BMW Cooling System Parts & Accessories for BMW 7 Series G11 (2016+)

Gen1 B58 Water Pump Replacement Kit - BMW F22/23 F3X B58 3.0L ...

For early vehicles with the Gen1 B58 (B58A) - Not compatible with the B58TU (B58D) engine

T#:27871814

Part#: 11518632585TKT

Ships on Aug 31, 2026

Sale - Save 5% $ 156.99

This product was last offered at the strikethrough price on
01-31-2026

$ 149.40 USD

Add to Wish List

Qty

Sale - Save 5%

$ 156.99

This product was last offered at the strikethrough price on
01-31-2026

$ 149.40 USD

Add to Wish List

If your water pump is leaking coolant, there is a good chance one of the seals has failed. This is especially common when your coolant level gets too low and your BMW's water pump runs without coolant. The water pump shaft seal can fail as it gets too hot and you will begin to notice coolant dripping from the weep hole found at the bottom of your pump. We recommend replacing the whole pump to ensure your BMW stays cool for many more years! This kit includes the basic parts necessary to replace your water pump: GEBA Mechanical Pump with an upgraded metal impeller Elring Water Pump Gasket Genuine BMW Water Pump Bolts (x6) Don't forget to pick up a gallon of BMW coolant as well to top your system back off once you have completed your pump installation! Servicing your accessory belt and tensioner is also great to do at this time as the belt must be removed before replacing your pump.

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Blue - Most BMWs 2006+ (E...

T#:7530036

Part#: COOLANTCAPBLUE

In Stock

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Red - Most BMWs 2006+ (E/...

T#:7530034

Part#: COOLANTCAPRED

Ships in 1 Business Day

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Clear - Most BMWs 2006+ (...

This coolant cap retains ALL of the factory provisions by simply allowing you to snap t...

T#:7530035

Part#: COOLANTCAPRAW

Ships in 3 Business Days

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

VTT Billet/Silicone Cylinder Head Cooling Hose - B58TU

For vehicles with a production date from 01/18

T#:29334026

Part#: VTT-B58TU-UCH

Ships in 10 Business Days

Starting at $ 209.99 USD

Add to Wish List

Starting at $ 209.99 USD

Add to Wish List

Positioned directly in the charge pipe's path, the stock B58TU upper cylinder head cooling hose, primarily made of plastic, is prone to damage. A dislodged charge pipe can easily take out this cooling hose, leading to severe engine damage through rapid coolant loss and overheating.

To address this vulnerability, VTT has engineered a robust solution. By replacing the OEM rubber hose with a durable 7-ply silicone variant, they offer superior resilience and longevity. Furthermore, they've upgraded the factory plastic flanges to 6061-T6 billet aluminum with black anodizing, enhancing corrosion resistance.

This upgraded hose is the ultimate solution, providing protection against dislodged charge pipes and the heat generated from spirited driving or track use.

Key Features:

Direct factory replacement for easy installation 6061-T6 billet aluminum with black anodizing for improved corrosion resistance Durable 7-ply silicone available in three colors Upgrade your BMW B58TU engine with this enhanced cooling hose from Vargas Turbo Technologies for superior performance and reliability.

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Black - Most BMWs 2006+ (...

T#:7530033

Part#: COOLANTCAPBLK

Back Ordered

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Febi Coolant Expansion Tank Cap - E90 E92 F30 F32 F10 F12 F06 ...

We Price Match - Give Us A Call or Chat!

T#:340719

Part#: 17117639020

In Stock

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

This radiator expansion tank cap is used most BMW's from 2006+. It is a common failure item. When this item fails, it cannot hold pressure which results in your BMW overheating. If you are overhauling your coolant system, now is the time to consider preventative replacing this cap. It is also referred to as the coolant reservoir cap.

Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

This item fits the following BMWs:
2008-2013 E82 BMW 128i 135i 135is 1M Coupe
2014+ F22 BMW 228i 228i xDrive M235i M235i xDrive
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible 435i xDrive Convertible- Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2014+ F07 BMW 535i GT, 535i xDrive GT
2012+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive
2012+ F12 BMW 640i 640i xDrive 650i 650i xDrive
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe
2009+ F01 BMW 740i 740li 740li xDrive 740ld xDrive 750i 750li 750i xDrive 750li xDrive 760li
2013+ E84 BMW X1 sDrive28i X1 xDrive28i X1 xDrive35i
2011+ F25 BMW X3 xDrive28i X3 xDrive28d X3 xDrive35i
2015+ F26 BMW X4 xDrive28i X4 xDrive35i
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5 xDrive50i X5M
2014+ F15 BMW X5 sDrive35i X5 xDrive35d X5 xDrive35i X5 xDrive50i
2008-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

Show More Show Less

Vargas Billet HMM Delete Kit - BMW B58TU

Fits all B58 TU / Gen 2 B58 engines

T#:51672725

Part#: VTT-B58-COOLING-

Ships in 10 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

The VTT Billet B58 HMM Delete is for enthusiasts who want to remove the bulky, plastic factory coolant unit in favor of a robust, motorsport-oriented setup.

Vargas Remote Oil Cooler Adapter - BMW B58, Toyota A90/A91

T#:51778122

Part#: VTT-B58-OIL-COOL

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

The VTT Billet B58 Remote Oil Cooler Adapter is an ideal upgrade for B58-powered platforms.

Vargas Billet Coolant Block-Off - BMW B58 Engine

T#:52094566

Part#: VTTFAB040BLKB58

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Engineered for precision and durability, the VTT-FAB-040 B58 Block-Off Flange is the definitive solution for managing oil and coolant paths during fabrication.