Square Performance Wheel Sets

• Enhanced vehicle performance
• Increased strength and stiffness
• Improved impact resistance
• Cost-effective alternative to forged wheels

• Size: 19"x8.5" - Set of Four
• Offset: 32mm
• Center Bore: 82mm
• Bolt Pattern: 5x112
• Finish: Brilliant Silver with Polished Rim Protector
• Includes Center Caps and 66.6mm BBS "PFS" rings
• Requires Conical Seat Wheel Bolts
• Weight: 24lbs each

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

 Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Brilliant Silver painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

• 19x8.5 ET32 - qty 4
• Brilliant Silver
• Center Bore: PFS
• Bolt Pattern: 5x120

• Enhanced vehicle performance
• Increased strength and stiffness
• Improved impact resistance
• Cost-effective alternative to forged wheels

• Size: 18"x8.5" - Set of Four
• Offset: 38mm
• Center Bore: 82mm
• Bolt Pattern: 5x112
• Finish: Brilliant Silver with Polished Rim Protector
• Includes Center Caps and 66.6mm BBS "PFS" rings
• Requires Conical Seat Wheel Bolts
• Weight: 23.5lbs each

• Improved vehicle performance
• Enhanced strength and stiffness
• Increased impact resistance
• Cost-effective compared to forged wheels

• Size: 18"x8.5" - Set of Four
• Offset: 38mm
• Center Bore: 82mm
• Bolt Pattern: 5x112
• Finish: Satin Titanium with Polished Rim Protector
• Includes Center Caps and 66.6mm BBS "PFS" rings
• Requires Conical Seat Wheel Bolts
• Weight: 23.5lbs each

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Black with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

• 19x8.5 ET32 - qty 4
• Diamond Black with a diamond cut lip
• Center Bore: PFS
• Bolt Pattern: 5x120