BMW X Series G05 X5 (2019+)

MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...

T#:340355

Part#: MSI-M14X125

In Stock

Starting at $ 25.98 USD

Add to Wish List

Starting at $ 25.98 USD

Add to Wish List

70MM, 80MM, OR 90MM OVERALL LENGTH
OUR HIGHEST-GRADE PREMIUM WHEEL STUD
DRY LUBE WITH BLACK M-PHOSPHATE COATING
STUD FOR RACE/TRACK USE
CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
USE WITH 14x1.5 NUT
For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.

These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
Heat-treated aircraft quality alloy steel
Developed from over 20 years of top level NASCAR use
These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).

Sold per stud.
Wheel nuts sold separately.

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles without Adaptive Cruise Control and with M Sport Package

T#:599469

Part#: LPM-BMC0133-N

Ships on Jul 27, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

Carbonio No-Drill Front License Plate Mount - North America - Most BM...

For vehicles with Adaptive Cruise Control and M Sport Package

T#:599470

Part#: LPM-BMC0136-N

Ships in 2 Business Days

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions

Show More Show Less

Tire Valve For TPMS Systems

T#:641919

Part#: AUL1SENSOR

In Stock

Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

Qty

Sale - Save 29%

$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...

T#:31158762

Part#: WBFI77-E88-501

Ships in 2 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

Provide a polished, high-quality look by covering the open center hole
Are machined from 6061-T5611 aluminum for superior strength and durability
Feature a hand-brushed finish for a seamless OEM appearance
Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
Are sold in sets of four, with center caps not included

Show More Show Less

Extended Spark Plug Socket

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

Autel Universal Rubber TPMS Sensor - Set Of Four

T#:3529121

Part#: AUL1SENSORKT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

7 pc. 3/8" Dr. Spark Plug Socket Set

T#:641915

Part#: 8845D

Ships in 6 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Complete set of spark plug sockets.

AutoLink AL529HD

T#:2914129

Part#: AL529HD

Ships in 6 Business Days

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.

1/2" Drive 24mm Universal Impact Socket

T#:5229449

Part#: 224UMD

Ships on Aug 17, 2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Deep Impact Socket on a swivel.

3/8" Dr. Universal Impact Swivel Joint

T#:2528135

Part#: 3301D

Ships on Aug 17, 2026

5% off MSRP $ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD

Add to Wish List

Qty

5% off MSRP

$ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD

Add to Wish List

Designed for impact use

3/8" Dr. External Star Impact Socket Set

T#:5269512

Part#: 3670SED

Ships on Aug 17, 2026

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

CR-MO alloy steel for long life

14 Pc. Full Polish SAE Angle Head Wrench Set

T#:642035

Part#: 9914A

Ships on Aug 17, 2026

$ 113.91 USD

Add to Wish List

Qty

$ 113.91 USD

Add to Wish List

Radius V-Groove design creates an anti-slip while also preventing round-off.

2 Ton Long Lowrider Service Jack

T#:385986

Part#: 6602LPD

Back Ordered

$ 704.99 USD

Add to Wish List

Qty

$ 704.99 USD

Add to Wish List

Designed to reach far under your vehicle with this long and low chassis

M14x1.5, 19mm Lug Nut - Black

T#:641222

Part#: 40.0001BLK

In Stock

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Replacement M14x1.5 19mm Lug nut

Oil Filter Socket 32mm

T#:5269518

Part#: 367132D

In Stock

6% off MSRP $ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

Qty

6% off MSRP

$ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

Make oil filter housing removal simple

Maxi TPMS Kit With Sensors

T#:5663676

Part#: AULTS508K1

Ships in 6 Business Days

$ 739.99 USD

Add to Wish List

Qty

$ 739.99 USD

Add to Wish List

Pinpoint and replace bad TPMS Sensors

MaxiBAS BT506

T#:2914145

Part#: BT506

Ships in 6 Business Days

$ 402.99 USD

Add to Wish List

Qty

$ 402.99 USD

Add to Wish List

The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b

Show More Show Less

6-Ton Jack Stands - Pair

T#:386187

Part#: 1006D

Ships in 6 Business Days

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

These jack stands have steel base pads for superior stability

3 Ton Aluminum Floor Jack

T#:385984

Part#: 6603ASJD

Ships in 6 Business Days

$ 720.99 USD

Add to Wish List

Qty

$ 720.99 USD

Add to Wish List

Need a light weight(under 60 Lbs) and heavy duty floor jack? This is the one for you

MaxiSys Ultra

T#:2914136

Part#: MSULTRA

Ships in 6 Business Days

$ 12,306.99 USD

Add to Wish List

Qty

$ 12,306.99 USD

Add to Wish List

The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.

Black Forest Industries Extended Wheel Bolt - M14x1.25 - 40mm ...

T#:50899207

Part#: BFI-905-LUG

Ships on Aug 17, 2026

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Specifically designed for use with 10mm to 15mm wheel spacers to maintain proper thread reach.

Ferrea High Performance Valve Kit - B58

T#:29035336

Part#: FER-HPVK-B58-T28

Ships in 3 Business Days

$ 1,059.99 USD

Add to Wish List

Qty

$ 1,059.99 USD

Add to Wish List

The BMW B58 engine can significantly benefit from the high-performance Ferrea valve kit, featuring the renowned Ferrea Competition Plus Valves. Known as the industry’s most dependable extreme-duty valves, these valves are crafted using special aerospace-grade alloys, including the high tensile strength EV8-Z18. To ensure unparalleled quality, an exclusive two-step slow forging process is utilized, promoting optimal grain flow and minimizing material structure damage. Additionally, the valves undergo a rigorous 48-hour heat treatment and stress-relieving process, crucial for maintaining their molecular integrity. The final touch is the application of avionics-quality hard chrome and a specially hardened tip, ensuring exceptional durability and reliability.

Show More Show Less

Active Autowerke AFlow Catted Downpipe - B58N G06/G06/G07

For 2024+ Models -- Please call in with vin prior to purchase

T#:51426482

Part#: 11-062NA

Ships in 10 Business Days

$ 1,519.00 USD

Add to Wish List

Qty

$ 1,519.00 USD

Add to Wish List

Active Autowerke brings motorsport technology to street-legal applications with the B58N Aflow Catted Downpipe. This system features a high-efficiency 400 Cell Per Square Inch (CPSI) Active Aflow catalytic converter that is EPA registered and 49-state legal. By utilizing proprietary precious metal loading, this catalyst reaches operational efficiency within just 9 seconds of startup, ensuring the vehicle remains fully OBD2 compliant. The furnace-brazed stainless steel substrate ensures extreme durability under high-boost conditions. This downpipe provides the flow characteristics of a race pipe while effectively neutralizing harmful emissions and odors, protecting both the environment and the vehicle's passengers. Key Features Active AFlow High-Flow Catalyst: 400 CPSI substrate designed to provide maximum flow while maintaining EPA compliance. Rapid Light-Off Time: Reaches operational efficiency within 9 seconds, ensuring OBD2 readiness monitors remain active. Forced Induction Optimized: Specifically engineered for high-boost applications with zero loss in horsepower. Extreme Heat Resistance: Built to withstand internal exhaust gas temperatures (EGTs) up to 1500°F. Durable Construction: Substrate is furnace-brazed to the mantle, preventing the internal core from shifting or breaking under heavy vibration. Specifications Vehicle Fitment: 2025+ BMW B58N Models (X3-40i, X3-M50i, X5-40i, X7-40i, 540i, 640i, 740i). Cell Density: 400 Cells Per Square Inch (CPSI). Catalyst Material: 304 Stainless Steel Substrate. Compliance: EPA Registered / 49-State Legal (Not CARB registered for California). Warranty: 5-Year/50,000-Mile on shell/ends; 2-Year/25,000-Mile on the catalytic core (Warranty void with "burble" tunes).

Show More Show Less

Maxivideo MV400

T#:2914140

Part#: MV400-55

Ships in 6 Business Days

$ 405.99 USD

Add to Wish List

Qty

$ 405.99 USD

Add to Wish List

This premier Autel MaxiVideo MV400 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight.

Extended Wheel Bolt - M12x1.5 - 35mm

T#:50899204

Part#: BFI-906-LUG

Ships on Aug 17, 2026

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Specifically engineered for vehicles utilizing a wheel stud conversion.

Active Autowerke Performance Catted Downpipes - G05/06 X5 X6, G14/15/...

For vehicles with the N63B engine (2020+) - VIN Required for Purchase

T#:22822601

Part#: 11-041B

Ships in 10 Business Days

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

Unleash the Beast: Active Autowerke Signature GESI High-Flow Downpipes The S63 and N63 twin-turbo V8s are world-class engines, but they’ve got a breathing problem. From the factory, your BMW X5M, X6M, 550i, or 650i is suffocating under massive backpressure caused by restrictive, bulky catalytic converters. If you want real power, you have to let those turbos spin. Active Autowerke’s Signature High-Flow Downpipes are the ultimate "no-compromise" upgrade. Hand-fabricated in Miami, these 3.0" downpipes utilize GESi G-Sport Ultra High Output technology. You get the raw performance of a track setup with the refined, odorless experience of a street car—and most importantly, no Check Engine Light. Why These Downpipes Belong on Your BMW: Turbo performance is all about the pressure differential. By clearing the path behind the turbine wheel, you allow the turbos to work significantly less to produce significantly more. Turbo Response: Experience a massive reduction in lag with quicker spool-up and instant throttle tip-in. Massive Power Ceiling: The 4.5" GESi 400-cell cores are rated for 500hp to 850hp, ensuring they won't become a bottleneck as you climb the ladder of modifications. Clean & Odorless: Forget the "gas station" smell of catless downpipes. These proprietary precious-metal catalysts keep the air clean and your cabin comfortable. Hand-Built Precision These aren't mass-produced units. Each set is TIG-welded 304 stainless steel with cast upper V-band flanges for a factory-perfect seal. Because Active Autowerke builds these in-house, the fitment is surgical—no "massaging" or welding required for a secure bolt-on install. Turner Fitment Note: To guarantee 100% accuracy for your build, please provide your VIN at checkout. Note: These are F-chassis specific; G-body vehicles with the N63B engine require a different configuration. Core Features: No CEL Guarantee: Optimized for catalytic efficiency to keep your dashboard clear. 49-State Legal: EPA Registered and fully OBD2 compliant (Excludes CA). Built for Heat: Rated to withstand up to 1,500°F and reaches operational efficiency in just 9 seconds. Legendary Durability: 304 stainless substrate is furnace-braised to the mantle for maximum vibration resistance. Warranty Protected: Includes a 5-year/50,000-mile structural warranty and a 2-year/25,000-mile catalyst core warranty.* Technical Specs: Material: TIG-Welded 304 Stainless Steel Tubing: Full 3.0" (76mm) Mandrel-Bent Piping Catalyst: GESi Ultra High Output (400 CPI) HP Rating: 500hp - 850hp Lead Time: Custom made-to-order (Approx. 2 weeks) *A Note on Burble Tunes: We love a good exhaust crackle as much as anyone, but "aggressive" burble or pop maps physically destroy catalytic substrates. Use of such tunes will void the warranty on the GESi core.

Show More Show Less

Active Autowerke GESI Catted Downpipe - B58N

For Model Years 2024+

For Model Years 2024+ - Please call in with vin prior to purchase

T#:51320821

Part#: 11-062N

Ships in 10 Business Days

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

For the owner of a late-model BMW who demands a balance of high-end performance and sophisticated daily drivability, Active Autowerke offers the B58N Gen-3 GESI Catted Downpipe. Built with a focus on long-term reliability and environmental standard compliance, this downpipe features an EPA-registered GESI G-Sport catalytic converter. These 400-cell metallic substrates are furnace-braised to the mantle, offering outstanding resistance to thermal shock and vibration. The industrial-grade 304 stainless steel construction ensures the downpipe will withstand years of heat cycles without degrading. This system is a true "plug-and-play" solution that enhances the B58's deep, throaty exhaust note while keeping emissions levels in check and the dashboard clear of errors. Key Features: 49-State Legal: Features an EPA-registered catalyst that is fully OBD2 compliant (excludes vehicles registered in CA). Superior Durability: Constructed entirely from heavy-duty 304 stainless steel with a brushed finish. Proprietary Catalyst Loading: Precious metal technology ensures the reduction of harmful emissions and eliminates raw fuel odors. OEM+ Fitment: Meticulously test-fitted on a dedicated fixture to guarantee a perfect seal with factory turbo and exhaust connections. Comprehensive Kit: Available with an optional turbo flange gasket to ensure a fresh, leak-free installation. Specifications: Type: Signature Series Valved GESI Catted Downpipe. SKU: 11-062N. Catalyst Rating: Rated for high-output applications while maintaining operational efficiency. Hardware: Includes lower mounting brackets and necessary flex section. Vehicle Fitment (US Models Only): * 2025+ BMW X3 40i / X3-M50i (G45) 2025+ BMW X5 40i (G05 LCI) / X7 40i (G07 LCI) 2025+ BMW 540i (G60) / 740i (G70)

Show More Show Less

Active Autowerke S63 N63 A-Flow Catted Downpipes

T#:51110136

Part#: 11-041AB

Ships in 3 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

Active Autowerke’s Aflow Catted Downpipes provide a "no-compromise" solution for the G-body enthusiast who wants high-flow performance without the drawbacks of a track-only "catless" setup. These downpipes feature advanced metallic high-flow catalysts that satisfy onboard diagnostic requirements, meaning you can enjoy increased power without the headache of a Check Engine Light (CEL). By utilizing premium 304 stainless steel and a low-restriction design, these pipes are built to withstand the intense thermal cycles of a twin-turbo V8 while delivering a deep, aggressive exhaust note. This variant is a true bolt-on upgrade that preserves the daily driveability and luxury experience of your BMW while significantly improving its performance ceiling. Key Features: No CEL Operation: Engineered to work with factory emissions monitors for a dashboard-clear experience. Streamlined Exhaust Path: Mandrel-bent 3" piping with minimal bends for smooth, high-velocity exhaust gas flow. Precision Fitment: Developed through extensive R&D to provide a factory-like bolt-on installation. Hand-Made in the USA: Fabricated in-house at Active Autowerke’s Miami facility to ensure surgical quality control. Vibration Resistance: Robust TIG welding and heavy-duty brackets ensure longevity even under aggressive driving conditions. Specifications: Primary Material: Brushed 304 Stainless Steel. Inlet/Outlet: Precision cast V-band inlet and direct-fit outlet. Flow Rating: Significantly higher CFM than restrictive factory ceramic converters. Installation: 100% Bolt-on; no cutting or welding required. Finish: Natural Stainless. Lead Time: Typically custom made-to-order (Approx. 2-week build time).

Show More Show Less

Autel MaxiTPMS TS508WFK-1 TPMS Diagnostic Tool

T#:40782369

Part#: AUL-TS508WFK-1

Ships in 6 Business Days

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

The TS508WFK-1 is a TPMS service tool that features Quick and Advance modes of TPMS service and a TPMS status screen. It can read/activate/relearn all known sensors, has 4 methods of MX-Sensor programming, and performs placard value resets on supported vehicles. This scanner displays on-tool MX-Sensor relearn procedures including OBDII and can do key fob signal tests. The TS508WFK-1 includes an OBDII cable, a 1-year tool warranty, and free lifetime software updates are available with purchase.

Show More Show Less

Ferrea High Performance Valve Kit - B58

T#:29035337

Part#: FER-HPVK-B58-T29

Ships in 3 Business Days

$ 929.00 USD

Add to Wish List

Qty

$ 929.00 USD

Add to Wish List

The BMW B58 engine can significantly benefit from the high-performance Ferrea valve kit, featuring the renowned Ferrea Competition Plus Valves. Known as the industry’s most dependable extreme-duty valves, these valves are crafted using special aerospace-grade alloys, including the high tensile strength EV8-Z18. To ensure unparalleled quality, an exclusive two-step slow forging process is utilized, promoting optimal grain flow and minimizing material structure damage. Additionally, the valves undergo a rigorous 48-hour heat treatment and stress-relieving process, crucial for maintaining their molecular integrity. The final touch is the application of avionics-quality hard chrome and a specially hardened tip, ensuring exceptional durability and reliability.

Show More Show Less

Air Ratchet wrench 3/8 in dirve

T#:2528142

Part#: SX113D

Ships on Aug 17, 2026

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

With great comfort and design the air ratchet wrench is the perfect tool

10 Pc. 3/8" Dr. Metric Crowfoot Wrench Set

T#:2528137

Part#: 9710MD

Ships on Aug 17, 2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Great for lines hoses with nuts and offset nuts.

10 Pc. 3/8" Dr. Metric Torque Adapter Set

T#:5229429

Part#: 910MTAS

Ships on Aug 17, 2026

$ 154.99 USD

Add to Wish List

Qty

$ 154.99 USD

Add to Wish List

Used with a torque wrench to access obstructed fasteners

Pry Bar Set

T#:5269496

Part#: 9704

Ships on Aug 17, 2026

5% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Qty

5% off MSRP

$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Made of heat treated alloy steel

18 Peice Master Brake Caliper Tool Set

T#:5229434

Part#: 3930

Ships on Aug 17, 2026

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

An all inclusive brake piston retractor set

3/4" Dr. 26mm Deep Impact Socket

T#:2706159

Part#: 426MDD

Ships on Aug 17, 2026

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Throw this thin wall impact on for whatever you need!

3/8" Dr. Internal Star Impact Socket Set

T#:5269515

Part#: 3670S

Ships on Aug 17, 2026

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

CR-MO alloy steel for long life

6 Ton Jack Stands - Pair

T#:1793488

Part#: 1006C

Ships on Aug 17, 2026

$ 186.99 USD

Add to Wish List

Qty

$ 186.99 USD

Add to Wish List

Used in pairs for supporting automotive vehicles after lifting

3/4" Dr. 18mm 12-Point Thin Wall Impact Socket

T#:2706156

Part#: 418MZTD

Ships on Aug 17, 2026

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Throw this thin wall impact for whatever you need!

38 pc Mini Ratchet/Bit Set

T#:2528144

Part#: 9726D

Ships on Aug 17, 2026

15% off MSRP $ 68.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.80 USD

Add to Wish List

Qty

15% off MSRP

$ 68.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.80 USD

Add to Wish List

Keep this great tool set near by and ready to use.

1/2" Drive 5" Impact Wobble Extension

T#:2706153

Part#: 2505WD

Ships on Aug 17, 2026

20% off MSRP $ 19.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD

Add to Wish List

Qty

20% off MSRP

$ 19.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD

Add to Wish List

Forged from the finest chrome-molybdenum alloy steel, the best choice for strength

14 Pc. Full Polish Metric Angle Head Wrench Set

T#:2750699

Part#: 9914MA

Ships on Aug 17, 2026

$ 107.39 USD

Add to Wish List

Qty

$ 107.39 USD

Add to Wish List

Fully polished drop forged CR-V alloy steel for maximum strength and service life

Slide Hammer Puller

T#:2498418

Part#: 3911D

Ships on Aug 17, 2026

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

This set covers 8 different functions

7-Piece Oxygen Sensor Socket Set

T#:5282862

Part#: 2850

Ships on Aug 17, 2026

11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Qty

11% off MSRP

$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models

3-Ton Jack Stands - Pair

T#:1046638

Part#: 1003C

Ships on Aug 17, 2026

$ 103.99 USD

Add to Wish List

Qty

$ 103.99 USD

Add to Wish List

Use these large base ratcheting jack stands for a very stable base

1/2" Torque Wrench - 30-250 Ft-lb 48 Tooth Torque Wrench

T#:5229461

Part#: 20250

Ships on Aug 17, 2026

$ 218.99 USD

Add to Wish List

Qty

$ 218.99 USD

Add to Wish List

Accurate to ±3% clockwise and ±6% counterclockwise

3/4 Ton Underhoist Stand

T#:34885399

Part#: 6809A

Ships on Aug 17, 2026

$ 227.99 USD

Add to Wish List

Qty

$ 227.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results