Find Parts That Fit Your Vehicle

Packaged by Turner BMW Drive Belts & V-Belts

Your BMW's drive belts are wear items, and will degrade and crack over time. Don't wait until you have a belt failure... don't get stranded! Replacing your BMW's belts, such as the alternator belt, power steering belt, air conditioning AC belt, or serpentine belt is a low cost insurance policy to preventing a break down -- or worse, engine damage. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones.

While also inspecting your serpentine belts, also check for wear or resistance in the pulleys. The tensioner pulley and deflection pulley are the primary sources for belt squealing. The rubber-isolated pulleys can also break apart, leading to total belt failure. We sell the tensioner and deflection pulleys for the M50 engine family used in the E34, E36, E39, E46, X5, Z3, and Z4.

Sub-Categories

Sort By:
OEM Accessory Belt Service Kit - E90 335d
OEM Accessory Belt Service Kit - E90 335d
Packaged by Turner - Corporate Logo
T#:554452
Part#: 335DACCKT
Ships in 6 Business Days
$ 232.09 USD
Free Shipping
Add to Wish List
$ 232.09 USD
Free Shipping
Add to Wish List
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.
Show More Show Less
Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90 335d
Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90...
Packaged by Turner - Corporate Logo
T#:27672135
Part#: 11238511371TKT7
Ships in 2 Business Days
$ 751.37 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 751.37 USD
Free Shipping on orders $49 and up
Add to Wish List
The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further
Show More Show Less
Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90 335d
Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90 33...
Packaged by Turner - Corporate Logo
T#:27672136
Part#: 11238511371TKT8
Ships in 2 Business Days
$ 561.99

This product was last offered at the strikethrough price on
05-03-2026

$ 559.34 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 559.34 USD
Free Shipping on orders $49 and up
Add to Wish List
The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This basic kit includes the components necessary to replace your damper with an OEM damper from Corteco, including two belts and the Corteco Vibration Damper pulley. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further
Show More Show Less
Ultimate Timing Belt Kit - Level 2
Ultimate Timing Belt Kit - Level 2
Packaged by Turner - Corporate Logo
T#:15710771
Part#: M20_11-KT
Ships in 9 Business Days
Sale - Save 7% $ 226.99

This product was last offered at the strikethrough price on
04-16-2026

$ 210.91 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 7%
$ 226.99

This product was last offered at the strikethrough price on
04-16-2026

$ 210.91 USD
Free Shipping on orders $49 and up
Add to Wish List
Often overlooked, your timing belt is a crucial component that requires replacement every 60,000 miles. It is common for an unserviced timing belt to snap without warning, leaving you with bent valves and costly repairs. Included in this kit are the following: Timing Belt Tensioner Tensioner Spring and Bolt Water Pump & Gasket Thermostat & Gasket Camshaft Seal 1 Liter of Coolant Radiator Drain Plug For vehicles with production date from 09/1987.
Show More Show Less
Performance Accessory Belt Service Kit - E36 S50 M50
Performance Accessory Belt Service Kit - E36 S50 M50
Packaged by Turner - Corporate Logo
T#:30430686
Part#: 11281703943KT3
Ships on Nov 12, 2026
Sale - Save 8% $ 267.99

This product was last offered at the strikethrough price on
05-03-2026

$ 246.54 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 8%
$ 267.99

This product was last offered at the strikethrough price on
05-03-2026

$ 246.54 USD
Free Shipping on orders $49 and up
Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

To solve this issue, the enthusiasts at Turner Motorsport assembled this kit with high-quality components. Furthermore, an ECS Tuning High-Performance Kevlar-reinforced accessory belt is included for boosting both engine bay aesthetics and reliability.

Show More Show Less
Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E39 540i, E38 740i (up to 09/1998)
Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E39 540i, E38 ...
Packaged by Turner - Corporate Logo
T#:23416510
Part#: 11287833264T2KT
Back Ordered
Sale - Save 17% $ 755.99

This product was last offered at the strikethrough price on
05-03-2026

$ 626.02 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 17%
$ 755.99

This product was last offered at the strikethrough price on
05-03-2026

$ 626.02 USD
Free Shipping on orders $49 and up
Add to Wish List
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes ECS Kevlar Reinforced Drive Belts, tensioners, and pulleys required to install the new tensioner. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Special Offers

Shipping