BMW Sway Bar Kits

This Genuine BMW sway bar taken from the 540i Individual series is the perfect option to increase ride control and reduce body roll, thanks to its larger 25mm diameter, while keeping OE reliability.

Required for installation:

• 31352226334 - Sway Bar Bushings

Fits the following BMW Chassis:
E34 Non-M

This rear sway bar is the perfect upgrade for your Non-M E39 BMW. Taken from the M5, this sway bar features a larger 16.5mm diameter for increased stiffness and reduced body roll.

Required M5 parts for Non-M installation:

• 31351090548  - Sway Bar Bracket (x2)
• 33551095532 - Rubber Bushings 16.5mm (x2)

Genuine BMW Stabilizer, Rear - D=16,5mm
This item fits the following BMW Chassis:
E39 M5,E39

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. Meyle HD sway bar links are the perfect option to restore body control and eliminate knocking noises.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Features:

• 4 Year Warranty

• All metal ball joints are more reliable and longer lasting than stock

• Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

Fits the following BMWs:
2000-2006 E46 BMW 325xi 330xi

If your ///M is clunking or feels sloppy over bumps, front end links are a good place to start. Refreshing your front end links will help bring your vehicle back to stock performance spec. Turner Motorsport recommends replacing both left and right front end links - if one is worn or broken, it is likely that the other side is not very far behind.

Genuine BMW End Link, Front, Right -
This item fits the following BMW Chassis:
E82 E88 E90 E91 E92 E93 E84 E89

Looking to upgrade your sway bars for increased handling and control? These M5 sway bars will give you just that without sacrificing ride comfort or reliability.

Includes:

• Genuine BMW Front M5 29mm front Sway Bar
• Front Bushings
• Front Brackets
• Genuine BMW 6 Series 16mm rear Sway Bar
• Rear sway bar bushings

Fits the following BMWs:
F10 BMW 528i 535i/ix 550i/ix

Looking to replace your M5 rear sway bar or upgrade your RWD Non-M vehicle's handling? This Genuine BMW 18mm sway bar is the perfect option for increased stiffness and reliability and reduced body roll.

Genuine BMW Stabilizer, Rear - D=18mm
This item fits the following BMW Chassis:
E60 M5 
E60 RWD Non-M - Without Dynamic Drive

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left- and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 175mm (6.89") to 235mm (9.25") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints (M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability NOTE: If you've modified your vehicle's suspension with aftermarket struts or coilovers, the mounting location for the sway bar end link may have moved. To confirm fitment with our adjustable end links, please measure the distance between the sway bar and the mounting location on the strut body with the vehicle at ride height and confirm that it is within the 175 - 235mm range of adjustment.