BMW Intake Parts for BMW X Series G05 X5 (2019+)

Dinan High Flow Drop-in Replacement Air Filter - G01/G02/G05/G06/G07/...

For 2019-2023 BMW X5/X6/X7 40i Dinan High Flow Drop-in Replacement Air Filter

Call In Or Chat For Best Price!

T#:18236096

Part#: D401-0043

In Stock

12% off MSRP $ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Qty

12% off MSRP

$ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Reduce your maintenance costs and increase your performance with Dinan's high-flow, washable, drop-in air filter! Using better breathing materials lets your engine make more power while not working as hard, giving you a reliable bump in engine performance! The air filters are a great alternative if a full intake system just is not possible at the moment, but no worries, Dinan has you covered!

Show More Show Less

Genuine BMW MAP Pressure Sensor - BMW N20 N26 N55 S55 N63 S63 ...

T#:539293

Part#: 13628644432

In Stock

5% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 154.99 USD

Add to Wish List

Qty

5% off MSRP

$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 154.99 USD

Add to Wish List

The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in your N55 engine's electronic control system. The manifold absolute pressure sensor provides instantaneous manifold pressure information to the engine's electronic control unit (ECU/DME). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion, efficiency, and ignition timing. Fits BMW Engines including: N20,N26,N55,N63,N63N,S55,S63N

Show More Show Less

Dinan Carbon Fiber Cold Air Intake - G-Chassis 5/6/7/8/X Series B58 ...

Call In Or Chat For Best Price!

T#:21604305

Part#: D760-0068

In Stock

11% off MSRP $ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.99 USD

Add to Wish List

Qty

11% off MSRP

$ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.99 USD

Add to Wish List

Have you been longingly looking at the 2/3/4 series and become jealous of all the aftermarket options available to them? Have you reached out and pled with your favorite manufacturer to produce solutions to bigger-bodied platforms so you too can enjoy added performance and sound? Have you thought all of it was in vain and your requests were ignored? That is not the case. Dinan has heard your inquiries and is pleased to offer an intake for the B58-powered 'G' chassis cars of the 5/6/7/8 and X series. Like its smaller bodied 'G' chassis siblings, the Dinan carbon fiber intake for the bigger B58 vehicles utilizes a semi-open design that incorporates multiple auditory ports on a revised lid, so induction sounds of the turbo are more evident. Beyond the additional sound openings employed in the new design, the immense resonator assembly used in the stock setup to reduce unwanted turbo sounds is also eliminated with the Dinan system. Together, these elements allow the engine to nearly achieve its full sound potential but when paired with the optional turbo inlet (and fit kit) the full intake tract to the turbo is effectively replaced for further audio enhancement. While sound is undoubtedly important for a large swath of consumers, performance enhancements are equally as important to others. Common to all Dinan intake design, improvements upon the factory design by increasing flow via a larger airbox and filter element were made. These standard adjustments improv throttle response (and acceleration) and lessen the strain on the turbocharger for maximum efficiency. While box and filter enlargement and redesign are major factors in ultimately producing a more potent intake, they are not the only variables in creating a more efficient design either. The resonator assembly that limited auditory enjoyment also created a more turbulent airflow path by introducing alternative stunted pathways. The Dinan carbon fiber intake tube eliminates these flow disruptions with a smoother, direct flow path for maximum potential efficiency and an overall 20% greater flow when compared to stock. With these flow and efficiency improvements also comes greater power, particularly off the line, culminating in maximum gains of +7 WHP & +12 lb-ft at 2500 RPM on a completely stock vehicle. Built to elicit a more pronounced sound, provide improved performance with appreciable power gains, and imbue the engine bay with some carbon class -- the Dinan B58 carbon fiber intake for the 'G' chassis 5/6/7/8/X series is a modification must for any enthusiast looking to have it all. NOTE: For B58 'G' chassis 5/6/7/8/X owners that wish to run the Dinan Turbo Inlet (D760-0061) for maximum sound, the appropriate Dinan Intake (D760-0068) as well as the associated Inlet Fit Kit (D763-0100) are REQUIRED. The Dinan Turbo Inlet will NOT mate with the factory intake system. Features: More Power: Maximum gains of +7 WHP & +12 lb-ft @ 2500 RPM without additional modifications A pronounced sporty sound courtesy of a semi-open design Improved throttle/turbo response compared to stock resulting in quicker acceleration Flows 20% more than stock (stock: 416 CFM, Dinan: 506 CFM in 15-inches of H2O) 66% larger volume air box (stock: 150in3, Dinan: 250in3) for increased breathability 44% increase in filter area (stock: 56.75.3in², Dinan: 82in²) for optimum flow Optimized carbon fiber intake tube with less restriction Washable and reusable high flow pleated cotton gauze filter Quick and easy installation X3/X4 M40i FITMENT: D760-0068 is ONLY compatible with the 2018-2019 model years for the X3 & X4 M40i. In 2020 the air box changed to a different configuration which affects fitment of the Dinan intake. INLET NOTICE: For B58 'G' chassis 5/6/7/8/X owners that wish to run the Dinan Turbo Inlet (D760-0061) for maximum sound, the appropriate Dinan Intake (D760-0068) as well as the associated Inlet Fit Kit (D763-0100) are REQUIRED. The Dinan Turbo Inlet will NOT mate with the factory intake system.

Show More Show Less

Intake Resonator Delete Pipe - G01/G02, G05/G06/G07, G30/G32 B58 ...

T#:53326245

Part#: 058917LA01

In Stock

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

From the factory, B58-equipped BMWs are designed to be refined and quiet. To achieve this, BMW equipped the intake tract with a bulky plastic resonator designed to cancel out the natural induction sounds of the engine. While great for a silent commute, it robs the enthusiast of the satisfying "whoosh" noise and turbo spool that make the B58 one of the most exciting engines on the market today.

Our Intake Resonator Delete Pipe is the simplest, most cost-effective way to bring that personality back to your BMW without shelling out hundreds for a full intake system. By deleting the OEM intake resonator assembly, you'll experience a drastic increase in induction noise and blow-off sounds. This hose also removes the internal chambers that create turbulence in the factory pipe, ensuring smooth, consistent airflow to the turbocharger. In short, this fully-reversible delete pipe is a must-have upgrade for owners who wish to keep their factory airbox while dramatically increasing induction noise.

Features:

Increases audible induction noise and turbocharger "blow-off" sounds
Removes the internal chambers that cause turbulence in the factory pipe, ensuring smooth, consistent airflow to the turbocharger
Precision-engineered to look like it belonged there from the factory
Perfect for those who want better sound and flow while keeping the superior filtration and heat-shielding of the OE BMW airbox
Design:

Durable four-ply fiber-reinforced silicone construction matches the exact dimensions of the factory air intake elbow (13717643302), ensuring a perfect fit
T304 stainless steel German-style worm gear hose clamps ensure a consistent seal and optimal corrosion resistance
Fully-reversible - no permanent modifications necessary!
Product Development:

Our B58 Intake Resonator Delete Pipe was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Show More Show Less

Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW F22/23 F30/32/33/36 B...

For 2019-2023 model years

Call In Or Chat For Best Price!

T#:8076778

Part#: D760-0061

In Stock

11% off MSRP $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Qty

11% off MSRP

$ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. More Flow: Up to 24% greater than stock. 24% increase in overall volume over OEM inlet. Average of 10.8% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Genuine BMW Crank Case Ventilation Valve - N63 4.4L

T#:216971

Part#: 11158647299

In Stock

10% off MSRP $ 208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.99 USD

Limited Qty Sale

Add to Wish List

Qty

10% off MSRP

$ 208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.99 USD

Limited Qty Sale

Add to Wish List

Genuine Bmw Connecting Line - 11158647299

Genuine BMW T-Map Sensor - 13628637900

T#:222870

Part#: 13628637900

Ships in 1 day

8% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD

Add to Wish List

Qty

8% off MSRP

$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD

Add to Wish List

Rough idling and slow acceleration are 2 common signs of a failing Tmap sensor. Take the time to replace this to get your car running at 100% again.

CSF Racing Performance "Super Manifold" - BMW G20/22 G30 G01/02, Toyo...

2X Entries For Our G87 M2 Sweepstakes! CARB certified for sale in all 50 states

T#:2498426

Part#: 8200

EO#: D-770

Ships in 3 Business Days

$ 4,299.00 USD

Add to Wish List

Qty

$ 4,299.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle.

Show More Show Less

CSF B58 Thermal Rejection Competition Spacer - BMW G20/22 G30 G01/02,...

2X Entries For Our G87 M2 Sweepstakes! Designed to be used with CSF's B58 Super Manifold (CSF #8200 - T#2498426 or #8200B - T#9868813)

T#:8154081

Part#: 8200S

Ships in 1 Business Day

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

CSF is continually updating and adding new products In an effort to help customers achieve the highest level of competition in motorsports. CSF is pleased to release the latest B58 performance product. The CSF B58 Thermal Rejection Competition Spacer (CSF #8200S). The CSF B58 Thermal Rejection Competition Spacer is the next level upgrade for the B58 Super Manifold (CSF #8200 - ES4389640). Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Spacer Height = 6.5mm Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Can withstand temps up to 1100°F and is as strong as Aluminum Self-Sealing and do NOT require gaskets, silicon products, or sealing agents of any kind. Tested on @peppa_aka_skull’s (1000HP) A90 Supra by Visconti Tuning Includes installation hardware and instructions Highly recommended for Drag/Roll-Racing Applications where vehicles typically sit in staging lanes in-between racing Limited Lifetime Warranty Will NOT work with the OEM Manifold The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The B58 Super Manifold is made from Billet Aluminum and 100% Tig Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. The CSF Thermal Rejection Competition Spacer was designed for vehicles competing in motorsports who demand the absolute best cooling in order to gain a competitive edge. With that being said, there are significant advantages to adding this spacer upgrade to any vehicle with the CSF B58 Super Manifold installed.

Show More Show Less

Genuine BMW Manifold Absolute Pressure (MAP) Sensor - F8X F9X F85/86 ...

T#:599874

Part#: 13628644433

Ships in 1 day

Sale - Save 6% $ 147.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 139.85 USD

Add to Wish List

Qty

Sale - Save 6%

$ 147.99

This product was last offered at the strikethrough price on
06-25-2026

$ 139.85 USD

Add to Wish List

The MAP sensor, or manifold absolute pressure sensor, works with the engine computer to set the fuel curve and give readings to the engine computer. If yours is faulty, it may cause improper running, rich or lean fuel curves, or other general performance issues. Replace yours with this unit to keep your engine running at full potential. For N54 applications, you will need adapter harness T#583821- This TMAP sensor is typically used in high-boost applications for the N54

Show More Show Less

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum Finish - Ge...

2X Entries For Our G87 M2 Sweepstakes!

T#:25109031

Part#: 8400NEO

Ships in 3 Business Days

$ 7,399.00 USD

Add to Wish List

Qty

$ 7,399.00 USD

Add to Wish List

When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)

Show More Show Less

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum Finish - Ge...

2X Entries For Our G87 M2 Sweepstakes!

T#:23648670

Part#: 8400

EO#: D-770

Ships in 3 Business Days

$ 5,599.00 USD

Add to Wish List

Qty

$ 5,599.00 USD

Add to Wish List

When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)

Show More Show Less

CSF Racing "Race X" Intake Manifold - Thermal Black Finish - Gen 2 B5...

2X Entries For Our G87 M2 Sweepstakes!

T#:23648671

Part#: 8400B

Ships in 3 Business Days

$ 5,995.00 USD

Add to Wish List

Qty

$ 5,995.00 USD

Add to Wish List

When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)

Show More Show Less

CSF Adaptor Plugs for B58/S58 Manifolds

T#:56001930

Part#: CSF8403

Ships in 3 Business Days

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

Add methanol, water, or nitrous injection to your build with ease. This premium 6-plug kit features an internal 5/16-24 thread, turning your CSF B58 or S58 manifold runners into custom injection ports.

Show More Show Less

Performance Charge-Air Cooler "Super Manifold" - Thermal Black Finish...

2X Entries For Our G87 M2 Sweepstakes!

T#:9868813

Part#: 8200B

Ships in 3 Business Days

$ 4,599.00 USD

Add to Wish List

Qty

$ 4,599.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle. CSF's Testing Results: Faster recovery of intake air temperatures ~30°F reduction of intake air temperatures (IAT’s) compared to OEM Less pressure drop compared to OEM core Puts less stress on the turbo system, allowing more boost to be made at higher targets Avoided going into limp mode after prolonged demanding conditions, simulating motorsports use On a stage 2 car with bolt-on upgrades, making ~400whp, comparing dyno run 19 between CSF and OEM, an increase of ~26whp and 11wtq were achieved The performance increase and delta between CSF and OEM will be bigger as power is increased in the vehicle Features & Specifications: High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core - Double the Capacity of the OEM Core (12 Rows of Water Cooling vs. OEM 6 Rows) lower pressure drop across the system Easy Access to Oil Filter Housing Integrated Sensor Pad - Three 1/8" NPT Ports Included Optional Fuel Rail - Adds Port Injection Capabilities! Individual Port Injection Bungs on Each Cylinder Runner - Arrives Pre-Plugged Integrated Nitrous/Meth Ports - 1/8" NPT ports on each cylinder runner Allows for Even Spray Distribution and Control for Maximum Performance and Engine Protection Individual 1/8" NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Air-Bleeding of the System Plug-and-Play design, Requiring No Modifications to Install Includes Hardware and Installation Kit with Picture Diagrams Containing 28 Different Parts for Easy Installation Can be Used With OEM or Aftermarket Engine Covers (with OEM Connections) Comes Finished in Thermal Black Heat Dispersion Coating Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Looking to get the most out of this intake? We suggest pairing this with CSF's B58 Thermal Rejection Competition Spacer! (See T#8154081)

Show More Show Less

Performance Charge-Air Cooler "Super Manifold" - DLC Neo Chrome Finis...

2X Entries For Our G87 M2 Sweepstakes! This is a special order finish. Lead time is 5-6 weeks.

T#:25042501

Part#: 8200NEO

Ships in 3 Business Days

$ 6,099.00 USD

Add to Wish List

Qty

$ 6,099.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle.

Show More Show Less

Genuine BMW Charge Air Induction Tract - 13718601684

T#:222876

Part#: 13718601684

Ships in 1 day

6% off MSRP $ 561.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 527.99 USD

Add to Wish List

Qty

6% off MSRP

$ 561.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 527.99 USD

Add to Wish List

Genuine BMW air induction tract. Runs from the turbo to the throttle body

Genuine BMW Throttle - 13547619008

T#:194738

Part#: 13547619008

Ships in 1 day

6% off MSRP $ 793.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 745.99 USD

Add to Wish List

Qty

6% off MSRP

$ 793.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 745.99 USD

Add to Wish List

Genuine Bmw Throttle

Replacement Air Filter For Dinan Cold Air Intake - F95/96 X5M X6M ...

Replacement filter for the Dinan High Flow Carbon Fiber Intake (D760-0068). WILL NOT FI...

Call In Or Chat For Best Price!

T#:4070474

Part#: D401-0030

Special Order: No Guaranteed ETA

12% off MSRP $ 119.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 105.99 USD

Add to Wish List

Qty

12% off MSRP

$ 119.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 105.99 USD

Add to Wish List

Replacement air filter for the Dinan High Flow Carbon Fiber Intake (D760-0056). Features: Deep pleats in multi-layered cotton for increased flow and superior filtration. Steel wire mesh providing strength and dent resistance. Custom molded ends allowing for optimum filter surface area within the Dinan air box.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW X Series G05 X5 (2019+)

Sub-Categories

Dinan High Flow Drop-in Replacement Air Filter - G01/G02/G05/G06/G07/...

Genuine BMW MAP Pressure Sensor - BMW N20 N26 N55 S55 N63 S63 ...

Dinan Carbon Fiber Cold Air Intake - G-Chassis 5/6/7/8/X Series B58 ...

Intake Resonator Delete Pipe - G01/G02, G05/G06/G07, G30/G32 B58 ...

Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW F22/23 F30/32/33/36 B...

Genuine BMW Crank Case Ventilation Valve - N63 4.4L

Genuine BMW T-Map Sensor - 13628637900

CSF Racing Performance "Super Manifold" - BMW G20/22 G30 G01/02, Toyo...

CSF B58 Thermal Rejection Competition Spacer - BMW G20/22 G30 G01/02,...

Genuine BMW Manifold Absolute Pressure (MAP) Sensor - F8X F9X F85/86 ...

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum Finish - Ge...

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum Finish - Ge...

CSF Racing "Race X" Intake Manifold - Thermal Black Finish - Gen 2 B5...

CSF Adaptor Plugs for B58/S58 Manifolds

Performance Charge-Air Cooler "Super Manifold" - Thermal Black Finish...

Performance Charge-Air Cooler "Super Manifold" - DLC Neo Chrome Finis...

Genuine BMW Charge Air Induction Tract - 13718601684

Genuine BMW Throttle - 13547619008

Replacement Air Filter For Dinan Cold Air Intake - F95/96 X5M X6M ...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results