BMW Engine Parts for BMW G01 X3 xDrive30i B46 2.0L

Our B Series ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Ignition coils are responsible for 1/3 the operation your engine and it would be smart to weigh the options when shopping. Turner B Series ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
Direct fitment
Signature Turner Blue finish

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

Our B Series ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Ignition coils are responsible for 1/3 the operation your engine and it would be smart to weigh the options when shopping. Turner B Series ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
Direct fitment
Signature Turner Blue finish

Unlike traditional BMW engines, modern engines, like the B48 and B58, use a volume-flow-regulated oil pump. Instead of providing a consistent volume of oil, these new systems control oil supply at each individual operating range.

This Control Valve Solenoid is a critical component in the volume-flow-regulated oiling system. This piece seamlessly adjusts the oil pressure based on inputs from the DME. In the event of failure, this means the engine oil supply system may become restricted.

Thankfully, Bremmen Parts offers this high-quality, OE replacement Control Valve Solenoid at a fraction of Genuine price. Built with durability and fitment in mind, this component is an exact fit for your BMW.

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes:

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (8) Genuine BMW Connecting Rod Bolts (8) Assembly Lube (4 oz.)

Turner Motorsport presents the essential BMW Oil Filter, a crucial component for maintaining a healthy engine. Designed to prevent contaminants from causing premature engine failure, this OEM oil filter ensures optimal performance and longevity for your BMW. Don't compromise with cheap aftermarket replacements; choose the reliability of genuine BMW parts to safeguard your engine from small metal particles and ensure a fresh and vigorous driving experience for years to come.

• Vital Engine Protection: Safeguards the engine from contaminants for prolonged life.
• OEM Quality: Genuine BMW oil filter for reliable and consistent performance.
• Prevents Abrasion: Filters out small metal particles to prevent abrasion and wear.
• Ensures Longevity: Promotes the longevity of engine components.
• Maintains Engine Performance: Keeps the engine fresh and full of pep.

Upgrade your BMW's oiling system with the Turner Motorsport BMW Oil Filter.

The URO Camshaft Position Sensor is an essential component for BMW engines, providing precise data on camshaft position to ensure accurate fuel injection timing and peak engine performance. Designed to meet OEM specifications, this sensor helps optimize ignition timing, contributing to smoother acceleration, enhanced fuel economy, and overall engine efficiency. Available from Turner Motorsport, the URO Camshaft Position Sensor is the ideal replacement part for BMW owners aiming to maintain optimal performance and reliability.

• Ensures accurate timing for smooth acceleration and responsive power
• Optimizes fuel injection timing, improving fuel efficiency
• Built to OEM standards for precise fit and easy installation in BMW models
• Supports reliable ignition timing for dependable engine operation
• Durable construction withstands high engine temperatures for lasting performance
• Available from Turner Motorsport, a trusted source for BMW replacement parts

The URO Camshaft Position Sensor is a cost-effective solution for BMW owners looking to keep their engine running smoothly and efficiently, delivering the performance and dependability they expect.