BMW Aero & Body

Aero upgrades are undoubtedly one of the most visually striking enhancements you can make to your vehicle. A carbon fiber front lip, in particular, is a popular choice that instantly elevates the car's appearance, making it stand out from the crowd.

However, this bold aesthetic upgrade has its challenges, especially when navigating uneven roads or steep driveways that can potentially damage the expensive carbon fiber. Luckily, Acexxon offers a solution to safeguard your valuable lip from scratches and more serious damage, allowing you to fully enjoy the upgrade without worries.

The Acexxon kit comprises five 18-inch strips that securely attach to the underside of your lip using pre-installed 3M double-sided tape. Three of these strips feature a smooth end, seamlessly blending with the front lip's leading edge. The remaining two strips are designed with contour flex sections, ensuring a precise fit around the lip's curved contours. Compared to other kits, Acexxon's design minimizes trimming requirements, needing only the trimming of excess material at the lip's ends for a flawless finish.

Key Features:

Includes 5 strips Each strip measures 18" in length and 1.75" in width Thickness of 5.47mm Equipped with pre-installed 3M tape for easy installation

HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping. 

*Does not include mounting support brackets*

This product offers the following:

Solid core, aluminum skinned, composite material

Easily replaceable

Extremely durable and flex resistant at high speeds

Satin Black top finish and unfinished bottom side

This fits the following vehicles:

E36 BMW All

Acexxon's Honeycomb rear reflectors allow you to ditch the unattractive stock rear reflectors on your X5M, giving your vehicle a more sporty look. Goes great with black grilles!

Installation is very single. Pop the old ones out with a pry tool and then pop in your new Acexxon reflectors.

This set of Honeycomb rear reflectors from Acexxon is Gloss Black. If you are looking for matte black Acexxon rear reflectors for your X5M, here is the link.

This product fits the following BMWs:
F85 X5M

HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.  

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Product fits the following vehicles:

E46 BMW Non-M Sedan

The V2 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style plus an additional 20mm in width, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look. 

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Allows fitment of up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.

Product fits the following vehicles:

E36 BMW M3 (And all other e36 coupes with M mouldings)

HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.

Includes mounting support brackets and installation hardware.

This product offers the following:

• Solid core, aluminum skinned, composite material
• Easily replaceable
• Extremely durable and flex resistant at high speeds
• Satin Black top finish and unfinished bottom side

This fits the following vehicles:

E36 BMW All

M7 EXTREME Tegris Front Splitter - GUARANTEED* FOR LIFE!

Introducing the M7 EXTREME Tegris Front Splitter - GUARANTEED* FOR LIFE!

M7 continues its legacy of innovation in Ultimate MINI Performance with the introduction of the first and only indestructible splitter for your MINI...GUARANTEED!

Splitters are prone to damage from road hazards, parking lot bumpers, curbs, or racetrack surfaces. While standard carbon fiber splitters look great and are strong, they're brittle and not designed to withstand the rigors of road threats or racetrack events.

The M7 EXTREME Tegris Front Splitter is crafted from Tegris material, one of the strongest and lightest composite polymers worldwide. Initially developed as lightweight armor shielding for our troops, Tegris has proven its durability on racetracks globally for over 12 years, including use in NASCAR and various endurance and sports car racing events.

Now, you can equip your Mini with this bulletproof material and eliminate worries about wearing or breaking your splitter.

• Impact Resistance: Provides a 10x to 15x improvement in impact resistance compared to typical thermoplastics and thermoplastic composites.
• Weight Reduction: Offers significant weight reduction compared to higher density composite structures.
• Abrasion Resistance: Withstands dragging on the race track without damage, ensuring worry-free racing.
• Easy Mounting: Precision CAD design and CNC cutting ensure a perfect fit to each unique MINI bumper profile. Pre-drilled holes and improved mounting procedures eliminate the need for bumper removal, allowing for easy installation in less than one hour with no special skills or tools required. Each kit includes all mounting hardware and comprehensive installation instructions.

Expertly designed and utilizing the best material and attachment system, the M7 splitter stands out as the best Splitter Kit on the market...PERIOD! We're so confident in the quality of The M7 EXTREME Tegris that each splitter is GUARANTEED* FOR LIFE!

*See M7 Tegris Splitter Warranty for details.

Update: As of Jan 1, 2018, all M7 Splitters will be made from Tegris FS PW material, featuring a gray/silver color with a visible weave pattern.

Acexxon's Honeycomb rear reflectors allow you to ditch the unattractive stock rear reflectors on your M5, giving your vehicle a more sporty look. Goes great with black grilles!

Installation is very single. Pop the old ones out with a pry tool and then pop in your new Acexxon reflectors.

This set of Honeycomb rear reflectors from Acexxon is Matte Black. If you are looking for gloss black Acexxon rear reflectors for your M5, here is the link.

This product fits the following BMWs:

F90 M5