Find Parts That Fit Your Vehicle

FTP Motorsport Charge Pipes & Turbo Inlets

The factory BMW charge pipes are prone to cracking, as they are made from brittle plastic. Here at Turner, we sell several brands of replacement charge pipes that are typically made from cast aluminum. We recommend upgrading to hard charge pipes even on stock forced induction vehicles to avoid cracking - we've seen cracking occur on high mileage cars running stock power just as frequently as we do with high horsepower builds.
Sort By:

FTP Motorsport - Corporate Logo
T#:14916012
Part#: 003174LB01
In Stock
$ 399.99 USD
Free Shipping on orders $49 and up

If you plan on turning up the boost on your car these charge pipes are a must-have! Full aluminum charge pipes ready to install in factory location.

S58 equipped cars are an absolute weapon on the road and track. Although BMW has upgraded their charge pipe design they are no match for the upgraded FTP charge pipes.

In years past the BMW charge pipes were made from flimsy plastic that ended up failing rather quickly and/or blowing apart due to the constant heat cycling in the engine. For the S58 BMW stepped it up a notch with a combination of rubber piping with aluminum flanges. The issue with the rubber hoses are that they can expand and contract which allow for fluctuating pressure and over time, failure. When upgrading to the full aluminum charge pipes you get a constant hold of pressure to keep your turbos, engines, and computer happy with consistent pressure.

The FTP charge pipes come with all the necessary o-rings, clamps, flanges, and oem mounting for a direct and simple installation.

Features and benefits:

Upgraded aluminum that wont expand under pressure
Smooth flow path
Durable black powder coat
OE mounting for DIRECT FITMENT
Clips, flanges, seals included for installation

Show More Show Less
FTP Motorsport - Corporate Logo
T#:46444146
Part#: SG71379-L
Special Order: No Guaranteed ETA
$ 360.00 USD
Free Shipping on orders $49 and up
$ 360.00 USD
Free Shipping on orders $49 and up
FTP Motorsport has engineered this turbo inlet to eliminate the common bottlenecks of the factory design while maintaining direct-fit compatibility. With a focus on flow efficiency, pressure integrity, and thermal stability, this inlet ensures your S58 gets the air it deserves. Whether you're chasing lap times or enhancing your daily driving experience, this upgrade delivers the performance, reliability, and craftsmanship you expect from FTP Motorsport.
Show More Show Less
FTP Motorsport - Corporate Logo
T#:586830
Part#: SG71312FG-9
Special Order: No Guaranteed ETA
$ 24.95 USD
Free Shipping on orders $49 and up
Replacement Intake pipe C-clip and o-ring.

FTP Motorsport - Corporate Logo
T#:37217360
Part#: SG71479
Special Order: No Guaranteed ETA
$ 380.00 USD
Free Shipping on orders $49 and up
BMW plastic intake and turbo inlet pipes are known to crack or split, leading to CELs and rough running issues. These aluminum turbo inlet and intake pipes from FTP Motorsport are designed to directly replace the stock plastic pipes, giving you peace of mind and increased intake airflow. Constructed using 6061 aluminum, these pipes are lightweight while being significantly stronger and more durable than the OE plastic turbo inlet pipes.
Show More Show Less

FTP Motorsport - Corporate Logo
T#:37217361
Part#: SG71444-71457
Special Order: No Guaranteed ETA
7% off MSRP $ 450.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 420.00 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 450.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 420.00 USD
Free Shipping on orders $49 and up
The factory turbo inlet pipe and charge pipe are made from plastic, which has proven to become an issue over time. Often the plastic pipes become brittle and are prone to cracking or splitting. These FTP Motorsport turbo inlet and charge pipes are a direct replacement and are constructed from aluminum for greater durability and reliability. These pipes also offer increased flow compaired to the stock pipes, resulting in smoother air delivery, increased turbo response, and greater power.
Show More Show Less
FTP Motorsport - Corporate Logo
T#:46203549
Part#: SG71484
Special Order: No Guaranteed ETA
$ 470.00 USD
Free Shipping on orders $49 and up
BMW's S58 engine relies on a network of five charge pipes to deliver pressurized air to the intake manifold. While most of these rubber lines hold up well, the factory plastic 2-to-1 charge pipe is a known weak point, often prone to cracking or splitting under pressure, leading to unwanted boost leaks and performance loss. Over time, the OEM plastic pipe becomes brittle due to constant exposure to high temperatures and elevated boost levels. This issue is especially common for vehicles running upgraded turbos or increased boost pressure. FTP Motorsport has developed a high-strength aluminum replacement designed to eliminate this failure point entirely. Built to handle extreme temperatures and high-boost applications, this upgrade delivers both reliability and performance. Unlike the factory’s oval-shaped pipe, the FTP version features round tubing, minimizing turbulence and promoting smoother airflow. The result? Sharper throttle response, improved efficiency, and increased power output.
Show More Show Less

FTP Motorsport - Corporate Logo
T#:26404837
Part#: SG71414SPK
Special Order: No Guaranteed ETA
$ 250.00 USD
Free Shipping on orders $49 and up
FTP Motorsport - Corporate Logo
T#:36269410
Part#: SG71350-Y
Special Order: No Guaranteed ETA
$ 570.00 USD
Free Shipping on orders $49 and up

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow)

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow) is the ultimate performance upgrade for BMW enthusiasts looking to enhance their engine's reliability and style. Available through Turner Motorsport, this high-quality kit is specifically designed for BMW F80 M3 and F82 M4 models equipped with the powerful S55 engine.

This upgrade replaces the fragile OEM charge pipe and boost pipe with a durable, crack-resistant solution that ensures optimal airflow and performance under high-boost conditions. The eye-catching yellow finish not only adds a custom look to your engine bay but also reflects the premium craftsmanship FTP Motorsports is known for.

Key Features and Benefits

  • Precision-engineered for BMW F80 M3 and F82 M4 models with S55 engines
  • Constructed from durable materials to withstand extreme boost pressures and temperatures
  • Optimized for smooth, unrestricted airflow to enhance turbo response and performance
  • Vibrant yellow finish for a stylish and unique engine bay upgrade
  • Eliminates cracking and failure common in OEM components
  • Direct-fit design for easy installation without modifications
  • Perfect for track and street performance applications

Upgrade your BMW F80 M3 or F82 M4 with the FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow), available now at Turner Motorsport for improved performance, reliability, and style.

Show More Show Less

FTP Motorsport - Corporate Logo
T#:26404836
Part#: SG71312PK
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping on orders $49 and up

FTP Motorsport - Corporate Logo
T#:51567153
Part#: SG71479-L-X
Ships in 7 Business Days
New Item
$ 360.00 USD
Free Shipping on orders $49 and up
$ 360.00 USD
Free Shipping on orders $49 and up
FTP Motorsport has engineered this turbo inlet to eliminate the common bottlenecks of the factory design while maintaining direct-fit compatibility. With a focus on flow efficiency, pressure integrity, and thermal stability, this inlet ensures your S58 gets the air it deserves. Whether you're chasing lap times or enhancing your daily driving experience, this upgrade delivers the performance, reliability, and craftsmanship you expect from FTP Motorsport.
Show More Show Less
FTP Motorsport - Corporate Logo
T#:5788177
Part#: FTPG58INTK
Special Order: No Guaranteed ETA
$ 200.00 USD
Free Shipping on orders $49 and up
FTP has devised a solution to the fragile plastic inlet pipe dilemma that plagues most modern turbocharged cars! This intake pipe eliminates the OEM pipe and fits between the air filter and turbo. Due to the metal design, this prevents flexing under boost while also eliminating the worry of cracking! Features: Strengthened metal design Improved air flow to turbo Direct OE Fitment
Show More Show Less