Charge Pipes & Turbo Inlets

FTP Turbo Intake Pipe - G20 M340 A90 Supra B58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588013

Part#: SG71449

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This runs from the intake box to the turbo inlet. This intake pipe from FTP Motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Charge Pipe Set - F10/12 M5 M6 S63

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582221

Part#: SG71376

Special Order: No Guaranteed ETA

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Intake Pipe - F22/23 F3X B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586882

Part#: SG71439

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

FTP Motorsport Intake Pipe - G20 G29 G30 G32 G11 G01 G02 B48/B46 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586883

Part#: SG71440

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

Line - Turbocharger-Coolant Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:36913360

Part#: 11538666857

Ships on Aug 11, 2026

Sale - Save 10% $ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 68.39 USD

Add to Wish List

Qty

Sale - Save 10%

$ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 68.39 USD

Add to Wish List

FTP Motorsport Charge Pipe - F22/23 F3X B48 B46

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578627

Part#: SG71386

Special Order: No Guaranteed ETA

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

Turbo Inlet Pipe Upgrade - N20/N26

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:585582

Part#: BW-N2002

Ships in 6 Business Days

$ 293.99 USD

Add to Wish List

Qty

$ 293.99 USD

Add to Wish List

The OEM inlet pipe is made of plastic and is prone to failure. Replace this flimsy piece with the newly designed turbo inlet from MST Performance. This inlet is constructed from CNC-machined billet 6061 aluminum and wire re-enforced multi-ply silicone. It is much more reliable under stock levels of boost, and can handle higher boost levels as well. After installation, you can expect improved turbo response, increased flow, and decreased turbo lag. Guaranteed to increase horsepower Improve turbo response and less turbo lag. Big diameter silicone hose Wire-reinforcedmulti-ply silicone construction CNC-machined billet 6061 aluminum

Show More Show Less

FTP Motorsport Charge Pipe - E60 N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583069

Part#: SG71312FG-5

Special Order: No Guaranteed ETA

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. The FTP BMW N54 Charge Pipe both increases flow and improves the reliability of your twin turbo BMW. The 3" mandrel-bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine.

Show More Show Less

FTP Motorsport Lower Charge Pipe - E9X, E8X N54/N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582199

Part#: SG71414

Special Order: No Guaranteed ETA

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

This is a replacement boost pipe that is made from solid aluminum so it won't break, come loose or deteriorate over time. Connects intercooler to upper charge pipe. Features: Increased throttle response and decreases turbo lag Powder-coated black aluminum piping Throttle body matched 3 "piping Billet CNC OEM TB Flange for a leak-free connection Includes everything necessary to upgrade from the factory charge pipe

Show More Show Less

FTP Motorsport Charge Pipe - E9X E8X (N55)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583183

Part#: SG71312

Special Order: No Guaranteed ETA

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. The FTP BMW N55 Charge Pipe both increases flow and improves the reliability of your twin turbo BMW. The 3" mandrel bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine. Increased Flow Direct OEM Replacement 3in Mandrel-Bent Aluminum Construction 4-Play Silicon Couplers

Show More Show Less

FTP Motorsport Charge Pipe Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582220

Part#: SG71359

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This set of aluminum pipes replace the brittle factory plastic pipe which can fail under increased boost pressure, or simply under spirited driving. In addition, The increased diameter helps to reduce turbulence and maximize airflow into the engine. Changing both the charge pipe and turbo outlet or "boost pipe" allows the engine to reliably hold any amount of boost that's required, and alleviates the headache of having to do the job twice. Features: Increased Flow and Reliability Direct OEM Replacement 3-Ply Silicon Couplers Bung for water injection

Show More Show Less

F55/F56/F57/F54 Cooper JCW Charge And Boost Pipes Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:593605

Part#: 71381-JCW

Special Order: No Guaranteed ETA

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Upgrade your B48/B46 JCW engine MINI Cooper with the FTP Charge Pipe for enhanced performance and reliability. This aluminum pipe replaces the factory plastic pipe, offering increased durability and resistance to boost pressure. With a larger piping size, it reduces turbulence and maximizes airflow into the engine, resulting in improved engine efficiency and power output. Experience direct replacement and enjoy a smoother, more responsive driving experience with the FTP Charge Pipe.

Increases flow and improves reliability
Replaces brittle factory plastic pipe
Reduces turbulence for maximum airflow
Direct replacement for easy installation

Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe Kit - F25/26 X3/X4 N55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582212

Part#: SG71383

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This set of aluminum pipes replace the brittle factory plastic pipe which can fail under increased boost pressure, or simply under spirited driving. In addition, The increased diameter helps to reduce turbulence and maximize airflow into the engine. Changing both the charge pipe and turbo outlet or "boost pipe" allows the engine to reliably hold any amount of boost that's required, and alleviates the headache of having to do the job twice. Features: Increased Flow and Reliability Direct OEM Replacement 3-Ply Silicon Couplers Bung for water injection

Show More Show Less

2.0T Charge pipe and intake pipe for G-B48

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3047553

Part#: SG71386-FG

Special Order: No Guaranteed ETA

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Eliminate oem plastic intake and charge pipe and replace it with FTP Motorsport for added performance and durability. Aluminum pipe replacement for factory plastic pipes that fail. Increased flow with an added 14.8 hp that has been dyno tested. Upgrade your G-B48 with FTP charge pipe kit.

Show More Show Less

FTP Motorsport Charge Pipes - F25 F26 N20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578636

Part#: SG71384

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

MMX Charge Pipe Kit F56 JCW MINI Cooper B48

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4182515

Part#: MMR02-1402

Special Order: No Guaranteed ETA

$ 595.99 USD

Add to Wish List

Qty

$ 595.99 USD

Add to Wish List

ECS Tuning Turbo Outlet Boost Pipe - BMW F22/23 F3X N55 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924317

Part#: 090698ECS09

In Stock

Sale - Save 15% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

FTP Motorsport High-Flow Billet Turbo Inlet Pipes - Lite Version - BM...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46444146

Part#: SG71379-L

Special Order: No Guaranteed ETA

$ 360.00 USD

Add to Wish List

Qty

$ 360.00 USD

Add to Wish List

FTP Motorsport has engineered this turbo inlet to eliminate the common bottlenecks of the factory design while maintaining direct-fit compatibility. With a focus on flow efficiency, pressure integrity, and thermal stability, this inlet ensures your S58 gets the air it deserves. Whether you're chasing lap times or enhancing your daily driving experience, this upgrade delivers the performance, reliability, and craftsmanship you expect from FTP Motorsport.

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW G20 G29 G05 G11 A90 Supra B58TU ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fits Gen 2 (B58TU) engine only

T#:6924303

Part#: 090762ECS09

In Stock

Sale - Save 5% $ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

Qty

Sale - Save 5%

$ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW F22/23 F3X B58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924273

Part#: 090760ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

BMW's OE intake pipe (13718601682) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply Silicon Couplers

Show More Show Less

ECS Tuning N20 Charge Pipe & Boost Pipe Kit - BMW F10 528i/i xDrive N...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924297

Part#: 090701ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW F22/23 F3X G30 G32 G11 G01 G02 B48/B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fits the Gen 1 B48/B46 engine only! Not compatible with the B48TU/B46TU engine

T#:6924302

Part#: 090720ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 383.99

This product was last offered at the strikethrough price on
06-14-2026

$ 345.59 USD

Add to Wish List

Qty

Sale - Save 10%

$ 383.99

This product was last offered at the strikethrough price on
06-14-2026

$ 345.59 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag Powder-coated black aluminum piping CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection Includes everything necessary to upgrade from factory chargepipe 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Turbo Inlet Boost Pipe - BMW G20 G29 A90 Supra B58 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924275

Part#: 090764ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 246.99

This product was last offered at the strikethrough price on
06-14-2026

$ 234.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 246.99

This product was last offered at the strikethrough price on
06-14-2026

$ 234.64 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW G30 G32 G11/12 G01 G02 G05 B58 3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924301

Part#: 090759ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

BMW's OE intake pipe leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates the OEM sound chamber for increased turbo response and mid-range and top-end power

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - F25 F26 N20 2.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924265

Part#: 090719ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Turbo Outlet Boost Pipe - BMW F22/23 F3X N20 2.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924248

Part#: 090696ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe Pipe Kit - BMW E71 X6 F01/02 N54 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6940389

Part#: 090767ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 266.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 266.04 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Turbo Outlet Boost Pipe - BMW E82/88 E9X N55 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924314

Part#: 090692ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

Qty

Sale - Save 15%

$ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW G20 G29 G30 G32 G11/12 G01 G02 B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924274

Part#: 090761ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

BMW's OE intake pipe (13718663614 & 13718656981) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - BMW E84 X1 N20 2.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924264

Part#: 090709ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 484.99

This product was last offered at the strikethrough price on
06-14-2026

$ 460.74 USD

Add to Wish List

Qty

Sale - Save 5%

$ 484.99

This product was last offered at the strikethrough price on
06-14-2026

$ 460.74 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW F10/12 M5 M6 S63 4.4L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924291

Part#: 090713ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 271.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 271.99 USD

Add to Wish List

If you are looking to improve your intake system, two major components to consider are your charge pipes. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 4-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

FTP Turbo Inlet - F1X/F2X/F3X N20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583743

Part#: SG71442

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - F3X N20 2.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924304

Part#: 090697ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 509.99

This product was last offered at the strikethrough price on
06-14-2026

$ 484.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 509.99

This product was last offered at the strikethrough price on
06-14-2026

$ 484.49 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

Charge And Boost Pipes - JCW

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:637229

Part#: 1391056382

Special Order: No Guaranteed ETA

$ 289.99 USD

Add to Wish List

Qty

$ 289.99 USD

Add to Wish List

Elevate Your MINI with Racing Dynamics Suspension Accessories

Since the early 1980s with BMW and later with MINI in the early 2000s, Racing Dynamics has built a reputation for improving the performance and styling of MINIs. They offer high-quality parts that maximize your car's potential while preserving MINI's goal of seamlessly combining luxury and performance.

ECS is proud to introduce Racing Dynamics suspension accessories that will enhance your MINI Cooper's handling and transform it into a precision cornering instrument. These parts are built to exacting standards and have a proven track record over time. Discover the difference that Racing Dynamics parts can make for your MINI.

Key Features:

Direct replacement for original parts
Includes a 1/8" NPC thread bung for water injection
Replaces brittle OE plastic pipes with robust aluminum pipes, resistant to high temperatures and boost pressure
Compatible with F56+ JCW Models

Elevate your MINI Cooper's performance with Racing Dynamics.

Show More Show Less

FTP Motorsport Boost Pipe - F2X, F3X N20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578639

Part#: SG71335-BP

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This Boost pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Connects turbo to intercooler. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

aFe Power BladeRunner Black Intercooler Tube Cold Side W/ Coupling An...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:391159

Part#: 46-20229-B

Back Ordered

$ 457.00 USD

Add to Wish List

Qty

$ 457.00 USD

Add to Wish List

Perfect Fit:
Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.

Mandrel-bent Tubing:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated textured-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion.

aFe Badging:
Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style.

Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (t) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (t) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20

Note: This intercooler tube is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.

Show More Show Less

Injen SES Intercooler Charge Pipe - Wrinkle Black - BMW F22/23 F3X M2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26704986

Part#: SES1128ICPWB

Back Ordered

$ 420.99 USD

Add to Wish List

Qty

$ 420.99 USD

Add to Wish List

The Injen SES21128ICP Cold Side Intercooler pipe is the next logical step in your search for power gains in your N55 equipped BMW. This easy to install performance charge pipe system allows that turbocharged engine to breathe deeper to unleash that additional performance that you’ve been craving. These charge pipes pair perfectly with our cold air intake systems for even greater performance gains! The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance intercooler charge pipe system to develop some serious bolt-on power. The soul of this charge pipe system is with our mandrel-bent, over-sized and stepped 3.00” to 2.50” T6-6061 aluminum tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! The engineering team also developed precision CNC machined adapter flanges that mimic the OE-Style connections for a clean and simple install. Cold Side only Intercooler Charge Pipe System Manufactured from 3.00” stepped to 2.50” Lightweight T6-6061 Aluminum Piping Oversized piping reduces restriction providing increased airflow to the engine Our aluminum piping replaces the brittle, failure-prone factory unit. Precision CNC machined quick connect flanges for an OE-Style attachment Includes one 1/8” Female NPT bung Available in Polished, Wrinkle Black, and Wrinkle Red finishes Seamlessly adapts with the OE Intercooler Precision CNC machined, and TIG-Welded sensor flanges included Stainless Steel Band Clamp with Inner Protective Liner Automotive Grade Silicone Couplers Unique Injen Logo Plate for a Refined Style Increase Throttle Response and Decreases Turbo Lag Mandrel-bent Tubing for Increased Flow Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation

Show More Show Less

MINI Cooper High Flow N14 Intake Hose Kit | Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588982

Part#: 56-314201

Back Ordered

$ 117.99 USD

Add to Wish List

Qty

$ 117.99 USD

Add to Wish List

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI's performance with the M7 Speed 100% silicone four-ply fiber reinforced intake hose, a direct OE replacement part designed to enhance durability, airflow, and service life. Not only does it improve performance, but it also adds a sleek under-hood WOW factor that MINIs desperately need.

M7 Speed proudly introduces its newly developed intake hose for all MINIs equipped with the N14 turbocharged engine, available in four standard M7 colors (BLACK, RED, BLUE, and GREEN). Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, ensuring hassle-free installation without any modifications. This eliminates the risk of triggering a Check Engine Light (DTC code) by disrupting the PCV electrical connection. The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

Made from 100% silicone, resistant to oil and most chemical damage.
Designed for high temperature (300°F [149°C]) continuous service.
Four-ply fiber reinforced construction for maximum strength and durability.
Retains stock PCV connection location and size for ease of installation.
No modifications or cutting required for installation.
33% larger inside flow volume compared to the stock part.
Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
Available in four standard M7 colors.
2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
Easy DIY installation.

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For B58 Gen1 Engines Only - Will Not Fit B58 Gen2 (B58TU) Engines

T#:578620

Part#: SG71391

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP Motorsport Turbo Inlet Pipe - F22/23 F3X B48/46

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578631

Part#: SG71413

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes.

Show More Show Less

ECS Tuning Lower Charge Pipe Kit - E82/88 E9X N54/N55 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924267

Part#: 090725ECS09

Special Order: No Guaranteed ETA

Sale - Save 25% $ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 179.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 179.24 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

BMW F56 B46 B48 JCW Charge And Boost Pipes

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6908158

Part#: 090750ECS09

Special Order: No Guaranteed ETA

$ 305.99 USD

Add to Wish List

Qty

$ 305.99 USD

Add to Wish List

BMW F56 B46 B48 JCW Charge And Boost Pipes are designed to elevate your Mini Cooper's performance to new heights. Tailored specifically for the F55, F56, F57, and F54 models, these pipes are crafted to enhance airflow and durability, delivering optimal turbocharged efficiency. Turner Motorsport's Charge and Boost Pipes minimize restrictions, resulting in improved throttle response and increased power output. Upgrade your Mini with these precision-engineered pipes to enjoy superior turbo performance and a sleek, high-quality appearance.

Enhanced Airflow: Boosts airflow for optimal turbocharged efficiency.
Increased Power Output: Reduces restrictions for better throttle response and power.
Durable Construction: Engineered for lasting performance and reliability.
Sleek Design: Adds a high-quality, attractive look to your Mini Cooper.

Show More Show Less

FTP Motorsport Intake Pipe - G30 G32 G11 G01 G02 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586881

Part#: SG71436

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

FTP Motorsport Charge pipe and Boost Pipe Kit - F10 528i N20 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578681

Part#: SG71341F

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

FTP Turbo Inlet Pipe - F22 F3X F87 N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582215

Part#: SG71443

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

The Inlet pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. The FTP inlet pipe replaces the factory hose between the air filter and turbo and will not expand under boost. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates factory sound chamber

Show More Show Less

CTS Turbo Charge Pipe w/Meth Bung - N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5802149

Part#: CTS-IT-900

Special Order: No Guaranteed ETA

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

CTS Turbo is proud to release their N54 BOV kit designed exclusively for use with TiAL Q atmospheric Blow off Valve! With a sharp look, the kit features 2 water-methanol bungs, 1/8' NPT plugs for those of you not using the meth bungs, and a CNC machined MAP sensor flange for seamless installation of the OEM MAP sensor. This kit offers an OEM like fit, with an aggressive aftermarket sound. Replacing the flimsy plastic charge piping and failure prone diverter valve system are definitely benefits, but adding awesome sound and increasing your ability to hold boost under heavy loads are icing on the cake. Features: T6061 Mandrel Bent Aluminum Pipe Robust Black Powder coated Finish CNC Machined MAP flange 4 ply silicon connectors Stainless Steel Clamps Laser etched CTS Turbo Logo 2 x 1/8″ NPT Water Methanol bungs with associated plugs **Note: BOV sold separately.

Show More Show Less

FTP Motorsport Charge Pipe - Black - G20 G29 G05 G11 & A90 Supra B58T...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586884

Part#: SG71444

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

Silicone Intake Inlet Upgrade - Black - F Chassis B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Works with the factory BMW intake and most aftermarket intakes

T#:5269553

Part#: FB58INTKINLETBLK

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe

VRSF Charge Pipe - 335d Coolant Tank & Relocated Intake Inlets - E9X ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:638281

Part#: 335D10901025

Back Ordered

Starting at $ 460.98 USD

Add to Wish List

Starting at $ 460.98 USD

Add to Wish List

Increase throttle response and decreases turbo lag with the VRSF charge pipe for your 135i/335i/335is. VRSF's aluminum charge pipe features a CNC billet aluminum OEM throttle body flange and is finished in powder-coated black. The VRSF charge pipe retains the OEM c-clip in order to provide a better seal over a conventional clamp/coupler design. This charge pipe is offered with the Tial BOV flange only. Two plugged water injection bungs are included for those who are currently using water injection or interested in using water injection in the future. This charge pipe will only fit cars with relocated inlets and was designed to fit around the 335d coolant tank. VRSF's charge pipes include 2 plugged water injection bungs, caps to cover your intake recirculation ports, and the couplers and clamps necessary for installation.

Show More Show Less

CTS Turbo N54 Chargepipe - E82, E90, E60 N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:584958

Part#: CTS-IT-910

Special Order: No Guaranteed ETA

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

The factory N54 chargepipe is made of plastic and is prone to failure especially as the mileage starts to add up. This replacement chargepipe from CTS Turbo installs easily and holds stock and increased boost levels with ease.

Show More Show Less

Project Cars

SELECT YOUR BMW

Elevate Your MINI with Racing Dynamics Suspension Accessories

Key Features:

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Key Features:

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results