Charge Pipes & Turbo Inlets

ECS Tuning Intake Pipe Upgrade - BMW G30 G32 G11/12 G01 G02 G05 B58 3...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924301

Part#: 090759ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

BMW's OE intake pipe leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates the OEM sound chamber for increased turbo response and mid-range and top-end power

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW F22/23 F3X B58 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:6924273

Part#: 090760ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

BMW's OE intake pipe (13718601682) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply Silicon Couplers

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW G20 G29 G05 G11 A90 Supra B58TU ...

10X Entries Into Our F80 M3 Sweepstakes
Fits Gen 2 (B58TU) engine only

T#:6924303

Part#: 090762ECS09

Ships on Feb 8, 2027

Sale - Save 5% $ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

Qty

Sale - Save 5%

$ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - BMW E84 X1 N20 2.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924264

Part#: 090709ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 484.99

This product was last offered at the strikethrough price on
06-14-2026

$ 460.74 USD

Add to Wish List

Qty

Sale - Save 5%

$ 484.99

This product was last offered at the strikethrough price on
06-14-2026

$ 460.74 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning N20 Charge Pipe & Boost Pipe Kit - BMW F10 528i/i xDrive N...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924297

Part#: 090701ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - F25 F26 N20 2.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:6924265

Part#: 090719ECS09

Ships on Nov 23, 2026

Sale - Save 5% $ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Turbo Outlet Boost Pipe - BMW E82/88 E9X N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924314

Part#: 090692ECS09

Ships on Feb 11, 2027

Sale - Save 15% $ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

Qty

Sale - Save 15%

$ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW F10/12 M5 M6 S63 4.4L

10X Entries Into Our F80 M3 Sweepstakes

T#:6924291

Part#: 090713ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 271.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 271.99 USD

Add to Wish List

If you are looking to improve your intake system, two major components to consider are your charge pipes. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 4-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

FTP Turbo Inlet - F1X/F2X/F3X N20

T#:583743

Part#: SG71442

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe Package - F2X/F3X N55 ...

T#:578662

Part#: SG71337F

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

ECS Tuning Lower Charge Pipe Kit - E82/88 E9X N54/N55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:6924267

Part#: 090725ECS09

Special Order: No Guaranteed ETA

Sale - Save 25% $ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 179.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 179.24 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

FTP Motorsport High Performance Charge Pipe - F2X/F3X N55

T#:581354

Part#: SG71337

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Upper Charge Pipe and Boost Pipe Kit - F1X N55 ...

T#:582213

Part#: SG71342F

Special Order: No Guaranteed ETA

$ 305.99 USD

Add to Wish List

Qty

$ 305.99 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. Changing both the charge pipe and turbo outlet or "boost pipe" allows the engine to reliably hold any amount of boost that's required, and alleviates the headache of having to do the job twice. Features: Increased Flow and Reliability Direct OEM Replacement 3-Ply Silicon Couplers Bung for water injection

Show More Show Less

FTP Motorsport Charge Pipe - Black - G20 G29 G05 G11 & A90 Supra B58T...

T#:586884

Part#: SG71444

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

Boost Pipe C-Clip

10X Entries Into Our F80 M3 Sweepstakes

T#:21275548

Part#: SG71382-C2

Special Order: No Guaranteed ETA

Sale - Save 25% $ 43.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 43.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.99 USD

Add to Wish List

Are you missing your charge pipe O-Ring or C-Clip, or have they been damaged during installation or removal of your charge pipe? This replacement set is the perfect choice for OE-style fitment and function!

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58

For B58 Gen1 Engines Only - Will Not Fit B58 Gen2 (B58TU) Engines

T#:578620

Part#: SG71391

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP Motorsport Boost Pipe - F2X, F3X N20

T#:578639

Part#: SG71335-BP

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This Boost pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Connects turbo to intercooler. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

Silicone Intake Inlet Upgrade - Black - F Chassis B58

Works with the factory BMW intake and most aftermarket intakes

T#:5269553

Part#: FB58INTKINLETBLK

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe

Injen SES Intercooler Charge Pipe - Wrinkle Black - BMW F22/23 F3X M2...

T#:26704986

Part#: SES1128ICPWB

In Stock at Vendor

$ 420.99 USD

Add to Wish List

Qty

$ 420.99 USD

Add to Wish List

The Injen SES21128ICP Cold Side Intercooler pipe is the next logical step in your search for power gains in your N55 equipped BMW. This easy to install performance charge pipe system allows that turbocharged engine to breathe deeper to unleash that additional performance that you’ve been craving. These charge pipes pair perfectly with our cold air intake systems for even greater performance gains! The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance intercooler charge pipe system to develop some serious bolt-on power. The soul of this charge pipe system is with our mandrel-bent, over-sized and stepped 3.00” to 2.50” T6-6061 aluminum tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! The engineering team also developed precision CNC machined adapter flanges that mimic the OE-Style connections for a clean and simple install. Cold Side only Intercooler Charge Pipe System Manufactured from 3.00” stepped to 2.50” Lightweight T6-6061 Aluminum Piping Oversized piping reduces restriction providing increased airflow to the engine Our aluminum piping replaces the brittle, failure-prone factory unit. Precision CNC machined quick connect flanges for an OE-Style attachment Includes one 1/8” Female NPT bung Available in Polished, Wrinkle Black, and Wrinkle Red finishes Seamlessly adapts with the OE Intercooler Precision CNC machined, and TIG-Welded sensor flanges included Stainless Steel Band Clamp with Inner Protective Liner Automotive Grade Silicone Couplers Unique Injen Logo Plate for a Refined Style Increase Throttle Response and Decreases Turbo Lag Mandrel-bent Tubing for Increased Flow Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation

Show More Show Less

aFe Power BladeRunner Black Intercooler Tube Cold Side W/ Coupling An...

T#:391159

Part#: 46-20229-B

Back Ordered

$ 457.00 USD

Add to Wish List

Qty

$ 457.00 USD

Add to Wish List

Perfect Fit:
Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.

Mandrel-bent Tubing:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated textured-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion.

aFe Badging:
Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style.

Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (t) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (t) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20

Note: This intercooler tube is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.

Show More Show Less

FTP Motorsport Charge Pipe - F1X 535i 640i N55 3.0L

T#:582214

Part#: SG71342

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

ECS Tuning Upper Charge Pipe and Boost Pipe Kit - BMW F02 F06/12/13 F...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924311

Part#: 090703ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 438.99

This product was last offered at the strikethrough price on
06-14-2026

$ 395.09 USD

Add to Wish List

Qty

Sale - Save 10%

$ 438.99

This product was last offered at the strikethrough price on
06-14-2026

$ 395.09 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

FTP Motorsport Turbo Inlet Pipe - F22/23 F3X B48/46

T#:578631

Part#: SG71413

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes.

Show More Show Less

MINI Cooper High Flow N14 Intake Hose Kit | Black

T#:588982

Part#: 56-314201

Ships in 2 Business Days

Sale - Save 5% $ 117.99

This product was last offered at the strikethrough price on
08-31-2026

$ 111.58 USD

Add to Wish List

Qty

Sale - Save 5%

$ 117.99

This product was last offered at the strikethrough price on
08-31-2026

$ 111.58 USD

Add to Wish List

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI's performance with the M7 Speed 100% silicone four-ply fiber reinforced intake hose, a direct OE replacement part designed to enhance durability, airflow, and service life. Not only does it improve performance, but it also adds a sleek under-hood WOW factor that MINIs desperately need.

M7 Speed proudly introduces its newly developed intake hose for all MINIs equipped with the N14 turbocharged engine, available in four standard M7 colors (BLACK, RED, BLUE, and GREEN). Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, ensuring hassle-free installation without any modifications. This eliminates the risk of triggering a Check Engine Light (DTC code) by disrupting the PCV electrical connection. The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

Made from 100% silicone, resistant to oil and most chemical damage.
Designed for high temperature (300°F [149°C]) continuous service.
Four-ply fiber reinforced construction for maximum strength and durability.
Retains stock PCV connection location and size for ease of installation.
No modifications or cutting required for installation.
33% larger inside flow volume compared to the stock part.
Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
Available in four standard M7 colors.
2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
Easy DIY installation.

Show More Show Less

FTP Motorsport Intake Pipe - G30 G32 G11 G01 G02 B58

T#:586881

Part#: SG71436

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

VRSF Charge Pipe - 335d Coolant Tank & Relocated Intake Inlets - E9X ...

We Price Match - Give Us A Call or Chat!

T#:638281

Part#: 335D10901025

Back Ordered

Starting at $ 460.98 USD

Add to Wish List

Starting at $ 460.98 USD

Add to Wish List

Increase throttle response and decreases turbo lag with the VRSF charge pipe for your 135i/335i/335is. VRSF's aluminum charge pipe features a CNC billet aluminum OEM throttle body flange and is finished in powder-coated black. The VRSF charge pipe retains the OEM c-clip in order to provide a better seal over a conventional clamp/coupler design. This charge pipe is offered with the Tial BOV flange only. Two plugged water injection bungs are included for those who are currently using water injection or interested in using water injection in the future. This charge pipe will only fit cars with relocated inlets and was designed to fit around the 335d coolant tank. VRSF's charge pipes include 2 plugged water injection bungs, caps to cover your intake recirculation ports, and the couplers and clamps necessary for installation.

Show More Show Less

FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...

T#:586830

Part#: SG71312FG-9

Special Order: No Guaranteed ETA

$ 24.95 USD

Add to Wish List

Qty

$ 24.95 USD

Add to Wish List

Replacement Intake pipe C-clip and o-ring.

FTP Turbo Inlet Pipe - F22 F3X F87 N55

T#:582215

Part#: SG71443

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

The Inlet pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. The FTP inlet pipe replaces the factory hose between the air filter and turbo and will not expand under boost. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates factory sound chamber

Show More Show Less

ECS Tuning Charge Pipe & Intake Pipe Kit - BMW G20 G29 G30 G32 G11/12...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924290

Part#: 090774ECS09

Special Order: No Guaranteed ETA

$ 375.99 USD

Add to Wish List

Qty

$ 375.99 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and intake pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

BMS Turbo Inlet Upgrade - F Chassis B58

T#:5108987

Part#: B58FTURBINLET

Back Ordered

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

The Burger Motorsports upgraded turbo inlet pipe maximizes and smooths airflow from the intake to the turbo by removing all restrictions creating more power and better turbo efficiency. The Burger Motorsports turbo Inlet pipe is a direct replacement for the plastic restrictive OEM unit.

Show More Show Less

FTP Motorsport Charge Pipe - Red - G20 G29 G05 G11 & A90 Supra B58TU ...

T#:840347

Part#: SG71444-R

Special Order: No Guaranteed ETA

$ 275.99 USD

Add to Wish List

Qty

$ 275.99 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement - Replaces BMW p/n 13718651066 Larger than stock diameter for increased charge-air volume

Show More Show Less

FTP Motorsport Boost Pipe - F15/16 X5 X6 N55

T#:586845

Part#: SG71375

Special Order: No Guaranteed ETA

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

This Boost pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Connects intercooler to turbo. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than the stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

BMW F56 B46 B48 JCW Charge And Boost Pipes

10X Entries Into Our F80 M3 Sweepstakes

T#:6908158

Part#: 090750ECS09

Special Order: No Guaranteed ETA

$ 305.99 USD

Add to Wish List

Qty

$ 305.99 USD

Add to Wish List

BMW F56 B46 B48 JCW Charge And Boost Pipes are designed to elevate your Mini Cooper's performance to new heights. Tailored specifically for the F55, F56, F57, and F54 models, these pipes are crafted to enhance airflow and durability, delivering optimal turbocharged efficiency. Turner Motorsport's Charge and Boost Pipes minimize restrictions, resulting in improved throttle response and increased power output. Upgrade your Mini with these precision-engineered pipes to enjoy superior turbo performance and a sleek, high-quality appearance.

Enhanced Airflow: Boosts airflow for optimal turbocharged efficiency.
Increased Power Output: Reduces restrictions for better throttle response and power.
Durable Construction: Engineered for lasting performance and reliability.
Sleek Design: Adds a high-quality, attractive look to your Mini Cooper.

Show More Show Less

aFe Power BladeRunner Charge Pipe Upgrade - F3X 335i/435i (Automatic ...

T#:387730

Part#: 46-20239-B

Back Ordered

20% off MSRP $ 695.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 556.00 USD

Add to Wish List

Qty

20% off MSRP

$ 695.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 556.00 USD

Add to Wish List

On turbocharged motors, the intake piping is put under constant pressure while the engine is running, and has to hold that pressure without leaking. Unfortunately the smallest amount of damage or defect on the intake hoses and the pressure can cause a leak, leaving you without proper boost pressure. Replace your leaking pressure pipe and stop loosing boost.

Product Features and Specifications:

+13 HP / +13 lbs. x ft. Torque max gains
Automatic Transmission only
Outflows factory intercooler tube by 18%
Retains OE style throttle body and intercooler quick connect made from 6061-T6 Billet Aluminum
2-1/2" to 3" Cold-Side mandrel-bent aluminum tubing
Powder-coated wrinkle-black for heat resistance
1/8" NPT ports, are provided for connecting pressure sensors or water methanol injection
5-Ply Polyester Reinforced Silicone coupling for strength
Includes premium stainless steel clamps for a secure fit
Works with OE intercooler
Includes hardware for a hassle-free installation

For automatic transmission only

If manual transmission please purchase T#397175

Show More Show Less

FTP Motorsport Boost pipe - F2X, F3X N55

T#:582219

Part#: SG71337BP

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory piping is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

Dinan Turbo Inlet Fit Kit - 2020+ BMW G01 X3, G02 X4 B58 3.0L ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:40748587

Part#: D763-0101

Special Order: No Guaranteed ETA

Sale - Save 10% $ 58.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.73 USD

Add to Wish List

Qty

Sale - Save 10%

$ 58.59

This product was last offered at the strikethrough price on
09-29-2026

$ 52.73 USD

Add to Wish List

This fit kit is required to fit the Dinan Turbo Inlet (D760-0062) to either the OEM intake or the Dinan LCI X3/X4 M40i intake (D760-0075).

FTP Motorsport Intake Pipe - F07/10 F01/02 N55

T#:586879

Part#: SG71432

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

CTS Turbo N54 Chargepipe - E82, E90, E60 N54

T#:584958

Part#: CTS-IT-910

Special Order: No Guaranteed ETA

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

The factory N54 chargepipe is made of plastic and is prone to failure especially as the mileage starts to add up. This replacement chargepipe from CTS Turbo installs easily and holds stock and increased boost levels with ease.

Show More Show Less

FTP Motorsport Boost Pipe - E9X E8X N55

T#:582436

Part#: SG71312-BP

Special Order: No Guaranteed ETA

$ 220.00

This product was last offered at the strikethrough price on
06-24-2026

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

Replace your failure prone factory BMW boost pipe with an FTP Motorsport aluminum piece. Stronger and more reliable than the OEM plastic piece that connects the intercooler to the turbo.

ECS Tuning Charge Pipe & Boost Pipe Kit - F25/F26 X3 X4 N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924309

Part#: 090717ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 497.99

This product was last offered at the strikethrough price on
06-14-2026

$ 473.09 USD

Add to Wish List

Qty

Sale - Save 5%

$ 497.99

This product was last offered at the strikethrough price on
06-14-2026

$ 473.09 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

CTS Turbo Charge Pipe w/Meth Bung - N54

T#:5802149

Part#: CTS-IT-900

Special Order: No Guaranteed ETA

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

CTS Turbo is proud to release their N54 BOV kit designed exclusively for use with TiAL Q atmospheric Blow off Valve! With a sharp look, the kit features 2 water-methanol bungs, 1/8' NPT plugs for those of you not using the meth bungs, and a CNC machined MAP sensor flange for seamless installation of the OEM MAP sensor. This kit offers an OEM like fit, with an aggressive aftermarket sound. Replacing the flimsy plastic charge piping and failure prone diverter valve system are definitely benefits, but adding awesome sound and increasing your ability to hold boost under heavy loads are icing on the cake. Features: T6061 Mandrel Bent Aluminum Pipe Robust Black Powder coated Finish CNC Machined MAP flange 4 ply silicon connectors Stainless Steel Clamps Laser etched CTS Turbo Logo 2 x 1/8″ NPT Water Methanol bungs with associated plugs **Note: BOV sold separately.

Show More Show Less

FTP Motorsport Charge pipe and Boost Pipe Kit - F10 528i N20 ...

T#:578681

Part#: SG71341F

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

Silicone Intake Inlet Upgrade - Blue - F Chassis B58

Works with the factory BMW intake and most aftermarket intakes

T#:5269555

Part#: FB58INTKINLETBLU

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Paradigm Engineering B58 BMW silicone intake pipe upgrade smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.

Show More Show Less

FTP Motorsport S58 Turbo Inlets & Intake Pipes - BMW G80 M3, G82/83 M...

T#:37217360

Part#: SG71479

Special Order: No Guaranteed ETA

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

BMW plastic intake and turbo inlet pipes are known to crack or split, leading to CELs and rough running issues. These aluminum turbo inlet and intake pipes from FTP Motorsport are designed to directly replace the stock plastic pipes, giving you peace of mind and increased intake airflow. Constructed using 6061 aluminum, these pipes are lightweight while being significantly stronger and more durable than the OE plastic turbo inlet pipes.

Show More Show Less

Aluminum Charge Pipe

T#:9222699

Part#: 1391058030

In Stock

$ 269.99

This product was last offered at the strikethrough price on
09-08-2026

$ 245.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 269.99

This product was last offered at the strikethrough price on
09-08-2026

$ 245.99 USD

Limited Qty Sale

Add to Wish List

MINI Cooper Cold Side Intercooler Elbow Kit - Red

T#:29002132

Part#: 56-330202

In Stock

Sale - Save 5% $ 146.99

This product was last offered at the strikethrough price on
08-31-2026

$ 139.53 USD

Add to Wish List

Qty

Sale - Save 5%

$ 146.99

This product was last offered at the strikethrough price on
08-31-2026

$ 139.53 USD

Add to Wish List

VRSF S55 Turbo to Charge Pipe O-Ring Pair - F8X M3 M4, F87 M2 Competi...

We Price Match - Give Us A Call or Chat!

T#:585044

Part#: OR300

In Stock

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

This is a pair (2) of replacement turbo to charge pipe o-rings for your S55 BMW. If your BMW has an S55, this will replace the existing/worn turbo outlet o-rings that sit inside the charge pipe.

MINI Cooper N14 N18 High Flow Hot Side & Cold Side Pipes - Red ...

T#:584430

Part#: 56-330302

Ships in 1-2 days

Sale - Save 5% $ 260.99

This product was last offered at the strikethrough price on
08-31-2026

$ 247.58 USD

Add to Wish List

Qty

Sale - Save 5%

$ 260.99

This product was last offered at the strikethrough price on
08-31-2026

$ 247.58 USD

Add to Wish List

VRSF 2" N54 Turbo Outlet Charge Pipe O-Ring Pair - E9X E82/88 E60 N54...

We Price Match - Give Us A Call or Chat!

T#:4744843

Part#: 625018

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Replacement o-rings for the VRSF turbo to turbo outlet connections for your N54 BMW. Fits the following VRSF part numbers (as well as most other brand charge pipes): 10901030 & 10901045.

MINI Intake Charge Pipe Lite - F56 JCW

T#:23681816

Part#: 1391056301

Ships in 6 Business Days

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Key Features:

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results