Find Parts That Fit Your Vehicle

BMW Electrical Sensors, Switches, & Relays

Electrical gremlins can be very frustrating. Luckily your BMW's electrical system is better than most, even if it's 25 years old. Here you will find electrical relays, sensors, switches, and modules for the engine, camshaft, and crankshaft. Our parts are OEM, Genuine BMW, or approved aftermarket brands that we have an excellent track record with. There is no middle ground with electrical parts - it either works perfectly or not. And there's nothing more frustrating than a new part that fails right out of the box. So it's important to choose quality replacement parts over a cheap but faulty piece.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:34885402
Part#: 4BAR TMAP
In Stock
$ 139.99 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.
Burger Motorsports - Corporate Logo
T#:599637
Part#: TYPEB4BARADAPTER
Back Ordered
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less
OMP - Corporate Logo
T#:1614
Part#: EA-462
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:599636
Part#: TYPEA4BARADAPTER
Ships in 2 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7593105
Part#: 116177
Ships in 3 Business Days
$ 71.99 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's Oil Pressure Sensor Relocation Kit allows for an aftermarket low pressure switch as well as oil pressure sensor, or two 1/8' NPT pressure sensors to be installed. This can allow a gauge or light to be on the dash and still log oil pressure in a data logger. This kit also moves the oil pressure sensor away from the engine and onto the chassis (or any other spot) where is it much easier to access, or install larger size diameter sensors. Fits all M20 Engines. Features: 4AN Stainless Steel Braided Line Banjo Bolt and Fitting (installs onto block) 3 Way 1/8' NPT Tee Fitting, for hose from block and 2 sensors. Note: This kit does not come with sensors – the factory low pressure switch can NOT be used. An aftermarket 1/8″ NPT low pressure switch can be used with the factory wire.
Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7608844
Part#: 11648
Ships in 3 Business Days
$ 28.99 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. The AAF E46 Jump Post Relocation Bracket makes it easy to adjust camber/caster on your race car by getting the factory jump post out of the way! In race car applications, the desired camber and caster settings can cause the strut tops and shock adjusters to interfere with the factory jump post. This kit takes just a few minutes to install and makes using strut braces and adjusting camber plates just that much safer and faster.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:21012623
Part#: ATK-BM-0420-G87
Ships in 7 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
The boldly styled G87 already touts carbon features but carbon fiber is not very often displayed in the engine bay. If you are looking to give your engine bay some carbon spark, AUTOTECKNIC introduces you to their dry carbon battery terminal cover to beautify your engine bay and bring a smile to your face every time you open the hood of your S58 monster! Made from high-quality carbon, this product is sure to stand the test of time!
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51778112
Part#: N54-USB-SERIAL-H
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Take full control of your N54’s fueling system with the Vargas Turbo Technologies USB to Serial adapter.

Vargas Turbo Technologies - Corporate Logo
T#:51813310
Part#: VTT-FAB-HC
Ships in 10 Business Days
New Item
$ 49.99 USD
Free Shipping
$ 49.99 USD
Free Shipping
Simplify your next fabrication project with the VTT-FAB series Coolant Extension Harness.

Vargas Turbo Technologies - Corporate Logo
T#:51672717
Part#: VTT-MAP-HARNESS
Ships in 10 Business Days
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.
Vargas Turbo Technologies - Corporate Logo
T#:52129729
Part#: VTT56BSENSKIT64
Ships in 10 Business Days
New Item
$ 209.99 USD
Free Shipping
$ 209.99 USD
Free Shipping
The VTT 6-Bar MAP sensor kit provides the necessary overhead to monitor boost levels with a linear voltage scale that makes software calibration straightforward.