak link in an otherwise bulletproof oiling system. Positioned just inches above the ground, the engine oil cooler is vulnerable to damage from debris, potholes, parking blocks, and other unavoidable road hazards. A single impact has the potential to rupture the cooler’s delicate aluminum fins and tubes, resulting in rapid oil loss and catastrophic low oil pressure. The only factory protection for this part is a flimsy undertray.

To safeguard the oil cooler, we've engineered a high-strength Aluminum Skid Plate for the F97 X3M and F98 X4M. Designed for peak performance and protection, our skid plate acts as a shield, preventing damage to the oil cooler while maintaining proper cooling efficiency.

Crafted from 4GA (4.83mm) 5052 aluminum, our skid plate delivers a perfect balance of strength and weight savings. Unlike the fragile factory plastic belly pan, our design forms a protective barrier from the front bumper to the front subframe, shielding your oil cooler and other fragile componentry from unexpected impacts. Its sturdy one-piece design enhances underbody rigidity without adding unnecessary weight over the front axle.

At Turner Motorsport, we believe protection shouldn't come at the cost of performance. Our engineers aimed to outperform the factory undertray design with laser-cut air channels that optimize airflow through the oil cooler. While located under the engine, the oil cooler receives its fresh airflow from the front air dam. Air flows through the lower front grille, into the oil cooler core, and out of the skid plate. The factory belly pan allows air to bypass the core, leading to inefficient cooling and mediocre airflow at speed. Our design allows for efficient heat dissipation by incorporating flared air channels, which guide cool air through the oil cooler and deflect road debris before it can reach the fragile core.

Upgrade your F97 X3M or F98 X4M with the Turner Motorsport Aluminum Skid Plate for added protection, durability, and performance.

Features & Benefits:

Forward-angled leading edge: Deflects road debris before it can reach critical components Rear-facing flared air channel: Ensures efficient ventilation and heat dissipation Heavy-duty 5052 aluminum construction: Tougher than stock, lightweight design Premium Wrinkle Black Powdercoat: Provides a resilient, yet brilliant-looking finish Optimized airflow channels: Keeps your oil cooler running at peak efficiency Reinforced protection: Shields vital engine components from road debris Factory mounting points: 100% bolt-on or off, no modifications needed Made in the USA: Engineered for quality and durability Kit Includes:

Turner Motorsport Aluminum Skid Plate – Wrinkle Black Hex Bolts (2) – SN5x35mm C-Clip Inserts (2) 6mm Skid Plate Spacers (2) Installation & Support:

For your convenience, we've provided a step-by-step installation guide, including detailed removal instructions, bolt locations, and torque values.

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

• Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
• Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
• Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
• High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

• Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
• Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
• Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
• Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
• Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Located at the rear of the cylinder head, this essential component controls the central VANOS (variable camshaft timing) valve. Often, these actuators fail due to oil contamination and electrical issues, leading to drivability problems and illuminated check engine lights.

Thankfully, URO Parts offers an affordable, high-quality replacement that functions just like the original factory part.

Features:

Guaranteed Fit: Designed for perfect compatibility with your vehicle. Durable Construction: Made from high-strength materials that resist engine heat and vibration. Precise Manufacturing: Built to OE dimensions for accurate clearances and alignment. Optimal Performance: Matches OE specifications to ensure proper timing at all engine speeds. URO Parts boasts an impressive catalog of over 8,000 premium spare parts, many of which are specifically engineered to replace factory BMW components. With a strong commitment to precision, durability, and value, URO Parts ensures each part meets the highest standards. For reliable and cost-effective replacement components, URO Parts is the go-to choice.

Key Features:

Ensures a perfect fit for your vehicle Instantly restores proper sealing and fuel delivery by replacing the failed fuel pump o-ring Features a direct-fit OE-style design for easy installation and extended durability Crafted from high-quality elastomer material capable of withstanding exposure to corrosive hydrocarbon fuel and intense vehicle heat