BMW Engine Parts for BMW F98 X4 M S58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:
Motiv ReFlex+ for BMW
Motiv ReFlex+ for BMW
Motiv Motorsports - Corporate Logo
T#:17970629
Part#: RFXF02UI6
In Stock
$ 859.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 859.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less
BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor
BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor
Motiv Motorsports - Corporate Logo
T#:28537533
Part#: 101-0216
In Stock
$ 105.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 105.00 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

  • Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
  • Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
  • Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
  • High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less
BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness
BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness
For Vehicles With Motiv ReFlex Unit Currently Installed Only
Motiv Motorsports - Corporate Logo
T#:22723690
Part#: 101-0212
In Stock
$ 49.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.00 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

  • Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
  • Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
  • Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
  • No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less
BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6
BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6
Motiv Motorsports - Corporate Logo
T#:29201081
Part#: 900.1008
In Stock
$ 200.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 200.00 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

  • Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
  • Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
  • Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
  • Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
  • Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less
Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6
Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...
Motiv Motorsports - Corporate Logo
T#:29234298
Part#: 910.1011
In Stock
$ 479.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 479.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.
Show More Show Less
VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/B58TU/B58TU2) & S58 3.0L
VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...
Vargas Turbo Technologies - Corporate Logo
T#:49822557
Part#: VTTBS58BLOCK
Ships in 10 Business Days
New Item
$ 29.99 USD
Free Shipping
Add to Wish List
$ 29.99 USD
Free Shipping
Add to Wish List
The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.
Show More Show Less
Motiv ReFlex+ Control Unit
Motiv ReFlex+ Control Unit
Motiv Motorsports - Corporate Logo
T#:29101684
Part#: 900.1001
In Stock
$ 729.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 729.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.
Show More Show Less
ReFlex+ Install Harness - Flying Lead
ReFlex+ Install Harness - Flying Lead
Motiv Motorsports - Corporate Logo
T#:29201083
Part#: 900.1016
In Stock
$ 95.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 95.00 USD
Free Shipping on orders $49 and up
Add to Wish List
A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal
Show More Show Less
3/8" Quick Disconnect Adapter With 1/8" NPT Port
3/8" Quick Disconnect Adapter With 1/8" NPT Port
Motiv Motorsports - Corporate Logo
T#:29500156
Part#: 200.1105
In Stock
$ 24.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 24.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Quick disconnect adapters (QDA) are commonly used to adapt different components into vehicle fuel systems without requiring permanent modification. These adapters are machined from high-grade aluminum and anodized for corrosion resistance. QDAs incorporate Viton© o-rings which are compatible with most types of fuel, solvents and oils. QDAs maintain a reliable leak-proof seal under normal fuel injection system operating pressures. This particular QDA is sized perfectly to adapt right between the fuel line you were going to connect to your ethanol sensor. 3/8" (9.5mm) female quick disconnect 3/8" (9.5mm) male quick disconnect 1/8" Female pipe thread port * Viton© o-rings Crecent-lock system E-85 compatible Black anodized aluminum
Show More Show Less
Universal Valve Spring Compressor
Universal Valve Spring Compressor
Performance Tool - Corporate Logo
T#:1809130
Part#: W89409
In Stock at Vendor
$ 126.99 USD
Free Shipping
Add to Wish List
$ 126.99 USD
Free Shipping
Add to Wish List
For servicing overhead valve engine with cylinder head removed.
Vargas S58 One Way Crankcase Breather - BMW S58 3.0L
Vargas S58 One Way Crankcase Breather - BMW S58 3.0L
Vargas Turbo Technologies - Corporate Logo
T#:697896
Part#: VTT-S58-BREATHER
Ships in 10 Business Days
$ 127.99 USD
Free Shipping
Add to Wish List
$ 127.99 USD
Free Shipping
Add to Wish List
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW S58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all S58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter NOTE: NOT ALL THE S58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.
Show More Show Less
ReFlex+ Advanced I/O Integration - BMW B58/S58 Plug-n-Play - MOTIV/Visconti Kit W/ PTCAN2 CAN Bus
ReFlex+ Advanced I/O Integration - BMW B58/S58 Plug-n-Play - MOTIV/Vi...
Motiv Motorsports - Corporate Logo
T#:49648341
Part#: 910.1027
In Stock
New Item
$ 1,344.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,344.00 USD
Free Shipping on orders $49 and up
Add to Wish List
NOTE: Select PT-CAN2 for all MHD+ and EcuTek cars with automatic transmissions. For BM3 and all manual transmission cars select PT-CAN.
407 Piece O-Ring Assortment
407 Piece O-Ring Assortment
Performance Tool - Corporate Logo
T#:1809147
Part#: W5202
In Stock at Vendor
$ 21.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 21.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Nitrile Butadiene Rubber
3/8" Dr. 5/8" Extended Spark Plug Socket
3/8" Dr. 5/8" Extended Spark Plug Socket
Performance Tool - Corporate Logo
T#:2242226
Part#: W80533
Ships in 1 Business Day
$ 20.25 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 20.25 USD
Free Shipping on orders $49 and up
Add to Wish List
Extended socket length reaches confined areas.
ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport
ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport
Motiv Motorsports - Corporate Logo
T#:29201085
Part#: 200.1058
Ships in 1 Business Day
$ 794.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 794.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products. With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).
Show More Show Less
Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5
Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5
Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships in 10 Business Days
New Item
$ 31.99 USD
Free Shipping
Add to Wish List
$ 31.99 USD
Free Shipping
Add to Wish List
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.
Piston Ring Comp 3-1/2" to 7"
Piston Ring Comp 3-1/2" to 7"
Performance Tool - Corporate Logo
T#:2242223
Part#: W80573
Ships in 1 Business Day
$ 22.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 22.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Use to install pistons on most passenger cars and truck engines
VTT S58 Turbocharger Install Kit - BMW S58 3.0L
VTT S58 Turbocharger Install Kit - BMW S58 3.0L
Vargas Turbo Technologies - Corporate Logo
T#:49023067
Part#: VTT-S58-INSTL
Ships in 10 Business Days
New Item
$ 284.99 USD
Free Shipping
Add to Wish List
$ 284.99 USD
Free Shipping
Add to Wish List
Everything needed for a successful install without having to make a trip to the dealer
Autel Autolink AL329
Autel Autolink AL329
Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
OBDII Code Reader
Piston Ring Comp 2-1/8" to 5"
Piston Ring Comp 2-1/8" to 5"
Performance Tool - Corporate Logo
T#:2242222
Part#: W80572
Ships in 1 Business Day
$ 21.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 21.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Use to install pistons on most passenger cars and truck engines
Vargas Ignition Coil Kit (Red) - B58/B48/S58
Vargas Ignition Coil Kit (Red) - B58/B48/S58
Vargas Turbo Technologies - Corporate Logo
T#:5309604
Part#: VTT-COIL-B58-RED
Ships in 9 Business Days
$ 222.99 USD
Free Shipping
Add to Wish List
$ 222.99 USD
Free Shipping
Add to Wish List
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID
VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...
Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
Add to Wish List
$ 37.99 USD
Free Shipping
Add to Wish List
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.
419 Piece Metric O-Ring Assortment Kit
419 Piece Metric O-Ring Assortment Kit
Performance Tool - Corporate Logo
T#:641935
Part#: WLMW5203
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 19.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Many uses around the garage and home
Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58
Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58...
Vargas Turbo Technologies - Corporate Logo
T#:51778123
Part#: VTT-S58-SINGLE-H
In Stock
New Item
$ 349.00 USD
Free Shipping
Add to Wish List
$ 349.00 USD
Free Shipping
Add to Wish List
The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.
Oil Level Sensor
Oil Level Sensor
Vitesco Technologies - Corporate Logo
T#:39261793
Part#: 12615A740A3
In Stock
Sale - Save 5% $ 243.99

This product was last offered at the strikethrough price on
07-02-2026

$ 231.79 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 5%
$ 243.99

This product was last offered at the strikethrough price on
07-02-2026

$ 231.79 USD
Free Shipping on orders $49 and up
Add to Wish List
ReFlex+ Install Kit
ReFlex+ Install Kit
Motiv Motorsports - Corporate Logo
T#:29267513
Part#: 400.1001
In Stock
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Spark Plug Gap Gauge
Spark Plug Gap Gauge
Performance Tool - Corporate Logo
T#:1855998
Part#: W80535
Ships in 1-2 days
$ 1.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Easy to read markings to set gaps quickly and easily.
6pc Hook & Pick Set
6pc Hook & Pick Set
Performance Tool - Corporate Logo
T#:1855974
Part#: W942
In Stock
$ 8.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 8.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Includes straight, angled and combination picks
Vargas Ignition Coil Kit (Black) - B58/B48/S58
Vargas Ignition Coil Kit (Black) - B58/B48/S58
Vargas Turbo Technologies - Corporate Logo
T#:5309601
Part#: VTT-COIL-B58-BLK
Ships in 10 Business Days
$ 222.99 USD
Free Shipping
Add to Wish List
$ 222.99 USD
Free Shipping
Add to Wish List
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning
ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning
Motiv Motorsports - Corporate Logo
T#:29201087
Part#: 200.1103
Ships in 4 Business Days
$ 615.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 615.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Visconti Tuning teamed up with MOTIV as the first company to bring a plug-and-play harness to the community. After years of success and some of the fastest Supras and BMWs in the world using the harness, Visconti Tuning has improved upon an already fantastic offering.
Show More Show Less
Piston Ring Installer
Piston Ring Installer
Performance Tool - Corporate Logo
T#:1809133
Part#: W80575
Ships in 1 Business Day
$ 17.62 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 17.62 USD
Free Shipping on orders $49 and up
Add to Wish List
Comfortable vinyl grip handles.
120 pc Fuse Assortment
120 pc Fuse Assortment
Performance Tool - Corporate Logo
T#:1809154
Part#: W5368
Ships in 1 Business Day
$ 13.68 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 13.68 USD
Free Shipping on orders $49 and up
Add to Wish List
A must for any toolbox.
Battery Tender Plus Advanced Battery Charging System
Battery Tender Plus Advanced Battery Charging System
Battery Tender - Corporate Logo
T#:49892371
Part#: BTT0210128
In Stock at Vendor
New Item
$ 69.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 69.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Vargas Crank/Vibration Damper Bolts - M10 x 1.5
Vargas Crank/Vibration Damper Bolts - M10 x 1.5
Vargas Turbo Technologies - Corporate Logo
T#:51778130
Part#: VTT-BMW-DAMPER-B
Ships in 10 Business Days
New Item
$ 157.99 USD
Free Shipping
Add to Wish List
$ 157.99 USD
Free Shipping
Add to Wish List
Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.
Vargas Ignition Coil Kit (Blue) - B58/B48/S58
Vargas Ignition Coil Kit (Blue) - B58/B48/S58
Vargas Turbo Technologies - Corporate Logo
T#:5309599
Part#: VTT-COIL-B58-BLU
Ships in 10 Business Days
$ 220.99 USD
Free Shipping
Add to Wish List
$ 220.99 USD
Free Shipping
Add to Wish List
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW
Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...
Vargas Turbo Technologies - Corporate Logo
T#:52094552
Part#: VTT-DCS-EWG-W-AC
Ships in 10 Business Days
New Item
$ 1,049.99 USD
Free Shipping
Add to Wish List
$ 1,049.99 USD
Free Shipping
Add to Wish List
the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.
Vargas Front Oil Feed Block-Off - BMW S58 Engine
Vargas Front Oil Feed Block-Off - BMW S58 Engine
Vargas Turbo Technologies - Corporate Logo
T#:52094559
Part#: VTT-FAB-038
Ships in 10 Business Days
New Item
$ 21.99 USD
Free Shipping
Add to Wish List
$ 21.99 USD
Free Shipping
Add to Wish List
The VTT-FAB-038 Billet Front Oil Feed Block-Off is a precision-engineered solution for enthusiasts and fabricators building custom turbocharger systems.
Vargas Remote Oil Filter Plate & Fittings - -10AN - BMW S58
Vargas Remote Oil Filter Plate & Fittings - -10AN - BMW S58
Vargas Turbo Technologies - Corporate Logo
T#:52164924
Part#: S58OFILPLATE
Ships in 10 Business Days
New Item
$ 149.00 USD
Free Shipping
Add to Wish List
$ 149.00 USD
Free Shipping
Add to Wish List
For dedicated drag racing applications where every ounce of weight and simplicity matters, the VTT S58 Remote Oil Plate is the ultimate "delete" solution.
Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, S55, S58
Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...
Vargas Turbo Technologies - Corporate Logo
T#:52094591
Part#: VTT-FAB-062
Ships in 10 Business Days
New Item
$ 53.99 USD
Free Shipping
Add to Wish List
$ 53.99 USD
Free Shipping
Add to Wish List
If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.
Vargas High Flow Catch Can System - BMW F9X X3M, X4M
Vargas High Flow Catch Can System - BMW F9X X3M, X4M
Vargas Turbo Technologies - Corporate Logo
T#:51918845
Part#: VTT-HFCCF9X16
Ships in 10 Business Days
New Item
$ 649.00 USD
Free Shipping
Add to Wish List
$ 649.00 USD
Free Shipping
Add to Wish List
The Vargas High-Flow -16 Catch Can System is an essential for high-horsepower BMW X3M and X4M owners looking to manage crankcase pressure and oil blow-by.
VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU, B48, B46
VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU...
For vehicles with VTT Billet & Cast Valve Covers
Vargas Turbo Technologies - Corporate Logo
T#:52270290
Part#: OC16OADAPSC
Ships in 10 Business Days
New Item
$ 64.99 USD
Free Shipping
Add to Wish List
$ 64.99 USD
Free Shipping
Add to Wish List
Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.
Vargas Port Injector Block Off Blanks - BMW G8X F9X S58
Vargas Port Injector Block Off Blanks - BMW G8X F9X S58
Vargas Turbo Technologies - Corporate Logo
T#:52164927
Part#: S58PIBLOBLANKS
Ships in 10 Business Days
New Item
$ 112.99 USD
Free Shipping
Add to Wish List
$ 112.99 USD
Free Shipping
Add to Wish List
The PFS S58 Port Injection Block-Off Kit offers a robust and reliable way to seal secondary fuel ports in the S58 intake manifold.
Vargas Billet Extended Turbo Drain Adapter - Garrett G-Series
Vargas Billet Extended Turbo Drain Adapter - Garrett G-Series ...
For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos
Vargas Turbo Technologies - Corporate Logo
T#:52129707
Part#: VTT-FAB-064
Ships in 10 Business Days
New Item
$ 49.99 USD
Free Shipping
Add to Wish List
$ 49.99 USD
Free Shipping
Add to Wish List
The VTT-FAB-064 by Vargas is a precision-engineered solution for enthusiasts and fabricators building high-performance Garrett-based turbo systems.
VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU
VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...
Vargas Turbo Technologies - Corporate Logo
T#:51672705
Part#: VTT-S/B58-LP-CC-
Ships in 10 Business Days
New Item
$ 41.99 USD
Free Shipping
Add to Wish List
$ 41.99 USD
Free Shipping
Add to Wish List
The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.
Vargas Port Injection Block Off Injector Blanks With Rail - BMW G8X F9X S58
Vargas Port Injection Block Off Injector Blanks With Rail - BMW G8X F...
Vargas Turbo Technologies - Corporate Logo
T#:52164930
Part#: S58PIBLORAIL
Ships in 10 Business Days
New Item
$ 222.99 USD
Free Shipping
Add to Wish List
$ 222.99 USD
Free Shipping
Add to Wish List
Maximize the versatility of your BMW S58 fuel system with the Vargas Turbo Technologies Port Injection Block Off Kit with Rail.
Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58
Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58 ...
Vargas Turbo Technologies - Corporate Logo
T#:52094555
Part#: VTT-FAB-015
Ships in 10 Business Days
New Item
$ 21.99 USD
Free Shipping
Add to Wish List
$ 21.99 USD
Free Shipping
Add to Wish List
The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.
Vargas Billet Oil Drain Fitting Adapter - -10AN - BMW S58
Vargas Billet Oil Drain Fitting Adapter - -10AN - BMW S58
Vargas Turbo Technologies - Corporate Logo
T#:52094565
Part#: VTT-FAB-040-AN-S
Ships in 10 Business Days
New Item
$ 31.99 USD
Free Shipping
Add to Wish List
$ 31.99 USD
Free Shipping
Add to Wish List
The VTT-FAB-040 S58 AN Male flange is a precision-engineered solution designed specifically for the BMW S58 engine platform.
PFS Port Injection Kit - BMW G8X/F9X S58
PFS Port Injection Kit - BMW G8X/F9X S58
Vargas Turbo Technologies - Corporate Logo
T#:52164908
Part#: PFS-S58-PI-NONE
Ships in 10 Business Days
New Item
$ 949.99 USD
Free Shipping
Add to Wish List
$ 949.99 USD
Free Shipping
Add to Wish List
The PFS S58 Port Injection Kit by Vargas Turbo Technologies is the solution for BMW owners who have reached the limits of their factory injection.
Vargas Plug & Play Pre And Post Throttle MAP Sensor Kit - 6B 4W - BMW B58/S55/S58
Vargas Plug & Play Pre And Post Throttle MAP Sensor Kit - 6B 4W - BMW...
Vargas Turbo Technologies - Corporate Logo
T#:52129729
Part#: VTT56BSENSKIT64
Ships in 10 Business Days
New Item
$ 209.99 USD
Free Shipping
Add to Wish List
$ 209.99 USD
Free Shipping
Add to Wish List
The VTT 6-Bar MAP sensor kit provides the necessary overhead to monitor boost levels with a linear voltage scale that makes software calibration straightforward.
Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/G35
Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...
For vehicles with Electronic Waste Gate
Vargas Turbo Technologies - Corporate Logo
T#:51778114
Part#: VTT-FAB-BMW-EWG-
Ships in 10 Business Days
New Item
$ 79.99 USD
Free Shipping
Add to Wish List
$ 79.99 USD
Free Shipping
Add to Wish List
The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping