BMW X Series G06 X6 (2020+)

BMS Pedal Tuner - N52, N54, N55

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

T#:9803960

Part#: BMWJACKPADRED4

Ships in 3 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

Burger Motorsports JB4 Tuner - N63R - BMW G-Chassis

For G-Chassis Vehicles Only; Not for sale or use in California

T#:600240

Part#: JB4-N63R-G

In Stock

$ 779.00 USD

Add to Wish List

Qty

$ 779.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 4 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Active Autowerke S63 N63 A-Flow Catted Downpipes

T#:51110136

Part#: 11-041AB

Ships in 4 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

Active Autowerke’s Aflow Catted Downpipes provide a "no-compromise" solution for the G-body enthusiast who wants high-flow performance without the drawbacks of a track-only "catless" setup. These downpipes feature advanced metallic high-flow catalysts that satisfy onboard diagnostic requirements, meaning you can enjoy increased power without the headache of a Check Engine Light (CEL). By utilizing premium 304 stainless steel and a low-restriction design, these pipes are built to withstand the intense thermal cycles of a twin-turbo V8 while delivering a deep, aggressive exhaust note. This variant is a true bolt-on upgrade that preserves the daily driveability and luxury experience of your BMW while significantly improving its performance ceiling. Key Features: No CEL Operation: Engineered to work with factory emissions monitors for a dashboard-clear experience. Streamlined Exhaust Path: Mandrel-bent 3" piping with minimal bends for smooth, high-velocity exhaust gas flow. Precision Fitment: Developed through extensive R&D to provide a factory-like bolt-on installation. Hand-Made in the USA: Fabricated in-house at Active Autowerke’s Miami facility to ensure surgical quality control. Vibration Resistance: Robust TIG welding and heavy-duty brackets ensure longevity even under aggressive driving conditions. Specifications: Primary Material: Brushed 304 Stainless Steel. Inlet/Outlet: Precision cast V-band inlet and direct-fit outlet. Flow Rating: Significantly higher CFM than restrictive factory ceramic converters. Installation: 100% Bolt-on; no cutting or welding required. Finish: Natural Stainless. Lead Time: Typically custom made-to-order (Approx. 2-week build time).

Show More Show Less

Active Autowerke AFlow Catted Downpipe - B58N G06/G06/G07

For 2024+ Models -- Please call in with vin prior to purchase

T#:51426482

Part#: 11-062NA

Ships on Aug 5, 2026

$ 1,519.00 USD

Add to Wish List

Qty

$ 1,519.00 USD

Add to Wish List

Active Autowerke brings motorsport technology to street-legal applications with the B58N Aflow Catted Downpipe. This system features a high-efficiency 400 Cell Per Square Inch (CPSI) Active Aflow catalytic converter that is EPA registered and 49-state legal. By utilizing proprietary precious metal loading, this catalyst reaches operational efficiency within just 9 seconds of startup, ensuring the vehicle remains fully OBD2 compliant. The furnace-brazed stainless steel substrate ensures extreme durability under high-boost conditions. This downpipe provides the flow characteristics of a race pipe while effectively neutralizing harmful emissions and odors, protecting both the environment and the vehicle's passengers. Key Features Active AFlow High-Flow Catalyst: 400 CPSI substrate designed to provide maximum flow while maintaining EPA compliance. Rapid Light-Off Time: Reaches operational efficiency within 9 seconds, ensuring OBD2 readiness monitors remain active. Forced Induction Optimized: Specifically engineered for high-boost applications with zero loss in horsepower. Extreme Heat Resistance: Built to withstand internal exhaust gas temperatures (EGTs) up to 1500°F. Durable Construction: Substrate is furnace-brazed to the mantle, preventing the internal core from shifting or breaking under heavy vibration. Specifications Vehicle Fitment: 2025+ BMW B58N Models (X3-40i, X3-M50i, X5-40i, X7-40i, 540i, 640i, 740i). Cell Density: 400 Cells Per Square Inch (CPSI). Catalyst Material: 304 Stainless Steel Substrate. Compliance: EPA Registered / 49-State Legal (Not CARB registered for California). Warranty: 5-Year/50,000-Mile on shell/ends; 2-Year/25,000-Mile on the catalytic core (Warranty void with "burble" tunes).

Show More Show Less

Active Autowerke Performance Catted Downpipes - G05/06 X5 X6, G14/15/...

For vehicles with the N63B engine (2020+) - VIN Required for Purchase

T#:22822601

Part#: 11-041B

Ships on Aug 5, 2026

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

Unleash the Beast: Active Autowerke Signature GESI High-Flow Downpipes The S63 and N63 twin-turbo V8s are world-class engines, but they’ve got a breathing problem. From the factory, your BMW X5M, X6M, 550i, or 650i is suffocating under massive backpressure caused by restrictive, bulky catalytic converters. If you want real power, you have to let those turbos spin. Active Autowerke’s Signature High-Flow Downpipes are the ultimate "no-compromise" upgrade. Hand-fabricated in Miami, these 3.0" downpipes utilize GESi G-Sport Ultra High Output technology. You get the raw performance of a track setup with the refined, odorless experience of a street car—and most importantly, no Check Engine Light. Why These Downpipes Belong on Your BMW: Turbo performance is all about the pressure differential. By clearing the path behind the turbine wheel, you allow the turbos to work significantly less to produce significantly more. Turbo Response: Experience a massive reduction in lag with quicker spool-up and instant throttle tip-in. Massive Power Ceiling: The 4.5" GESi 400-cell cores are rated for 500hp to 850hp, ensuring they won't become a bottleneck as you climb the ladder of modifications. Clean & Odorless: Forget the "gas station" smell of catless downpipes. These proprietary precious-metal catalysts keep the air clean and your cabin comfortable. Hand-Built Precision These aren't mass-produced units. Each set is TIG-welded 304 stainless steel with cast upper V-band flanges for a factory-perfect seal. Because Active Autowerke builds these in-house, the fitment is surgical—no "massaging" or welding required for a secure bolt-on install. Turner Fitment Note: To guarantee 100% accuracy for your build, please provide your VIN at checkout. Note: These are F-chassis specific; G-body vehicles with the N63B engine require a different configuration. Core Features: No CEL Guarantee: Optimized for catalytic efficiency to keep your dashboard clear. 49-State Legal: EPA Registered and fully OBD2 compliant (Excludes CA). Built for Heat: Rated to withstand up to 1,500°F and reaches operational efficiency in just 9 seconds. Legendary Durability: 304 stainless substrate is furnace-braised to the mantle for maximum vibration resistance. Warranty Protected: Includes a 5-year/50,000-mile structural warranty and a 2-year/25,000-mile catalyst core warranty.* Technical Specs: Material: TIG-Welded 304 Stainless Steel Tubing: Full 3.0" (76mm) Mandrel-Bent Piping Catalyst: GESi Ultra High Output (400 CPI) HP Rating: 500hp - 850hp Lead Time: Custom made-to-order (Approx. 2 weeks) *A Note on Burble Tunes: We love a good exhaust crackle as much as anyone, but "aggressive" burble or pop maps physically destroy catalytic substrates. Use of such tunes will void the warranty on the GESi core.

Show More Show Less

Active Autowerke GESI Catted Downpipe - B58N

For Model Years 2024+

For Model Years 2024+ - Please call in with vin prior to purchase

T#:51320821

Part#: 11-062N

Ships on Aug 5, 2026

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

For the owner of a late-model BMW who demands a balance of high-end performance and sophisticated daily drivability, Active Autowerke offers the B58N Gen-3 GESI Catted Downpipe. Built with a focus on long-term reliability and environmental standard compliance, this downpipe features an EPA-registered GESI G-Sport catalytic converter. These 400-cell metallic substrates are furnace-braised to the mantle, offering outstanding resistance to thermal shock and vibration. The industrial-grade 304 stainless steel construction ensures the downpipe will withstand years of heat cycles without degrading. This system is a true "plug-and-play" solution that enhances the B58's deep, throaty exhaust note while keeping emissions levels in check and the dashboard clear of errors. Key Features: 49-State Legal: Features an EPA-registered catalyst that is fully OBD2 compliant (excludes vehicles registered in CA). Superior Durability: Constructed entirely from heavy-duty 304 stainless steel with a brushed finish. Proprietary Catalyst Loading: Precious metal technology ensures the reduction of harmful emissions and eliminates raw fuel odors. OEM+ Fitment: Meticulously test-fitted on a dedicated fixture to guarantee a perfect seal with factory turbo and exhaust connections. Comprehensive Kit: Available with an optional turbo flange gasket to ensure a fresh, leak-free installation. Specifications: Type: Signature Series Valved GESI Catted Downpipe. SKU: 11-062N. Catalyst Rating: Rated for high-output applications while maintaining operational efficiency. Hardware: Includes lower mounting brackets and necessary flex section. Vehicle Fitment (US Models Only): * 2025+ BMW X3 40i / X3-M50i (G45) 2025+ BMW X5 40i (G05 LCI) / X7 40i (G07 LCI) 2025+ BMW 540i (G60) / 740i (G70)

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

BMS Pedal Tuner - N52, N54, N55

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

Universal BMW Jack Pad Red - Set Of 4

Burger Motorsports JB4 Tuner - N63R - BMW G-Chassis

Active Autowerke Signature Trunk Emblem

Active Autowerke S63 N63 A-Flow Catted Downpipes

Active Autowerke AFlow Catted Downpipe - B58N G06/G06/G07

Active Autowerke Performance Catted Downpipes - G05/06 X5 X6, G14/15/...

Active Autowerke GESI Catted Downpipe - B58N

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results