Schwaben BMW Tools & Specialty Equipment

This great Schwaben kit is designed to work on todays modern cars. Set contains popular torx and triple square bits found on a lot of German and other European cars. Designed to operate in minimal space situations.

Set Contains:

• 6 stubby triple square with 12 mm hex to be used with included 12 mm ratcheting wrench. 4 mm, 5 mm, 6 mm, 8 mm and 10 mm. 
• 4 stubby triple square with 19 mm hex to be used with included 19 mm ratcheting wrench.. 12 mm regular and  14 mm, 16 mm and 18mm tamper proof triple square.
• Set also includes a 3/8" drive 12 mm socket and 1/2" drive 19 mm socket to fit bits. Good for using bit with ratchet or torque wrench.
• 9 torx bits 10 to 70 torx 
• Includes blow molded case with sturdy foam insert to keep every thing in order.

Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Features:

• Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners 
• Large grips add comfort and leverage
• Handle through-holes make them easy to hang from pegboard hooks
• Entire kit packaged in a convenient molded case.
• Sizes include: T10, T15, T20, T25, T27, and T30.

BMW essentials from drivetrain work to fluid changes.

Features:

• 36mm 12-point deep socket, 1/2" drive - Used on axle nuts and most BMW oil filter housing nuts
• 30mm 12-point deep socket, 1/2" drive - Used on driveshaft and pinion mounting, rear wheel bearing removal and reinstallation on many BMWs
• 27mm 6-point socket, 1/2" drive - Fits N52/54 oil filter housing nuts and other various places on most BMWs
• 14/17mm service wrench - Versatile wrench features an open end and a hex head driver that fit most BMW transmission fill/drain plugs. Perfect for engine and transmission oil drains.
• M18 triple square extended reach socket, 1/2" drive - Used to remove axles and other various driveline components.
• All of the sockets included in this kit are built with extreme durability and versatility in mind, and can be used with breaker bars and impact guns.

If you're refreshing your struts and springs this tool is a must, properly compress the springs, easily remove and install the strut nut, and smoothly remove the spindles.

Features:

• Spring Compressor
• Strut Nut Sockets
• Spindle Spreader

When owning a car there is almost no level of pride to a true enthusiast than seeing your craftsmanship shine after a long desired project has been finished. Schwaben would like to help all of our fellow enthusiast get a good start by beginning with the right tools. 

Features:

*3/8" Drive ratchet

*3/8" Long flex head drive ratchet

*External Torx socket set

*12pc Metric Socket Set

*4pc Swivel head triple square socket set

*12pc Combination wrench set

*Schwaben 46pc 1/4" drive set

Your car doesn't just have to be sitting for the season in storage to need a memory saver, sometimes just having the car up for the week could cause the battery to drain. Don't waste time sitting and resetting all of your electronics once you get your car back together, get out there and drive, let the memory saver lock in your settings.

Features: 

• Avoid loss of memory during car battery replacement

• Works with most cars with OBDII 1996 and latter

• Comes with two power leads, one hooks to a 9 volt battery (9 volt battery not included), or use the other 82" long lead that can be clamped to any 12 volt battery or power source.

• Polarity Protection, LED Power Indicators identify connection status and low battery power indicator.

The Schwaben Magnetic Camber Gauge measures the Camber angle on the wheel hub or brake disc and allows on-car adjustment to ensure correct wheel alignment. This is a useful tool for setting Camber angles back to pre repair setting after dismantling and re-assembling of the suspension or struts and is an ideal track day companion.

Features:

• Easy to use magnetic gauge attaches to the hub or brake rotor
• Graduations of +/- 6 degrees 
• Comes supplied in a durable storage case
• Measurements are 5" long with a 2" magnetic base

Doing mechanical work, especially when it come to aluminum heads and engine blocks. The constant change in temperature from hot to cold with and engine may cause fasteners to be more difficult to remove and possibly stripping the threads. This tool wasn't designed to make new thread, but instead clean-up the damaged threads.

Features:

• Repairs both internal and external threads
• Used with standard metric sockets and wrenches
• Tap and Die sizes: 6x1.0 / 8x1.25 / 10x1.25 / 10x1.50 / 12x1.25 / 12x1.75 / 12x1.5 mm
• File thread pitch sizes: 0.75 / 1.00 / 1.25 / 1.50 /  1.75 / 2.00 / 2.50 / 3.00 mm

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

• ½-inch drive 36mm 12-point socket
• 75mm depth  to accommodate many applications and different length shafts
• Made of durable chrome vanadium steel

The Schwaben Pistol Grip Locking Pliers, a unique pistol style that is ideal in locations that do not allow the use of regular locking pliers.

Features:

• The hammer-like lock release is easily pressed in tight locations giving maximum usability to the user
• Durable, rubberized grip covers provide a comfortable, non-slip grip to ensure your hands have a solid hold at all times
• Quickly and easily adjust the gate of the jaws for a secure clamp with the easy to use barrel adjuster

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material

The Schwaben BMW Balance Shaft Alignment Tool is a specialized engine timing solution required for the correct installation and synchronization of balance shafts. This combination tool is engineered to support N47, B47, and B48 engine platforms, consolidating the functions of multiple OEM tools into a single, high-precision unit.

Using this tool ensures that the balance shafts are locked in the exact timed position during engine rebuilds or repairs, preventing engine vibrations and potential internal damage caused by improper alignment.

FEATURES

Multi-Engine Compatibility - A versatile all-in-one tool designed for BMW N47 diesel engines as well as the newer B47 (Diesel) and B48 (Gasoline) modular engines. OEM Equivalent Performance - Replaces and performs the functions of factory tool codes 11 8 750, 11 8 790, and 2 288 054. Precision Alignment - Locks the balance shafts securely, allowing you to set timing accurately without the risk of the shafts shifting during assembly. Streamlined Workflow - Engineered as a combination tool to handle both older and newer style balance shaft configurations, reducing the number of individual specialty tools needed in your kit. WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

• ½-inch drive 30mm 12-point socket
• Specially hardened to take the added abuse from a impact gun
• Coated for added protection and so you can tell it apart from non impact rated sockets
• 75mm depth  to accommodate many applications and different length shafts
• Made of durable chrome moly steel

Schwaben Professional Mechanic's Work Gloves provide exceptional hand protection with a perfect balance of durability and comfort.

Designed for precision, these gloves offer high dexterity, making it easy to handle even the smallest parts. The tailored elastic cuff with a hook-and-loop closure ensures a secure and comfortable fit.

The textured latex coating on the palm and fingertips delivers superior grip and tactile feedback, while the breathable spandex backing and knit top allow for all-day comfort.

The durable synthetic leather palm enhances longevity, and the unique graphic design reflects the drifting culture of Euro car enthusiasts.

Note: See manufacturers information tab for sizing chart.

Key Features:

• High Dexterity: Perfect for picking up small parts with ease.
• Secure Fit: Tailored elastic cuff with a hook-and-loop closure.
• Enhanced Grip: Textured latex coating on palm and fingertips.
• All-Day Comfort: Breathable spandex backing and knit top.
• Durable Design: Synthetic leather palm for extended wear.
• Unique Style: Graphic design inspired by the drifting culture of Euro owners.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Schwaben 3/8" Drive 6 Point Deep Socket Set comprises a dozen 3/8" deep metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 76mm, these sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 3/8" Drive 6 Point Deep Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 76mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm