BMW X Series G05 X5 (2019+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Automatic Transmission Service Kit
For Pre-LCI models only
For GA8HP70Z or GA8HP45Z automatic transmissions
Packaged by Turner - Corporate Logo
T#:5389733
Part#: 24118612901TMSKT
In Stock
Sale - Save 23% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 166.09 USD
Free Shipping
Sale - Save 23%
$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 166.09 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles
Show More Show Less
Packaged by Turner - Corporate Logo
T#:23847536
Part#: LMSPC5W30KT
In Stock
$ 110.99 USD
Free Shipping on orders $49 and up

Maintain your driving machine's optimal performance with regular maintenance. BMW's recommended oil change intervals vary depending on driving habits. For enhanced performance, an oil change every 5,000 miles is advised for aggressive or city driving, while a maximum of 10,000 miles is recommended otherwise.

This comprehensive kit includes:

  • 7L Special Tec B 5W-30 Motor Oil
  • Engine Oil Filter with o-ring
  • Oil Drain Plug with o-ring

Ensure your BMW operates flawlessly with this premium service kit from Turner Motorsport.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:22130458
Part#: LMTPTCHOILCHNGKT
In Stock
$ 104.99 USD
Free Shipping on orders $49 and up
Ensuring your vehicle's peak performance relies on consistent maintenance. BMW's recommended oil change interval varies according to your driving habits. For optimal results, we advise changing the oil every 10,000 miles. However, for more aggressive or city driving, a 5,000-mile oil service interval is the preferred choice. This comprehensive kit includes: 7L of Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with an o-ring Oil Drain Plug with an o-ring Maintain the flawless operation of your BMW with this high-quality service kit from Turner Motorsport.
Show More Show Less

VTT “OBD-LOCK” ODB Port Locking Tool
For Vehicles Produced After 1995
Vargas Turbo Technologies - Corporate Logo
T#:26938503
Part#: VTT-OBD-LOCK
In Stock
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
VTT is proud to offer our “OBD-LOCK” OBD port locking tool. This is tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car’s OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:402850
Part#: N63LMOCP1
In Stock
Starting at $ 167.96 USD
Free Shipping
Starting at $ 167.96 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

Choose the level of Liqui Moly Oil Service your BMW deserves: 

  • Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
  • Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
  • Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
  • Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

Below you can add new drain plug and crush washer, along with your choice of oil filter.

This kit also features many Popular Service Tools that make your life easier when working on your BMW:

  • Turner Motorsport Magnetic Fender Cover
  • Schwaben 6.5L Fluid Extractor
  • Schwaben 14mm/17mm Service Wrench
  • Schwaben Professional BMW/MINI Scan Tool

Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

These products fit the following BMWs:

2011– 2013 E70 X5 xDrive50i
2008– 2013 E71 X6 xDrive50i
2009+ F01/F02 750i 750Li sDrive/xDrive 750i 750Li sDrive/xDrive
2010– 2012 F07 550i GT sDrive/xDrive
2011+ F10/F11 550i sDrive/xDrive
2012+ F12/F13 650i sDrive/xDrive 650i sDrive/xDrive
2013– F07 550i GT sDrive/xDrive
2014– F15 X5 xDrive50i

 

Show More Show Less
Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
Ships on Oct 12, 2026
Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:31191945
Part#: TMS8HPATSKT1
In Stock
Sale - Save 1% $ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Liqui-Moly Top Tec 1800 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7530036
Part#: COOLANTCAPBLUE
In Stock
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:38789900
Part#: BM-0113-P
In Stock
$ 195.00 USD
Free Shipping on orders $49 and up
To ensure the utmost perfection, Autotechnic products undergo rigorous tests and quality control procedures before release. Rest assured, you'll receive a premium product that meets the highest standards.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:7530034
Part#: COOLANTCAPRED
Ships in 2 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less
Prosport Performance - Corporate Logo
T#:385025
Part#: HEA-WRAPKIT-25
Ships in 2 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

Key Features:

  • 2" wide x 1/16" thick
  • Durable, tightly woven, 100% fiberglass
  • Reduce under hood temperatures
  • Protect other engine components
  • Protect your hands/arms from burns
  • Each roll comes with 5 FREE, 14" long stainless steel zip ties
Show More Show Less
Packaged by Turner - Corporate Logo
T#:21965984
Part#: B58TUIGNKT
Ships on Aug 12, 2026
Sale - Save 19% $ 392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.69 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.69 USD
Free Shipping on orders $49 and up
Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 NGK 96206 Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet
Show More Show Less


Packaged by Turner - Corporate Logo
T#:41863720
Part#: GN63OC2TKT
In Stock
$ 190.99 USD
Free Shipping on orders $49 and up
This Genuine BMW Oil Change Kit / Inspection I - 0w-30 from Turner Motorsport is a must-have for DIY maintenance or professional servicing. Keep your BMW running like new with factory-approved oil and components designed for unmatched performance, efficiency, and reliability.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:49822557
Part#: VTTBS58BLOCK
Ships on Aug 10, 2026
New Item
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39093015
Part#: BM-0321-B
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
Designed for effortless functionality, the Grab Handle Sunglasses Case is simple to install and features a one-hand switch for quick and easy access. A high-quality damping spring ensures the case closes slowly and securely, protecting your glasses from scratches and preventing any rattling while driving.
Show More Show Less

Prosport Performance - Corporate Logo
T#:385019
Part#: HEA-WRAPKIT-50
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up
Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!
Show More Show Less
B58TU / B48TU One Way Crankcase Breather - G Chassis
For models with the Gen2 B58 or B48 engines only (B58TU / B48TU)
Vargas Turbo Technologies - Corporate Logo
T#:25606657
Part#: VTTB58BREATHERTU
In Stock
$ 128.99 USD
Free Shipping
$ 128.99 USD
Free Shipping
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.
Show More Show Less

Prosport Performance - Corporate Logo
T#:385020
Part#: HEA-GWRAP-15
Back Ordered
$ 33.99 USD
Free Shipping on orders $49 and up
Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:1241340
Part#: 24118612901T3KT
Back Ordered
$ 480.99

This product was last offered at the strikethrough price on
06-19-2026

$ 480.00 USD
Free Shipping
$ 480.00 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:396026
Part#: UN-0001-CF
In Stock
$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 131.99 USD
Limited Qty Sale
Free Shipping
$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 131.99 USD
Limited Qty Sale
Free Shipping

AutoTecknic Universal Carbon Fiber Splitter

The AutoTecknic universal carbon fiber splitter offers an upgraded front-end aesthetic for your vehicle. Crafted with 3K plain weave carbon fiber and a UV clear coat, these splitters boast a lustrous mirror shine finish. Compatible with various bumpers upon proper installation, they deliver:

  • Made from 3K plain weave carbon fiber with a UV clear coat finish
  • Compatibility with various bumpers with appropriate installation
  • Pre-installation drilling for mounting holes required
  • Vehicle-specific installation hardware not included
  • Provides a sporty appearance without excessive aggressiveness
  • Shields the bumper against speed bumps and road dips
  • Enhances the overall vehicle appearance while ensuring protection

Designed for those seeking a subtle yet sporty visual enhancement, these splitters safeguard your bumper while boosting your car's aesthetics. Recommended by numerous customers for both its visual appeal and functional benefits.

Package Contents: One set of AutoTecknic universal carbon fiber splitters.

Splitter Dimensions: 21" (Length) x 10" (Depth) x 5" (Width)

Show More Show Less
Prosport Performance - Corporate Logo
T#:31390598
Part#: PSTOP270-12
In Stock at Vendor
$ 45.00 USD
Free Shipping on orders $49 and up

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED provides precise monitoring of engine oil pressure, ensuring that drivers can detect issues before they become catastrophic. This high-quality gauge is crucial for tracking engine performance and preventing potential damage.

  • Accurate Oil Pressure Monitoring: Measures oil pressure from 0-100 PSI, helping to prevent engine damage by providing early warnings.
  • Clear Lens: Offers a clear and unobstructed view of the gauge readings, making it easy to monitor engine health at a glance.
  • White LED Backlighting: Enhances readability in low-light conditions with a bright and clear display.
  • Complete Kit: Includes sender, mounting hardware, visor, decals, and instructions for easy installation.
  • Durable Construction: Designed to withstand the demands of high-performance driving and continuous use.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7292018
Part#: TISTUD201425
Back Ordered
Starting at $ 335.99 USD
Free Shipping
Starting at $ 335.99 USD
Free Shipping
VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M14x1.25x75mm on the small end to M14x1.5 on the long end. This will convert M14x1.25 cars into M14x1.5 pattern Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.
Show More Show Less


Prosport Performance - Corporate Logo
T#:389617
Part#: 216EVOEOP.PSI
In Stock
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Pressure Guage (0-150 PSI) 
  • Instructions
  • Mounting hardware
  • Decals
  • Premium Electric Sender 
  • Wiring harness adapter
  • Dual color display (Blue or Red)
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.
Radium Engineering - Corporate Logo
T#:27905095
Part#: 20-0024
In Stock at Vendor
$ 28.99 USD
Free Shipping on orders $49 and up

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose


AUTOTECKNIC - Corporate Logo
T#:395883
Part#: UN-0012-V2
Ships in 8 Business Days
$ 50.00 USD
Free Shipping on orders $49 and up
Our dry carbon fiber money clip is a better alternative to "lightening your wallet"

VTT Billet Coolant Reservoir Cap - Anodized Clear - Most BMWs 2006+ (...
This coolant cap retains ALL of the factory provisions by simply allowing you to snap t...
Vargas Turbo Technologies - Corporate Logo
T#:7530035
Part#: COOLANTCAPRAW
Ships in 4 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less
Packaged by Turner - Corporate Logo
T#:40309026
Part#: G05MSBRKKT
Ships in 1-2 days
$ 1,501.99

This product was last offered at the strikethrough price on
04-28-2026

$ 1,400.99 USD
$ 1,400.99 USD
Includes everything you need to service the brakes of your BMW and restore stopping power and performance! Included: Front and rear Genuine BMW rotors Front and rear Brembo NAO Ceramic pads Front and rear pad wear sensors Genuine BMW brake rotor set screws (x4) Genuine BMW Brake Pad Anti-Squeal Grease (x4)
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:10128424
Part#: VTT-ENGPLT-V2
Back Ordered
Starting at $ 112.99 USD
Free Shipping on orders $49 and up
Starting at $ 112.99 USD
Free Shipping on orders $49 and up
Do you work on a lot of BMW engines from various platforms? Tired of having to adjust universal engine stand plates to fit your engine? Hate not having access to the flywheel end with the engine on the stand? Vargas answered yes to all of those things and made a tool for anyone that works on BMWs often, and wanted a strong bolt-on engine stand plate that keeps the flywheel end of the engine open! The engine stand plates are machined from a solid billet of 6061-T6 aluminum and anodized in 5 colors for long-lasting corrosion resistance. These are lightweight, and rated for over 1200 lbs!
Show More Show Less
Autosol - Corporate Logo
T#:580275
Part#: AS7800
Back Ordered
$ 25.99 USD
Free Shipping on orders $49 and up
The proper protection for your convertible top.

AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

Packaged by Turner - Corporate Logo
T#:53644251
Part#: URO011913KT
In Stock
New Item
Sale - Save 1% $ 252.99

This product was last offered at the strikethrough price on
05-30-2026

$ 249.72 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 252.99

This product was last offered at the strikethrough price on
05-30-2026

$ 249.72 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39363085
Part#: BM-0613-LCI-GB
In Stock
$ 230.00 USD
Free Shipping on orders $49 and up
$ 230.00 USD
Free Shipping on orders $49 and up
Turner Motorsport offers the AutoTecknic Gloss Black Front Grille as a premium upgrade for BMW G05 X5 LCI owners who want to refine their vehicle’s aesthetics with a high-performance, race-inspired touch. Whether replacing a worn-out grille or personalizing the X5’s exterior, this grille provides an exceptional combination of style, durability, and precision engineering.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:29798952
Part#: 11288650740T1KT
Ships on Oct 27, 2026
Sale - Save 24% $ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD
Free Shipping on orders $49 and up
Sale - Save 24%
$ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD
Free Shipping on orders $49 and up
Having your accessory belt fail is a major inconvenience and can leave you on the side of the road if the alternator isn't charging and the mechanical water pump isn't turning. Over time the tensioner and the belt itself wears out and will eventually fail. This kit includes everything you need to service the belt drive system and keep everything in check. Included: ECS Tuning Kevlar Reinforced Performance Accessory Belt - Designed to resist OEM Febi Belt Tensioner Genuine BMW Tensioner Hardware
Show More Show Less


AUTOTECKNIC - Corporate Logo
T#:1790
Part#: TMS1790
Ships in 8 Business Days
$ 45.00 USD
Free Shipping on orders $49 and up

If you simply can not get enough carbon fiber in your life, then this will be a must have. Our simple men's bi-fold wallet features real carbon fiber and stitched soft black leather. It's meant to be thin, light weight and the carbon fiber is coated and flexible so that it is comfortable in your pocket.

This carbon fiber wallet features the following:

  • Nine credit card slots
  • Two hidden slots underneath the nine slots
  • Flip-out inside flap with clear window for your ID
  • Divider inside the currency portion, for cash, receipts, checks, etc
  • Wallet measures 3.75" x 4.5" (9.5cm x 11.5 cm)
  •  
Show More Show Less
VTT Billet/Silicone Cylinder Head Cooling Hose - B58TU
For vehicles with a production date from 10/17
Vargas Turbo Technologies - Corporate Logo
T#:29334026
Part#: VTT-B58TU-UCH
Ships in 10 Business Days
Starting at $ 209.99 USD
Free Shipping on orders $49 and up
Starting at $ 209.99 USD
Free Shipping on orders $49 and up

Positioned directly in the charge pipe's path, the stock B58TU upper cylinder head cooling hose, primarily made of plastic, is prone to damage. A dislodged charge pipe can easily take out this cooling hose, leading to severe engine damage through rapid coolant loss and overheating.

To address this vulnerability, VTT has engineered a robust solution. By replacing the OEM rubber hose with a durable 7-ply silicone variant, they offer superior resilience and longevity. Furthermore, they've upgraded the factory plastic flanges to 6061-T6 billet aluminum with black anodizing, enhancing corrosion resistance.

This upgraded hose is the ultimate solution, providing protection against dislodged charge pipes and the heat generated from spirited driving or track use.

Key Features:

Direct factory replacement for easy installation 6061-T6 billet aluminum with black anodizing for improved corrosion resistance Durable 7-ply silicone available in three colors Upgrade your BMW B58TU engine with this enhanced cooling hose from Vargas Turbo Technologies for superior performance and reliability.

Show More Show Less

Prosport Performance - Corporate Logo
T#:389626
Part#: 216EVOWGWT.F
Ships in 3 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:638811
Part#: VTT-B58-VACCUM
Ships in 10 Business Days
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39126833
Part#: BM-0321-G
Ships in 8 Business Days
$ 39.99 USD
Free Shipping on orders $49 and up
Designed for effortless functionality, the Grab Handle Sunglasses Case is simple to install and features a one-hand switch for quick and easy access. A high-quality damping spring ensures the case closes slowly and securely, protecting your glasses from scratches and preventing any rattling while driving.
Show More Show Less

Prosport Performance - Corporate Logo
T#:389634
Part#: 216EVOOT.F
Ships in 2 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or Red)
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships in 9 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Packaged by Turner - Corporate Logo
T#:30197950
Part#: 11129894803KT2
Ships in 3 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set Profile Gasket (HPFP) 2x O-ring (Camshaft Position Sensor) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:587399
Part#: 112886137071ABKT
Back Ordered
Sale - Save 18% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.57 USD
Free Shipping
Sale - Save 18%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.57 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.
Show More Show Less
Sunex - Corporate Logo
T#:391150
Part#: SUU884506
In Stock
9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
3/8" drive socket with 5/8" opening for most spark plugs
Packaged by Turner - Corporate Logo
T#:31191944
Part#: TMS8HPATSKT
In Stock
$ 256.99 USD
Free Shipping on orders $49 and up
$ 256.99 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Reline D6 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:554535
Part#: 8HPATSKT
In Stock
$ 384.54 USD
Free Shipping
$ 384.54 USD
Free Shipping

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

  • Automatic transmission filter with associated hardware
  • Oil pan gasket
  • Drain plug with sealing washer
  • Fill plug with sealing washer
  • 7 quarts automatic transmission fluid

Fits the following BMW chassis with 8 speed transmissions:
E70, E71, F01, F02, F06, F07, F10, F12, F13, F13, F15, F16, F22, F23, F25, F26, F30, F31, F32, F33, F34, F36, G11

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:641130
Part#: OILCAPBLUE1
Ships on Aug 10, 2026
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.
Show More Show Less