Oiling System

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice. 

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

• 1x Aluminum Crank Bolt Capture
• 8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54 

Upgrade your BMW's oil system with the VAC Motorsports N55 Oil Pan Baffle, an essential component for track and street enthusiasts. Engineered to maintain oil surrounding the pick-up at all times, this baffle is crucial for preventing oil pressure loss during hard cornering and acceleration. Trusted by some of the fastest BMWs worldwide, this baffle ensures engine longevity and performance under extreme conditions. Don't risk catastrophic engine failure—equip your BMW with the VAC Motorsports N55 Oil Pan Baffle today.

Benefits:

• Prevents significant loss of oil pressure
• Vital for track and street use
• Ensures engine longevity and performance
• Trusted by high-performance BMWs worldwide

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

BMW B58 / S58 Blue Billet Engine Fluid Cap Set is the perfect combination of style, durability, and performance, designed to enhance the look and function of your BMW’s engine bay. Crafted from high-quality billet aluminum, this cap set is engineered to be a direct replacement for the factory caps, ensuring a precise fit and long-lasting dependability. Unlike cheap plastic covers, these caps fully replace your OEM components while maintaining the critical pressure relief functionality.

Designed with both aesthetics and performance in mind, the anodized blue finish adds a sleek, high-performance look to your engine bay while providing excellent resistance to heat, corrosion, and wear. The set includes billet engine fluid caps that require transferring the OEM pressure relief valves to ensure optimal system performance.

• Direct replacement design – Replaces factory caps for a secure and precise fit
• Anodized blue finish – Enhances engine bay aesthetics with a stylish, high-performance look
• CNC-machined billet aluminum construction – Ensures superior durability and longevity
• OEM pressure relief compatibility – Maintains factory pressure relief function for safe operation
• Heat and corrosion-resistant – Built to withstand extreme engine conditions
• Easy installation – Requires swapping the pressure relief valves from your original caps

Upgrade your BMW with the BMW B58 / S58 Blue Billet Engine Fluid Cap Set for a premium look and high-performance functionality.

BMW B58 / S58 Silver Billet Engine Fluid Cap Set is a high-quality upgrade that replaces the factory plastic caps with durable billet aluminum for enhanced strength and a sleek, premium appearance. Designed for a perfect fit, this cap set enhances both the aesthetics and functionality of your BMW’s engine bay.

Unlike adhesive overlays or plastic replacements, these billet aluminum caps completely replace the OEM components while retaining essential pressure relief functionality. The precision-machined silver finish offers a refined look while providing superior resistance to heat, corrosion, and wear.

• Direct replacement – Replaces OEM caps entirely for a factory-like fit
• Sleek silver finish – Provides a clean, high-end appearance
• Billet aluminum construction – Offers long-lasting durability and strength
• OEM pressure relief compatibility – Maintains proper system function
• Heat and corrosion-resistant – Engineered to withstand extreme conditions
• Easy installation – Requires transferring OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Silver Billet Engine Fluid Cap Set, the perfect blend of style and performance for enthusiasts who demand the best.

BMW B58 / S58 Black Billet Engine Fluid Cap Set is a premium upgrade designed to enhance both the performance and aesthetics of your BMW’s engine bay. Crafted from high-quality billet aluminum, this cap set provides superior durability while replacing the factory plastic caps for a sleek, high-end look.

Engineered to maintain full OEM functionality, these caps integrate the original pressure relief valves, ensuring proper system operation. The deep black anodized finish adds a bold and aggressive appearance while offering excellent resistance to heat and corrosion.

• Precision-machined billet aluminum – Stronger and more durable than factory plastic caps
• OEM pressure relief compatibility – Ensures safe and reliable system performance
• Sleek black anodized finish – Adds a high-performance look to your engine bay
• Heat and corrosion-resistant – Built to withstand extreme conditions for long-lasting reliability
• Direct replacement design – Fully replaces factory caps for a seamless fit
• Simple installation – Requires swapping OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Black Billet Engine Fluid Cap Set, combining premium style with high-performance reliability.