1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 24, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308462

Part#: 40060-BRD

In Stock at Vendor

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made

Show More Show Less

Stage 3 Boost Cooler (Direct Injection) - Braided Line

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14651267

Part#: SNO-320-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

High Flow Water Methanol Check Valve (Nylon Line)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374130

Part#: SNO-8CV

Ships in 6 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590418

Part#: 30-3304

In Stock at Vendor

11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

11% off MSRP

$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

Enhances performance and efficiency for BMW and MINI vehicles
Maximizes power output while ensuring engine safety
Internal MAP sensor for precise control
35PSI maximum pressure capacity for reliability
Improves horsepower, torque, and fuel economy

Show More Show Less

Billet 100 Micron Water Methanol Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374114

Part#: SNO-38FIL

Special Order: No Guaranteed ETA

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Black High Temp Nylon Water Methanol Tubing - 20'

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815165

Part#: SNO-80088

Special Order: No Guaranteed ETA

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Snow Performance 20' Bag High Temp Nylon Water Methanol Tubing 100% Methanol Resistant 800 PSI Burst Rating Black

Water-Methanol Braided SS Line Trunk Mount Upgrade (4AN SS Braided Li...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308470

Part#: SNO-40012-BRD

In Stock

7% off MSRP $ 156.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 145.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 156.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 145.99 USD

Limited Qty Sale

Add to Wish List

Water-Methanol Braided SS Line Trunk Mount Upgrade (4AN SS Braided Line Systems) is designed to relocate your standard 3QT Snow Performance Water-Methanol Tank or any custom tank to the trunk of your vehicle. This upgrade includes everything necessary to safely move and secure your water-methanol system.

Comprehensive Kit: Includes 15 feet of stainless steel braided line, a high-flow solenoid upgrade, and all required AN fittings.
Durable Construction: Features high-quality, stainless steel braided lines for superior strength and resistance to wear.
Enhanced Performance: Designed to ensure optimal performance and reliability of your water-methanol system when relocated.
Easy Installation: Provides all necessary components for a straightforward trunk mount installation.
Versatile Application: Suitable for moving standard and custom water-methanol tanks to the trunk of any vehicle.

Show More Show Less

Water/Methanol Injection Hose - 20'

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

AEM Water/Methanol Injection System

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815164

Part#: 30-3326

In Stock

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

E6000 Sealant (.18 Oz)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374144

Part#: SNO-90001

In Stock

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

4AN "T" Fitting

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374143

Part#: SNO-806-BRD

In Stock at Vendor

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176934

Part#: BMS-WMI-SOL

Ships on Jul 24, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

2.5 Gal. Water-Methanol Tank Upgrade - Quick-Connect Fittings ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598939

Part#: SNO-40014

In Stock at Vendor

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

WMI Inline Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176933

Part#: BMS-WMI-FIL

Ships on Jul 24, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

Snow Performance 1/8NPT-1/4 Quick Connect Fitting

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2317850

Part#: SNO-82082R

Ships in 1 Business Day

23% off MSRP $ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD

Add to Wish List

Qty

23% off MSRP

$ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD

Add to Wish List

Water/Methanol Nozzle - 2.5GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374122

Part#: SNO-N0250

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

3GPH Water-Methanol Nozzle

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374115

Part#: SNO-N0300

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

High Flow Water-Methanol Check Valve 4AN Fittings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374126

Part#: SNO-8CV-BRD

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Nozzle Holder Straight (Rectangle Style)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308474

Part#: SNO-900

Ships in 1 Business Day

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Straight, rectangular single nozzle holder. 1/8" NPT.

Stage 3 Boost Cooler (EFI - Port Injection) - Nylon Line

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374154

Part#: SNO-310

In Stock at Vendor

$ 729.99 USD

Add to Wish List

Qty

$ 729.99 USD

Add to Wish List

Snow Performance 7 Gallon Reservoir (incl. brackets/check valve/tubin...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374142

Part#: 40016

In Stock at Vendor

28% off MSRP $ 218.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 156.99 USD

Add to Wish List

Qty

28% off MSRP

$ 218.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 156.99 USD

Add to Wish List

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3047546

Part#: SNO-211

In Stock at Vendor

$ 702.99 USD

Add to Wish List

Qty

$ 702.99 USD

Add to Wish List

Snow Performance Methanol Injection Ring - All BMW

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:589571

Part#: SNO-40111.40112

Ships in 1 Business Day

Starting at $ 359.98 USD

Add to Wish List

Starting at $ 359.98 USD

Add to Wish List

Choose either V-band or hose camp style rings to add methanol injection easily to almost any vehicle.

Boost Cooler Stage 2.5 Progressive Water/Methanol Injection Kit - no ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374113

Part#: SNO-210-BRD-T

In Stock at Vendor

$ 687.99 USD

Add to Wish List

Qty

$ 687.99 USD

Add to Wish List

Snow Performance Water Tank Upgrade - 7gal

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308472

Part#: SNO-40016-BRD

Ships in 1 Business Day

$ 260.99 USD

Add to Wish List

Qty

$ 260.99 USD

Add to Wish List

7 gal. water-methanol tank upgrade braided stainless line (w/brackets, solenoid, hose & all necessary fittings) (15lx17hx9w)

Water Injection 26.5l Trunk Mounting Kit - ProLine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37892117

Part#: SP30121PRO

Special Order: No Guaranteed ETA

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Union Tee

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640585

Part#: 82040

Special Order: No Guaranteed ETA

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Super Atomizing Water/Methanol Injection Nozzles

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Aug 6, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less