BMW Drive Belts & V-Belts

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N55 F-Chas...

10X Entries Into Our F80 M3 Sweepstakes

T#:22097553

Part#: 11287628661TKT

Ships on Feb 23, 2027

Sale - Save 23% $ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD

Add to Wish List

Qty

Sale - Save 23%

$ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - F3X F22/23 N55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:587391

Part#: 11287628661ABKT

In Stock

$ 171.99

This product was last offered at the strikethrough price on
06-09-2026

$ 153.99 USD

Add to Wish List

Qty

$ 153.99 USD

Add to Wish List

This kit includes the basic components recommended to replace when it comes time to swap out your accessory belt.

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

Ships in 1-2 days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

OEM Accessory Belt Service Kit - N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:554448

Part#: N54ACCKT

Ships in 1 Business Day

Sale - Save 5% $ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 187.11 USD

Add to Wish List

Qty

Sale - Save 5%

$ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 187.11 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

OEM Accessory Belt Service Kit - E82/88 E9X N55

10X Entries Into Our F80 M3 Sweepstakes

T#:567679

Part#: 11287582946KT4

Ships in 1-2 days

$ 213.63 USD

Add to Wish List

Qty

$ 213.63 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

Show More Show Less

OEM Accessory Belt Service Kit - N52 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:593693

Part#: N52ABKT

In Stock

Sale - Save 22% $ 135.99

This product was last offered at the strikethrough price on
07-08-2026

$ 105.43 USD

Add to Wish List

Qty

Sale - Save 22%

$ 135.99

This product was last offered at the strikethrough price on
07-08-2026

$ 105.43 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW E82/88 E9X...

10X Entries Into Our F80 M3 Sweepstakes

T#:22163422

Part#: 11287568247TKT

Ships on Nov 12, 2026

Sale - Save 15% $ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - F3X F10 N20 2.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:587390

Part#: 11287594969ABKT

In Stock

Sale - Save 29% $ 89.15

This product was last offered at the strikethrough price on
06-29-2026

$ 62.94 USD

Add to Wish List

Qty

Sale - Save 29%

$ 89.15

This product was last offered at the strikethrough price on
06-29-2026

$ 62.94 USD

Add to Wish List

This kit includes the basic components recommended to replace when it comes time to swap out your accessory belt.

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N52 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:22130432

Part#: 11287530314TKT

In Stock

Sale - Save 18% $ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD

Add to Wish List

Qty

Sale - Save 18%

$ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

VTT Billet Power Steering Pulley - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

N54 AC Delete Accessory Belt Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:26771665

Part#: 7PK1660KT

In Stock

Sale - Save 13% $ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.28 USD

Add to Wish List

Qty

Sale - Save 13%

$ 75.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.28 USD

Add to Wish List

This AC Delete Accessory Belt Kit includes a new idler pulley and a shorter ECS Kevlar belt for deleting your AC compressor. ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F3X F10 N20 2....

10X Entries Into Our F80 M3 Sweepstakes

T#:22097555

Part#: 11287618848TKT

In Stock

Sale - Save 34% $ 106.99

This product was last offered at the strikethrough price on
06-01-2026

$ 70.48 USD

Add to Wish List

Qty

Sale - Save 34%

$ 106.99

This product was last offered at the strikethrough price on
06-01-2026

$ 70.48 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt and an OEM tensioner assembly. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the tensioner and upgrading your accessory belt is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Rein Water Pump Pulley - E39, E46, E53, E60, E83, Z3, Z4

2X Entries Into Our F80 M3 Sweepstakes

T#:591711

Part#: 11511436590

In Stock

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

A common failing piece due to the plastic design.

Rein Water Pump Pulley - E34, E36, E39, Z3

2X Entries Into Our F80 M3 Sweepstakes

T#:591716

Part#: 11511730554

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Located behind the fan blade, fan clutch bolts to this pulley

Rein Power Steering Pulley E88 135i, E90 335i/335xi, E84 X1 35i xDriv...

2X Entries Into Our F80 M3 Sweepstakes

T#:34147755

Part#: 32427582947

In Stock at Vendor

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

Power Steering Pulley is a vital component in your BMW’s power steering system, designed to maintain smooth and responsive steering performance. Available from Turner Motorsport, this high-quality pulley ensures the efficient operation of your power steering pump by providing optimal belt tension and reducing wear. Built to OEM specifications, the Power Steering Pulley is a direct-fit replacement, making installation easy and hassle-free for BMW owners and mechanics alike.

Made from durable materials, this pulley is designed to withstand the rigors of daily driving, offering long-lasting performance and reliability. It’s the perfect solution for those looking to restore or maintain the functionality of their BMW’s power steering system.

Key Benefits:

Ensures smooth and efficient power steering operation
Direct OEM fit for easy installation
Reduces wear on the power steering belt and pump
Made from durable materials for long-lasting performance
Available from Turner Motorsport, a trusted source for BMW parts

This Power Steering Pulley is an essential part for maintaining the functionality and reliability of your BMW’s power steering system.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F07/10 F06/12/...

10X Entries Into Our F80 M3 Sweepstakes

T#:23482929

Part#: 8PK1478TKT

Ships on Nov 12, 2026

Sale - Save 23% $ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.72 USD

Add to Wish List

Qty

Sale - Save 23%

$ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.72 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and new pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F8X S55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:22163426

Part#: 11287848605TKT

Ships on Nov 12, 2026

$ 414.99

This product was last offered at the strikethrough price on
08-07-2026

$ 385.99 USD

Add to Wish List

Qty

$ 385.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes ECS Kevlar Reinforced Drive Belts, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - E30 M20

10X Entries Into Our F80 M3 Sweepstakes

T#:554430

Part#: 64521706826KT1

Ships on Oct 28, 2026

$ 202.67 USD

Add to Wish List

Qty

$ 202.67 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
1984-1991 E30 BWM 325, 325i/is/ix, 325e/es

Show More Show Less

Accessory Belt Service Kit - E39 E46 M54 (2002+)

10X Entries Into Our F80 M3 Sweepstakes

T#:401685

Part#: 11287512762KT3

Back Ordered

Sale - Save 5% $ 228.99

This product was last offered at the strikethrough price on
06-23-2026

$ 217.54 USD

Add to Wish List

Qty

Sale - Save 5%

$ 228.99

This product was last offered at the strikethrough price on
06-23-2026

$ 217.54 USD

Add to Wish List

This kit covers many of the common wear items that should be changed any time the serpentine belt is being replaced. As these cars gain years and mileage the belt tensioners will also need to be replaced along with the actual belts. It won't do any good to replace the belt if the tensioners are worn. This kit will save you time and money over buying these pieces individually. This kit includes an updated hydraulic alternator tensioner for added reliability and longevity.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F22/23 F3X B58...

10X Entries Into Our F80 M3 Sweepstakes

T#:22097533

Part#: 11288613707TKT

Ships on Nov 12, 2026

Sale - Save 24% $ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Qty

Sale - Save 24%

$ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and the hardware required to install the new tensioner. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Performance Accessory Belt Kit - Kevlar Reinforced - BMW B46TU/B48TU...

10X Entries Into Our F80 M3 Sweepstakes

T#:29798952

Part#: 11288650740T1KT

Ships on Nov 12, 2026

Sale - Save 24% $ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Qty

Sale - Save 24%

$ 137.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.35 USD

Add to Wish List

Having your accessory belt fail is a major inconvenience and can leave you on the side of the road if the alternator isn't charging and the mechanical water pump isn't turning. Over time the tensioner and the belt itself wears out and will eventually fail. This kit includes everything you need to service the belt drive system and keep everything in check. Included: ECS Tuning Kevlar Reinforced Performance Accessory Belt - Designed to resist OEM Febi Belt Tensioner Genuine BMW Tensioner Hardware

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW E82/88 E9X...

10X Entries Into Our F80 M3 Sweepstakes

T#:22163417

Part#: 11287582946TKT

Ships on Nov 12, 2026

Sale - Save 5% $ 223.99

This product was last offered at the strikethrough price on
09-16-2026

$ 212.39 USD

Add to Wish List

Qty

Sale - Save 5%

$ 223.99

This product was last offered at the strikethrough price on
09-16-2026

$ 212.39 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, belt tensioner, and idler pullies. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - BMW F8X S55

10X Entries Into Our F80 M3 Sweepstakes

T#:589853

Part#: PBTABF8XS55KT

Ships on Oct 12, 2026

$ 433.99

This product was last offered at the strikethrough price on
07-07-2026

$ 412.99 USD

Add to Wish List

Qty

$ 412.99 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

S54 Turner Motorsport Ultimate Power Pulley And Drive Belt Overhaul S...

10X Entries Into Our F80 M3 Sweepstakes

T#:15710772

Part#: 11281730349-KT

Back Ordered

Sale - Save 1% $ 499.99

This product was last offered at the strikethrough price on
05-03-2026

$ 494.69 USD

Add to Wish List

Qty

Sale - Save 1%

$ 499.99

This product was last offered at the strikethrough price on
05-03-2026

$ 494.69 USD

Add to Wish List

The idea of power pulleys is simple. The less effort the engine puts into running accessories such as the water pump, power steering, pump alternator etc., the more of that power can be used elsewhere - your wheels! The way this is done by reducing the rotation of the pulleys by as much as 10-20%! The end result is more horsepower at your disposal. Turner has done extensive testing (on and off the track), to ensure that the accessory systems still function as intended and without failure. These pulleys offer an excellent compromise of power gains, reliability and performance. All Turner pulleys are constructed of high quality T-6061 aluminum for durability and longevity. They are also finished in a black hard anodizing, which is highly resistant to wear including chemical and heat exposure. They have been designed to carry stock-like aesthetics, but with increased strength properties and lighter weight. Because of the durable aluminum construction, you can also put the worries of a serious plastic failure to rest. These pulleys will last, all the while increasing horsepower too! While you're installing your Power Pulley Kit, it makes sense to overhaul your Accessory Belt System as well, so this kit includes our Accessory Belt Kit as well.

Show More Show Less

N54 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N54 3.0...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241396

Part#: TMSN54BPKT

Back Ordered

$ 565.99

This product was last offered at the strikethrough price on
09-29-2026

$ 564.99 USD

Add to Wish List

Qty

$ 564.99 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#558924

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E36 Z3 M52 S52...

10X Entries Into Our F80 M3 Sweepstakes

T#:22130428

Part#: 11281437929TKT

Back Ordered

Sale - Save 8% $ 264.99

This product was last offered at the strikethrough price on
05-03-2026

$ 244.54 USD

Add to Wish List

Qty

Sale - Save 8%

$ 264.99

This product was last offered at the strikethrough price on
05-03-2026

$ 244.54 USD

Add to Wish List

Eliminate your squeaking accessory belt pulleys and cracked drive belts with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, an OEM A/C belt, belt tensioners, an idler pulley, and the hardware required for installation ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the belts, rollers, and tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - E46 E39 E53 M54 (Pre-09/2002) ...

10X Entries Into Our F80 M3 Sweepstakes

T#:554446

Part#: M54ACCKT2

Back Ordered

Sale - Save 5% $ 256.99

This product was last offered at the strikethrough price on
06-23-2026

$ 244.82 USD

Add to Wish List

Qty

Sale - Save 5%

$ 256.99

This product was last offered at the strikethrough price on
06-23-2026

$ 244.82 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
2000-09/2002 E53 BMW X5 M54
2000-09/2002 E39 BMW M54
1999-09/2002 E46 BMW M54

Show More Show Less

Hydraulic Alternator Belt Tensioner Conversion Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710833

Part#: 11287838797-KT

Back Ordered

Sale - Save 1% $ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.64 USD

Add to Wish List

Qty

Sale - Save 1%

$ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.64 USD

Add to Wish List

The original mechanical design is has been discontinued by BMW. So now Turner offers this complete hydraulic tensioner conversion kit for your BMW alternator/water pump/power steering belt. Changes the old style mechanical design to the updated hydraulic design recommended by BMW. Includes the following parts Hydraulic Tensioner Adjusting Pulley Caps & Dust Guards Securing Hardware

Show More Show Less

OEM Accessory Belt Service Kit - E39, E46 M54 (up to 2002)

10X Entries Into Our F80 M3 Sweepstakes

T#:401686

Part#: 11281748131KT2

Back Ordered

Sale - Save 4% $ 272.99

This product was last offered at the strikethrough price on
06-23-2026

$ 260.88 USD

Add to Wish List

Qty

Sale - Save 4%

$ 272.99

This product was last offered at the strikethrough price on
06-23-2026

$ 260.88 USD

Add to Wish List

This kit covers many of the common wear items that should be changed any time the serpentine belt is being replaced. As these cars gain years and mileage the belt tensioners will also need to be replaced along with the actual belts. It won't do any good to replace the belt if the tensioners are worn. This kit will save you time and money over buying these pieces individually. This kit includes an updated hydraulic alternator tensioner for added reliability and longevity.

Show More Show Less

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N55 3.0...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241397

Part#: TMSE90N55BPKT

Ships in 1-2 days

$ 624.99 USD

Add to Wish List

Qty

$ 624.99 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW E60 N54 3....

10X Entries Into Our F80 M3 Sweepstakes

T#:22163416

Part#: 4485241TKT

Ships on Nov 12, 2026

Sale - Save 23% $ 177.99

This product was last offered at the strikethrough price on
05-03-2026

$ 136.47 USD

Add to Wish List

Qty

Sale - Save 23%

$ 177.99

This product was last offered at the strikethrough price on
05-03-2026

$ 136.47 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, belt tensioner, and idler pullies. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Rein Aluminum Power Steering Pump Pulley - E36, E46 , E39, E83, E53, ...

2X Entries Into Our F80 M3 Sweepstakes

T#:53750207

Part#: PKP0124

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Upgrade the Plastic Pulley in Your BMW with an All Aluminum Construction Replacement from Rein

S55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F8X S55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241399

Part#: TMSS55BPKT

Ships on Dec 22, 2026

$ 799.99 USD

Add to Wish List

Qty

$ 799.99 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#585961 and T#599784!

Show More Show Less

BMW E9X M3 Replacement Belt For Underdrive Pulley Kit - (D560-0004) ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:586064

Part#: D561-0002

Ships in 5 Business Days

Sale - Save 10% $ 126.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.26 USD

Add to Wish List

Qty

Sale - Save 10%

$ 126.99

This product was last offered at the strikethrough price on
09-29-2026

$ 114.26 USD

Add to Wish List

BMW E9X M3 Replacement Belt For Underdrive Pulley Kit - (D560-0004) is an essential component designed specifically for the Underdrive Pulley Kit. This belt is one of the two required for optimal performance of the kit.

Designed for Precision: Tailored to fit the BMW E9X M3 Underdrive Pulley Kit perfectly.
High-Quality Construction: Built to withstand the demands of high-performance driving.
Optimal Performance: Ensures smooth operation and reliable power delivery.
Easy Replacement: Simple to install, making maintenance straightforward.

Show More Show Less

Accessory Belt Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744006

Part#: 11281469266KT-KT

Back Ordered

Sale - Save 2% $ 236.99

This product was last offered at the strikethrough price on
06-16-2026

$ 233.22 USD

Add to Wish List

Qty

Sale - Save 2%

$ 236.99

This product was last offered at the strikethrough price on
06-16-2026

$ 233.22 USD

Add to Wish List

Having your accessory belt fail is definitely inconvenient, and can leave you on the side of the road if the alternator isn't charging. Over time the tensioner and the belt itself gets worn and will eventually fail. Turner Motorsport has assembled a convenient kit with this in mind. This kit includes everything you need to service the belt drive system and keep everything in check. This kit includes: Continental accessory belts Ruville A/C belt tensioner URO idler and belt tensioner pulleys LUK hydraulic tensioner assembly Idler pulley securing bolt

Show More Show Less

OEM Accessory Belt Service Kit - F10 F12 F13 F15 F16 F01 F02 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:554454

Part#: N55BMWKT

Ships on Jan 11, 2027

Sale - Save 7% $ 200.99

This product was last offered at the strikethrough price on
06-09-2026

$ 187.58 USD

Add to Wish List

Qty

Sale - Save 7%

$ 200.99

This product was last offered at the strikethrough price on
06-09-2026

$ 187.58 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

For vehicles with dynamic or adaptive drive

Fits the following BMWs:
F01/02 BMW 740i/Li/Li xDrive
F10 BMW 535i/i xDrive
F12/3 BMW 640i/i xDrive
F15 BMW X5 s/xDrive35i
F16 BMW X6 s/xDrive35i

Show More Show Less

Crank Pulley With Dampener

2X Entries Into Our F80 M3 Sweepstakes

T#:38587673

Part#: 11237829906

Back Ordered

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Dinan Underdrive Crankshaft Pulley Kit - E60 M5, E63/64 M6 S85 5.0L ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:21078436

Part#: D560-0001

Ships in 5 Business Days

Sale - Save 10% $ 449.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 404.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 449.99

This product was last offered at the strikethrough price on
09-28-2026

$ 404.96 USD

Add to Wish List

Dinan's lightweight billet aluminum crankshaft pulley underdrives each of the accessories by 13 percent, reducing parasitic drag on the engine for a 6 HP @ 8000 RPM and 4 lb-ft torque @ 8000 RPM gain on a stock vehicle. The Dinan underdrive pulley retains the factory harmonic crankshaft damper, eliminating vibration that might otherwise damage the crankshaft. The kit includes all of the necessary mounting hardware, a lightweight pulley, and shorter belts. This product is backed by our industry-leading 4 year/50,000 mile warranty so you can rest assured that you are purchasing the best quality product for your BMW. Features: All accessories are underdriven by 13% to decrease drag on the engine. Lightweight billet aluminum crankshaft pulley, black anodized and engraved. Includes mounting hardware and shorter belts.

Show More Show Less

OEM Accessory Belt Service Kit - E36 328 M3, Z3 2.8 M Coupe/Roadster ...

10X Entries Into Our F80 M3 Sweepstakes

T#:593717

Part#: M52ABSKT

Back Ordered

$ 241.99 USD

Add to Wish List

Qty

$ 241.99 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

Show More Show Less

Dinan Replacement Underdrive Pulley Belt For D560-0001 - Power Steeri...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:21078443

Part#: D561-0005

Ships in 5 Business Days

Sale - Save 10% $ 63.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.56 USD

Add to Wish List

Qty

Sale - Save 10%

$ 63.99

This product was last offered at the strikethrough price on
09-29-2026

$ 57.56 USD

Add to Wish List

Replacement Belt for Underdrive Pulley Kit (D560-0001). This belt attaches to the power steering and air conditioner.

E9X M3 6/2008+ Dinan Underdrive Pulley Kit

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389532

Part#: D560-0004

Ships in 5 Business Days

Sale - Save 10% $ 449.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 404.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 449.99

This product was last offered at the strikethrough price on
09-28-2026

$ 404.96 USD

Add to Wish List

Dinan Replacement Underdrive Pulley Belt For D560-0001 - Alternator/W...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:21078444

Part#: D561-0006

Ships in 5 Business Days

Sale - Save 10% $ 63.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.56 USD

Add to Wish List

Qty

Sale - Save 10%

$ 63.99

This product was last offered at the strikethrough price on
09-29-2026

$ 57.56 USD

Add to Wish List

Replacement Belt for Underdrive Pulley Kit (D560-0001). This belt drives the alternator and water pump.

Replacement Belt For Underdrive Pulley Kit D560-0003 & D560-0004 ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:586065

Part#: D561-0007

Ships in 5 Business Days

Sale - Save 10% $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.30 USD

Add to Wish List

Qty

Sale - Save 10%

$ 95.99

This product was last offered at the strikethrough price on
09-29-2026

$ 86.30 USD

Add to Wish List

OEM Belt and Tensioner Service Kit for Power Pulley Kit - E9X M3 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:391555

Part#: S65LPPK-BELTKT

Ships in 1-2 days

$ 928.99 USD

Add to Wish List

Qty

$ 928.99 USD

Add to Wish List

We’ve put together the Ultimate Belt & Tensioner Renewal Kit, curated specifically for M3 owners running our Turner E9X M3 Pulley Upgrade. Designed to restore factory fresh mechanical precision while maintaining high performance reliability

Show More Show Less

Water Pump/Alternator Accessory Belt Service Kit w/ Kevlar Reinforced...

10X Entries Into Our F80 M3 Sweepstakes

T#:22097556

Part#: 6PK1548TKT

Ships on Feb 23, 2027

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Accessory Belt, tensioner assembly, and your idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

OEM Accessory Belt Service Kit - E60 M5, E63 E64 M6 S85

10X Entries Into Our F80 M3 Sweepstakes

T#:584180

Part#: 11287838226KT4

Ships in 4 Business Days

$ 908.99

This product was last offered at the strikethrough price on
09-26-2026

$ 902.99 USD

Add to Wish List

Qty

$ 902.99 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW F22/23 F3X N55 3.0...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241398

Part#: TMSF30N55BPKT

Ships on Feb 23, 2027

$ 550.99

This product was last offered at the strikethrough price on
09-29-2026

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate ECS Kevlar reinforced accessory belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E90 335d M57 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:23416570

Part#: 11287792059TKT

Ships in 1-2 days

Sale - Save 6% $ 240.99

This product was last offered at the strikethrough price on
06-01-2026

$ 226.75 USD

Add to Wish List

Qty

Sale - Save 6%

$ 240.99

This product was last offered at the strikethrough price on
06-01-2026

$ 226.75 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E46 M3, Z3M, Z...

10X Entries Into Our F80 M3 Sweepstakes

T#:23482931

Part#: S54KEVACCKT

Back Ordered

Sale - Save 2% $ 333.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.68 USD

Add to Wish List

Qty

Sale - Save 2%

$ 333.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.68 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results