BMW Brakes & Brake Parts

These ABS plastic ducts are lightweight and durable and made to fit the E46 M3 front bumper. The rear has a port that allows you to run 3 inch hose to your brakes for extreme cooling needs.

Sold as a pair. Mounting rivets included.

Fits vehicles with the E46 M-Tech front bumper.

The Brake Cooling Backing Plates from HARD Motorsport features a design that creates a pocket that forces cool air directly into the rotor from the hat so that built up up doesn't have time to lead to premature brake failure and wear. For any sporty or track driven vehicle, this is an absolute must have! It is made from lightweight solid aluminum and is power-coated for extra protection and appearance. They are installed into OEM mounting locations using stock hardware.

For use with the HARD Motorsport Complete Brake Cooling Duct Kit

Fits the following vehicles:

E36 BMW M3 and all submodels with an OEM M3 rotor conversion

Dinan's 370x32mm 2-piece 4-piston Big Brake Kit (BBK) is an ultra-high-end solution for maximum stopping power. Each feature-packed solution is specifically tailored to your vehicle and provides exceptional stopping-power in a wide operating range from daily driving to professional racing. Because of this, the system provides the correct brake bias and integrates seemlessly with the ABS and stability systems which is critical under emergency braking situations. This upgrade handily out-brakes, out-lasts, and out-performs any non-vehicle application specific OEM swap kits, and rivals much more expensive top-tier systems. Whereas most systems on the market either make heavy sacrifices to either look fancy, cut weight, or cut costs, the Dinan system is designed to simply brake better, last longer, and stand the test of time!

Features:

4-Piston next-generation weight-savings billet calipers with stainless steel pistons

2-Piece 370x32mm semi-floating discs with 72 curved directional cooling vanes

High-performance street pads (Pre-loaded, standard replacement size)

Braided stainless steel brake lines

Billet caliper mounting brackets

All necessary install hardware

Premium components, machining, and QC throughout

Low noise, vibration, and harshness

Maximum Temperature Recording systems for choosing appropriate pads and fluids

Stops quicker, lasts longer, and is more consistent than stock

Dinan's 370x32mm 2-piece 4-piston Big Brake Kit (BBK) is an ultra-high-end solution for maximum stopping power. Each feature-packed solution is specifically tailored to your vehicle and provides exceptional stopping-power in a wide operating range from daily driving to professional racing. Because of this, the system provides the correct brake bias and integrates seemlessly with the ABS and stability systems which is critical under emergency braking situations. This upgrade handily out-brakes, out-lasts, and out-performs any non-vehicle application specific OEM swap kits, and rivals much more expensive top-tier systems. Whereas most systems on the market either make heavy sacrifices to either look fancy, cut weight, or cut costs, the Dinan system is designed to simply brake better, last longer, and stand the test of time!

Features:

4-Piston next-generation weight-savings billet calipers with stainless steel pistons

2-Piece 370x32mm semi-floating discs with 72 curved directional cooling vanes

High-performance street pads (Pre-loaded, standard replacement size)

Braided stainless steel brake lines

Billet caliper mounting brackets

All necessary install hardware

Premium components, machining, and QC throughout

Low noise, vibration, and harshness

Maximum Temperature Recording systems for choosing appropriate pads and fluids

Stops quicker, lasts longer, and is more consistent than stock

Dinan's 370x32mm 2-piece 4-piston Big Brake Kit (BBK) is an ultra-high-end solution for maximum stopping power. Each feature-packed solution is specifically tailored to your vehicle and provides exceptional stopping-power in a wide operating range from daily driving to professional racing. Because of this, the system provides the correct brake bias and integrates seemlessly with the ABS and stability systems which is critical under emergency braking situations. This upgrade handily out-brakes, out-lasts, and out-performs any non-vehicle application specific OEM swap kits, and rivals much more expensive top-tier systems. Whereas most systems on the market either make heavy sacrifices to either look fancy, cut weight, or cut costs, the Dinan system is designed to simply brake better, last longer, and stand the test of time!

Features:

4-Piston next-generation weight-savings billet calipers with stainless steel pistons

2-Piece 370x32mm semi-floating discs with 72 curved directional cooling vanes

High-performance street pads (Pre-loaded, standard replacement size)

Braided stainless steel brake lines

Billet caliper mounting brackets

All necessary install hardware

Premium components, machining, and QC throughout

Low noise, vibration, and harshness

Maximum Temperature Recording systems for choosing appropriate pads and fluids

Stops quicker, lasts longer, and is more consistent than stock

Dinan's 395x34mm 2-piece 6-piston Big Brake Kit (BBK) is an ultra-high-end solution for maximum stopping power. Each feature-packed solution is specifically tailored to your vehicle and provides exceptional stopping-power in a wide operating range from daily driving to professional racing. Because of this, the system provides the correct brake bias and integrates seemlessly with the ABS and stability systems which is critical under emergency braking situations. This upgrade handily out-brakes, out-lasts, and out-performs any non-vehicle application specific OEM swap kits, and rivals much more expensive top-tier systems. Whereas most systems on the market either make heavy sacrifices to either look fancy, cut weight, or cut costs, the Dinan system is designed to simply brake better, last longer, and stand the test of time!

Features:

6-Piston next-generation weight-savings billet calipers with stainless steel pistons

2-Piece 395x34mm semi-floating discs with 72 curved directional cooling vanes

High-performance street pads (Pre-loaded, standard replacement size)

Braided stainless steel brake lines

Billet caliper mounting brackets

All necessary install hardware

Premium components, machining, and QC throughout

Low noise, vibration, and harshness

Maximum Temperature Recording systems for choosing appropriate pads and fluids

Stops quicker, lasts longer, and is more consistent than stock

Dinan's 395x34mm 2-piece 6-piston Big Brake Kit (BBK) is an ultra-high-end solution for maximum stopping power. Each feature-packed solution is specifically tailored to your vehicle and provides exceptional stopping-power in a wide operating range from daily driving to professional racing. Because of this, the system provides the correct brake bias and integrates seemlessly with the ABS and stability systems which is critical under emergency braking situations. This upgrade handily out-brakes, out-lasts, and out-performs any non-vehicle application specific OEM swap kits, and rivals much more expensive top-tier systems. Whereas most systems on the market either make heavy sacrifices to either look fancy, cut weight, or cut costs, the Dinan system is designed to simply brake better, last longer, and stand the test of time!

Features:

6-Piston next-generation weight-savings billet calipers with stainless steel pistons

2-Piece 395x34mm semi-floating discs with 72 curved directional cooling vanes

High-performance street pads (Pre-loaded, standard replacement size)

Braided stainless steel brake lines

Billet caliper mounting brackets

All necessary install hardware

Premium components, machining, and QC throughout

Low noise, vibration, and harshness

Maximum Temperature Recording systems for choosing appropriate pads and fluids

Stops quicker, lasts longer, and is more consistent than stock