Oiling System

Oil Filter Housing Gasket Kit

T#:5403248

Part#: 11427537293TMSKT

In Stock

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

Liqui Moly Top Tec 6600 0W-20 Oil Change Kit - BMW F22/23 F3X G01/02 ...

T#:24145950

Part#: B48LMTTOSKT

In Stock

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: 6L Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with o-ring Oil Drain Plug with o-ring

Show More Show Less

URO Premium Oil Filter Cap - Aluminum Upgrade

2X Entries For Our G87 M2 Sweepstakes!

T#:587658

Part#: 11427525334PRM

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Get away from easily cracked plastic and ensure durability with this aluminum oil filter cap.

N54/N55 Low Temp Oil Thermostat Kit - 70c

T#:52621839

Part#: 008731KT1

In Stock

Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Qty

Sale - Save 23%

$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Oil Pan Gasket - With Bolts

T#:5403247

Part#: 11132210959TMSKT

In Stock

Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD

Add to Wish List

Qty

Sale - Save 3%

$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD

Add to Wish List

Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

70c Low Temp Oil Thermostat Kit - N54/N55

T#:30031507

Part#: N54N55LTKT1

Back Ordered

Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Qty

Sale - Save 18%

$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

OEM Oil Filter With Drain Plug - F80 M3, F82 M4

T#:393872

Part#: 11427566327S55

In Stock

Starting at $ 28.37 USD

Add to Wish List

Starting at $ 28.37 USD

Add to Wish List

Replacement oil filter kit with a new drain plug for 2015+ F80 M3/F82 M4. This filter is for the S55 engine, used in the M3/M4 and includes the new drain bolt recommended by BMW during an oil change.

URO Premium Aluminum Oil Pan - BMW E84 F3X F10 E89 N20 N26 2.0L ...

2X Entries For Our G87 M2 Sweepstakes!

T#:639280

Part#: 11137618512PRM

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

If you've broken your factory plastic oil sump, it's time to upgrade! This aluminum pan from URO Parts is a guaranteed fit, featuring heavy-duty construction and an upgraded gasket. An extra drain plug is included for a complete, comprehensive repair. Features: Premium Aluminum Construction vs OEM Plastic Construction Improved gasket by eliminating notches that cause a leak path Guaranteed fitment Manufactured to OE dimensions for proper clearances and easy bolt-on installation High-strength alloy aluminum or stamped-steel construction ensures a warp-free seal between the oil pan and engine block Durable surface coating resists rust (steel models)

Show More Show Less

Oil Pan Gasket Replacement Kit

T#:5403285

Part#: 11137548031TMSKT

In Stock

Sale - Save 1% $ 194.99

This product was last offered at the strikethrough price on
02-16-2026

$ 192.19 USD

Add to Wish List

Qty

Sale - Save 1%

$ 194.99

This product was last offered at the strikethrough price on
02-16-2026

$ 192.19 USD

Add to Wish List

Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

URO Oil Filter Housing And Cooler Assembly - Aluminum Upgrade - BMW G...

2X Entries For Our G87 M2 Sweepstakes!

T#:43750251

Part#: 11428580414PRM

In Stock

$ 397.99 USD

Add to Wish List

Qty

$ 397.99 USD

Add to Wish List

If you have noticed a mixture of coolant and oil, have consistently suffered from unexplained coolant loss, or if your BMW's engine has higher mileage, there is a good chance that your factory plastic oil filter housing has cracked and/or failed. The URO oil filter housing and cooler is a complete replacement of your factory unit, which eliminates the possibility of failure due to weak materials.

Show More Show Less

E30 M3 Lower Oil Pan Gasket

T#:337965

Part#: 11131727983

In Stock

Starting at $ 32.99 USD

Add to Wish List

Starting at $ 32.99 USD

Add to Wish List

E30 M3 Lower Oil Pan Gasket. Have a leaky oil pan? It may be failed oil pan gaskets (either upper or lower). This is the lower oil pan gasket for the S14 engine. We offer this gasket in both cork and paper gasket media.

Show More Show Less

Aluminum Oil Filter Cap

2X Entries For Our G87 M2 Sweepstakes!

T#:587657

Part#: 11427615389A

In Stock

$ 36.36 USD

Add to Wish List

Qty

$ 36.36 USD

Add to Wish List

Secures the oil filter to the filter housing. Made of durable aluminum.

URO Oil Filter Housing And Cooler Assembly - Aluminum Upgrade - BMW F...

2X Entries For Our G87 M2 Sweepstakes!

T#:43750250

Part#: 11428585235PRM

In Stock

Sale - Save 6% $ 264.99

This product was last offered at the strikethrough price on
07-13-2026

$ 250.00 USD

Add to Wish List

Qty

Sale - Save 6%

$ 264.99

This product was last offered at the strikethrough price on
07-13-2026

$ 250.00 USD

Add to Wish List

If you have noticed a mixture of coolant and oil, have consistently suffered from unexplained coolant loss, or if your BMW's engine has higher mileage, there is a good chance that your factory plastic oil filter housing has cracked and/or failed. The URO oil filter housing and cooler is a complete replacement of your factory unit, which eliminates the possibility of failure due to weak materials.

Show More Show Less

Oil Pan

T#:37521040

Part#: 11138590017

In Stock

Sale - Save 39% $ 253.99

This product was last offered at the strikethrough price on
05-03-2026

$ 154.22 USD

Add to Wish List

Qty

Sale - Save 39%

$ 253.99

This product was last offered at the strikethrough price on
05-03-2026

$ 154.22 USD

Add to Wish List

URO Premium Aluminum Oil Filter Housing - BMW Gen 1 B46 B48 2.0L ...

2X Entries For Our G87 M2 Sweepstakes!

T#:32781450

Part#: 11428596283PRM

In Stock

$ 335.99

This product was last offered at the strikethrough price on
03-15-2026

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

BMW is known to use a variety of plastic components in their engine bays. This typically isn't a problem for newer vehicles but for older high-milage vehicles, this often leads to cracking, splitting, and warping problems with any plastic components directly touching the engine or exposed to high heat. This aluminum oil filter housing from URO is designed to alleviate these concerns, eliminating the chance of oil or coolant loss due to plastic failure. Made from high-strength aluminum vs plastic OEM High-strength alloy construction withstands brutal engine heat and vibration that causes plastic to get brittle and crack Durable surface finish resists corrosion Limited Lifetime / Unlimited Mileage Warranty Guaranteed fitment Manufactured to OE oil filter housing dimensions for easy bolt-on installation and reliable sealing High-strength heat and oil-resistant materials ensure a long lifespan Quality control at each step of production

Show More Show Less

Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...

T#:24344808

Part#: N54OFHGKT

In Stock

Sale - Save 4% $ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 163.26 USD

Add to Wish List

Qty

Sale - Save 4%

$ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 163.26 USD

Add to Wish List

If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.

Show More Show Less

URO Engine Oil Pan Gasket - BMW E84 F3X F10 E89 N20 N26 2.0L ...

2X Entries For Our G87 M2 Sweepstakes!

T#:32781447

Part#: 11137618512PRMK

Ships in 2 Business Days

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

When removing your oil pan, it is always a good idea to replace the gasket to ensure you don't experience leaks when the pan is re-installed. This gasket is designed specifically for the URO Premium Aluminum Oil Pan Improved profile and upgraded AEM material to eliminate leaks. Only works on URO Premium Oil Pan Limited Lifetime / Unlimited Mileage Warranty Guaranteed fitment Replaces hardened or cracking engine oil pan gaskets that allow vacuum leakage and degrade engine performance OE-style seal profile and durometer ensures proper compression seal between the engine block and oil pan High-quality seal material resists engine heat and oil degradation 24-Month Unlimited Mileage Warranty

Show More Show Less

Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3.0L ...

T#:27905122

Part#: 11428583895TKT

Ships in 3 Business Days

$ 540.99 USD

Add to Wish List

Qty

$ 540.99 USD

Add to Wish List

BMW's B58 engine has been very successful and has proved to be a reliable powerplant that is highly capable of producing some crazy power figures. Unfortunately, in true BMW fashion, the B58 engine does have a few problems that can become serious issues if not addressed quickly. One of these issues is the oil filter housing cracking and leaking engine oil and/or coolant. BMW chose to construct the oil filter housing out of plastic and the housing tends to split if the cap is tightened too tight or even just over time as the plastic becomes brittle from numerous heat cycles. Another common failure point is the multiple gaskets that seal the housing to the engine block and between the housing and the engine oil cooler. when these seals fail, you will notice coolant and/or oil loss, or even the mixing of engine oil with coolant. There is also the possibility of your oil filter collapsing inside of the filter housing and preventing proper oil filtration and flow, sometimes clogging the small oil channels in your filter housing as the oil filter begins to fall apart. Though this is more common with vehicles that see extended oil change intervals, such as 12K+ mile oil changes, we have seen some failures as soon as 5,000 miles after an oil change! Whatever the cause may be, the solution is almost always the same, replacement of the whole oil filter housing. We have put together a kit including the basic components needed to replace your oil filter housing and get your BMW back on the road! Included: Bremmen Engine Oil Filter Housing - Includes a new cap, seals, oil cooler, and oil filter Genuine BMW Oil Cooler Mounting Hardware Genuine BMW Oil Drain Plug Gasket Elring Intake Manifold Gaskets Elring Throttle Body Gasket Bav Auto Transmission Fill Plug (For Automatic models) Genuine BMW Installation Hardware Not included in this kit are the fluids that will need to be replaced or topped off after the installation of your new oil filter housing, including engine oil, G48 or HT-12 coolant (depending on what your BMW came with from the factory), and automatic transmission fluid for models with the ZF 8HP transmission.

Show More Show Less

S55 Oil Pan & Pump Kit - N55 Upgrade

T#:20023486

Part#: 11137854463KT

Ships in 4 Business Days

$ 3,524.99 USD

Add to Wish List

Qty

$ 3,524.99 USD

Add to Wish List

One major drawback of the N55 engine is the oil pump and pan design. While great for street driven vehicles, this design falls short when tracking your BMW. Due to the design of the N55 oil pan and pump, higher G-loads experienced when cornering can lead to oil starvation and pressure drop, potentially leading to bearing damage and more. By upgrading to the S55 oil pan and pump design that BMW utilizes in both their standard M4 and Motorsport M4 GT4 models, you can prevent the possibility of oil starvation! The dual pump design used on the S55 engine installs onto the N55 engine easily and without the need for any major modification to the stock block or windage tray. Thanks to the addition of a scavenging pump, oil pressure and delivery are maintained under all aggressive driving conditions, even when the oil supply is not consistent from the main oil pump.

Show More Show Less

Upgraded Oil Pump Shaft & Installation Kit

T#:27372104

Part#: 11AMUOPSK-M54KT2

In Stock

$ 427.99

This product was last offered at the strikethrough price on
05-15-2026

$ 412.99 USD

Add to Wish List

Qty

$ 412.99 USD

Add to Wish List

Experience peace of mind with Achilles Motorsports' upgraded oil pump shaft kit, designed specifically to address the well-known harmonics-related issues plaguing the M54 engine. Say goodbye to worries about oil pump shaft failures causing sudden oil pressure drops.

Achilles Motorsports goes above and beyond, crafting their oil pump shafts from the toughest materials and subjecting them to rigorous heat treatment processes for maximum strength. The core of this kit features a hardened Chromoly shaft, precision centerless ground to ensure absolute accuracy. What sets this kit apart is its exclusive square key lock system, preventing gear slippage and reinforcing the gear mounting area for added durability.

No more concerns about the oil pump nut coming loose—Achilles Motorsports has replaced it with an extended-length bolt, EDM drilled for safety wire, ensuring a secure fit in all conditions. Avoid costly engine repairs due to oil pump failures by taking proactive measures with this comprehensive upgrade kit.

This kit, curated by the team at Turner Motorsport, includes everything you need for a complete upgrade:

Achilles Motorsports Upgraded Oil Pump Shaft Liqui Moly Molygen 5w-40 Oil (6 liters) Hengst Oil Filter Oil Drain Plug and Reminder Sticker Elring Oil Pan Gasket IWIS Oil Pump Chain Upgrade your M52TU/M54 engine and shield it from potential catastrophic failure with this meticulously crafted upgrade kit from ECS Tuning.

Show More Show Less

URO Premium Aluminum Oil Filter Housing And Cooler Assembly Upgrade K...

2X Entries For Our G87 M2 Sweepstakes!

T#:43750252

Part#: 11428507697PRMK

Ships in 2 Business Days

$ 604.99 USD

Add to Wish List

Qty

$ 604.99 USD

Add to Wish List

If you have noticed a mixture of coolant and oil, have consistently suffered from unexplained coolant loss, or if your BMW's engine has higher mileage, there is a good chance that your factory plastic oil filter housing has cracked and/or failed. This Aluminum URO oil filter housing and cooler is a complete replacement of your factory unit, which eliminates the possibility of failure due to weak materials.

Show More Show Less

Oil Drain Plug

T#:41188174

Part#: 11137535106TKT

In Stock

Sale - Save 29% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Qty

Sale - Save 29%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Includes a one time use crush washer.

Oil Filter Cap With Gasket - Metal

2X Entries For Our G87 M2 Sweepstakes!

T#:39059280

Part#: 11427557011-PRM

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Upgraded to metal vs the stock plastic

Oil Filter Housing Gasket Replacement Kit - BMW Gen1 and Gen2 B58 3.0...

T#:27871828

Part#: 11428583896TKT

In Stock at Vendor

$ 140.03 USD

Add to Wish List

Qty

$ 140.03 USD

Add to Wish List

One unfortunate problem BMW failed to address with the B58 engines is leaking oil filter housing gaskets. If your oil filter housing gaskets are leaking, you will notice a slow oil loss, pooling oil under your vehicle, and oil running down the left rear side of your engine block and on the side of your oil pan. This kit includes all-new gaskets to re-seal your filter housing plus Liqui-Moly oil and a new Hengst filter to get your car back up and running and leak-free!

Show More Show Less

Elring Oil Pan Gasket And CRP Hardware Set

T#:56218592

Part#: 1137548031ELRKT2

In Stock

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.

Turbo Oil Feed Line Kit - E70 M57 3.0L

T#:51883690

Part#: 11427808153KT

Ships in 1-2 days

$ 412.99 USD

Add to Wish List

Qty

$ 412.99 USD

Add to Wish List

The oil feed lines for the M57's turbochargers are known to leak as they age, especially the J Line at the top of the engine due to its tight bend. This kit includes all three replacement oil feed lines, plus the banjo bolts and sealing washers needed to install them.

Show More Show Less

Bapmic Engine Oil Pan - xDrive - BMW G01 G02 G2X G42 G45 G30 G60 B48 ...

T#:53608840

Part#: 11138580124

In Stock at Vendor

$ 469.99 USD

Add to Wish List

Qty

$ 469.99 USD

Add to Wish List

Oil pans sit low and can take some abuse, especially on lowered cars, making them among the most commonly damaged components beneath your BMW. A cracked or bent pan isn’t something to gamble with when engine lubrication is at stake. This pan is built to OEM specifications for proper fit, sealing, and long-term durability. It’s a direct replacement designed to bolt in just like the factory unit, making it an ideal solution when road debris or speed bumps strike first.

Show More Show Less

Oil Pan Gasket - Upper - E30 M3

T#:337964

Part#: 11131727974

In Stock at Vendor

Starting at $ 12.99 USD

Add to Wish List

Starting at $ 12.99 USD

Add to Wish List

E30 M3 Upper Oil-Pan Gasket. Have a leaky oil pan? It may be failed oil pan gaskets (either upper or lower). This is the UPPER oil pan gasket for the S14 and M10 engines. We offer this gasket in both cork and paper gasket media.

Show More Show Less

HJS Oil Filter Housing Mount - E39

T#:556831

Part#: 11421407441

Ships on Aug 10, 2026

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

2 required per car

Engine Oil Filter Housing Replacement Kit

T#:48780829

Part#: F3XAMOFHKT

Back Ordered

Sale - Save 8% $ 296.99

This product was last offered at the strikethrough price on
05-03-2026

$ 273.95 USD

Add to Wish List

Qty

Sale - Save 8%

$ 296.99

This product was last offered at the strikethrough price on
05-03-2026

$ 273.95 USD

Add to Wish List

Engine oil filter housing replacement kit. By replacing the factory plastic oil filter housing, you can prevent future cracks and leaks in your engine oil assembly.

Low-Temperature N54 Oil Thermostat Overhaul Kit

For 2008+ models only

T#:26705034

Part#: 090743ECS09KT2

Back Ordered

Sale - Save 10% $ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 224.54 USD

Add to Wish List

Qty

Sale - Save 10%

$ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 224.54 USD

Add to Wish List

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less

Low-Temperature N54 Oil Thermostat Overhaul Kit

For 2006-2007 models only

T#:26705005

Part#: 090766ECS09KT2

Back Ordered

Sale - Save 10% $ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.14 USD

Add to Wish List

Qty

Sale - Save 10%

$ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.14 USD

Add to Wish List

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results