Oiling System

This is a replacement set of bolts for the oil pan on your BMW equipped with an M54, N52, N54, or N55. The stock bolts are easy to strip, break, or even lose. Replace your missing or damaged bolts with all new hardware from OEM Rein to ensure a tight seal all around your oil pan and prevent oil leaks.

Check fitment with our guide above to ensure these are the oil pan bolts required for your vehicle.

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice. 

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

• 1x Aluminum Crank Bolt Capture
• 8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54 

The Engine Oil Filter Housing Cap CPL0070 is a vital component for BMW vehicles, designed to provide a secure and effective seal for the engine oil filter housing. This high-quality cap is essential for maintaining optimal engine performance by preventing oil leaks and ensuring proper oil pressure. Perfect for both professional mechanics and DIY enthusiasts, the Engine Oil Filter Housing Cap CPL0070 is an indispensable part of routine maintenance for BMW owners focused on vehicle longevity.

Crafted from durable materials, this oil filter housing cap is engineered to withstand the demanding conditions typical of BMW engines. Its precise design guarantees an excellent fit, allowing for easy installation and straightforward replacements. Available from Turner Motorsport, this product is a reliable choice for those looking to enhance their engine’s performance.

Key Benefits:

• Specifically designed for BMW vehicles to ensure compatibility and a perfect fit
• Prevents oil leaks, helping maintain optimal oil pressure for engine health
• Made from high-quality materials for enhanced durability and longevity
• Easy installation process allows for quick maintenance and replacements
• Ideal for both professional mechanics and DIY car enthusiasts
• Available from Turner Motorsport, a trusted supplier of BMW parts

The Engine Oil Filter Housing Cap CPL0070 is an essential upgrade for any BMW owner aiming to protect their engine and ensure it runs smoothly.

Experience peace of mind with Achilles Motorsports' upgraded oil pump shaft kit, designed specifically to address the well-known harmonics-related issues plaguing the M54 engine. Say goodbye to worries about oil pump shaft failures causing sudden oil pressure drops.

Achilles Motorsports goes above and beyond, crafting their oil pump shafts from the toughest materials and subjecting them to rigorous heat treatment processes for maximum strength. The core of this kit features a hardened Chromoly shaft, precision centerless ground to ensure absolute accuracy. What sets this kit apart is its exclusive square key lock system, preventing gear slippage and reinforcing the gear mounting area for added durability.

No more concerns about the oil pump nut coming loose—Achilles Motorsports has replaced it with an extended-length bolt, EDM drilled for safety wire, ensuring a secure fit in all conditions. Avoid costly engine repairs due to oil pump failures by taking proactive measures with this comprehensive upgrade kit.

This kit, curated by the team at Turner Motorsport, includes everything you need for a complete upgrade:

Achilles Motorsports Upgraded Oil Pump Shaft Liqui Moly Molygen 5w-40 Oil (6 liters) Hengst Oil Filter Oil Drain Plug and Reminder Sticker Elring Oil Pan Gasket IWIS Oil Pump Chain Upgrade your M52TU/M54 engine and shield it from potential catastrophic failure with this meticulously crafted upgrade kit from ECS Tuning.

Rein Oil Filter Cap - Plastic CPL0069 is an essential component for BMW vehicles, specifically designed to ensure a secure and effective seal for the oil filter housing. This high-quality plastic cap plays a crucial role in maintaining optimal engine performance by preventing oil leaks and preserving the correct oil pressure. Ideal for both professional mechanics and DIY enthusiasts, the Rein Oil Filter Cap - Plastic CPL0069 is a vital part of regular maintenance for any BMW owner committed to vehicle longevity.

Constructed from durable plastic, this oil filter cap is engineered to withstand the high temperatures and pressures typical in BMW engines. Its precision design ensures an excellent fit, allowing for easy installation and hassle-free replacements. Available from Turner Motorsport, this product exemplifies reliability and performance for BMW enthusiasts.

Key Benefits:

• Specifically designed for BMW vehicles to ensure a perfect fit and compatibility
• Prevents oil leaks, maintaining optimal oil pressure for engine efficiency
• Made from high-quality plastic to withstand harsh engine conditions
• Easy installation process for quick maintenance and replacements
• Ideal for both professional mechanics and DIY car enthusiasts
• Available from Turner Motorsport, a trusted source for BMW parts

The Rein Oil Filter Cap - Plastic CPL0069 is a must-have for BMW owners looking to enhance their vehicle's reliability and efficiency while protecting the engine from potential damage.