Aero upgrades are undoubtedly one of the most visually striking enhancements you can make to your vehicle. A carbon fiber front lip, in particular, is a popular choice that instantly elevates the car's appearance, making it stand out from the crowd.

However, this bold aesthetic upgrade has its challenges, especially when navigating uneven roads or steep driveways that can potentially damage the expensive carbon fiber. Luckily, Acexxon offers a solution to safeguard your valuable lip from scratches and more serious damage, allowing you to fully enjoy the upgrade without worries.

The Acexxon kit comprises five 18-inch strips that securely attach to the underside of your lip using pre-installed 3M double-sided tape. Three of these strips feature a smooth end, seamlessly blending with the front lip's leading edge. The remaining two strips are designed with contour flex sections, ensuring a precise fit around the lip's curved contours. Compared to other kits, Acexxon's design minimizes trimming requirements, needing only the trimming of excess material at the lip's ends for a flawless finish.

Key Features:

Includes 5 strips Each strip measures 18" in length and 1.75" in width Thickness of 5.47mm Equipped with pre-installed 3M tape for easy installation

HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping. 

*Does not include mounting support brackets*

This product offers the following:

Solid core, aluminum skinned, composite material

Easily replaceable

Extremely durable and flex resistant at high speeds

Satin Black top finish and unfinished bottom side

This fits the following vehicles:

E36 BMW All

Acexxon's Honeycomb rear reflectors allow you to ditch the unattractive stock rear reflectors on your X5M, giving your vehicle a more sporty look. Goes great with black grilles!

Installation is very single. Pop the old ones out with a pry tool and then pop in your new Acexxon reflectors.

This set of Honeycomb rear reflectors from Acexxon is Gloss Black. If you are looking for matte black Acexxon rear reflectors for your X5M, here is the link.

This product fits the following BMWs:
F85 X5M

The V2 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style plus an additional 20mm in width, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look. 

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Allows fitment of up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.

Product fits the following vehicles:

E36 BMW M3 (And all other e36 coupes with M mouldings)

To keep wind drag on the rear end of your E90 335i, HARD Motorsport has developed their lightweight Aluminum Rear Diffuser Kit. It reduces undercar drag, allowing for optimal downforce.

Diffuser is unpainted and does not work with stock exhaust. Straight pipes or custom exhaust work recommended.

Fits the following vehicles:

2006-2013 E90 BMW 335i 

HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.

Includes mounting support brackets and installation hardware.

This product offers the following:

• Solid core, aluminum skinned, composite material
• Easily replaceable
• Extremely durable and flex resistant at high speeds
• Satin Black top finish and unfinished bottom side

This fits the following vehicles:

E46 BMW All w/ M3 Front Bumper

The Akrapovic Evolution and Slip-On line exhaust systems can be further enhanced with an optional hand-crafted carbon-fiber rear diffuser. Developed by Akrapovic’s Design Department, this stunning diffuser, crafted from materials developed through Akrapovic’s racing involvement, is designed to perfectly fit the lines of the unique tailpipes of the Slip-On or Evolution systems, as well as complement the sleek and sporty shape of the F90 M5 BMW.

**High Gloss finish with a red and white Akrapovic logo

This item fits the following BMWs: 
2018+ F90 BMW M5

HARD Motorsport's Motorsport Chassis Mount Wing Upright kit has everything you need to mount a rear wing to your E90 BMW. the brackets mount directly to the chassis making sure that all downforce is applied right where it is needed and not just the upper trunk area, helping to keep the low center of gravity. The upright supports match the original profile of the OEM trunk to keep it looking just as clean as it is functional. All supports are made from sturdy, lightweight aluminum. Includes all needed mounting hardware.

One of the main benefits, in addition to improved handling, is that it keeps the trunk completely functional. It uses a unique lock-pin design that that connects the upper and lower supports without requiring other special brackets or mounting points.

Product fits the following vehicles:

E90 BMW All submodels

Akrapovic Rear Wing Forged Carbon Fiber - G22 G23 G82 G83

The Akrapovic Rear Wing Forged Carbon Fiber - G22 G23 G82 G83 is a premium aerodynamic upgrade designed for BMW M2, M240i, and other compatible models. Crafted from lightweight, handcrafted chopped carbon fibre and finished with a high-gloss lacquer, this rear wing combines striking aesthetics with motorsport-inspired performance. The swan neck design, supported by CNC-machined aluminium brackets, ensures an optimal balance between weight reduction and structural strength. High-grade titanium reinforcements at pivot points enhance durability, while the aerofoil design maximizes downforce and minimizes drag for superior handling. Fully adjustable to three levels, this wing allows drivers to customize their setup for peak performance. ABE approved with KBA 31882 type certification, it is road-legal and features an understated Akrapovič monochrome logo on each side for a refined touch. Optimized using computational fluid dynamics (CFD), this wing ensures minimal air turbulence and noise, making it a perfect fit for BMW G22, G23, G42, G80, G82, G83, and G87 models.

Key Benefits:

• Lightweight, handcrafted chopped carbon fibre construction for durability and performance.
• High-gloss lacquer finish for a sleek, premium appearance.
• Swan neck design with CNC-machined aluminium brackets for optimal weight-to-strength ratio.
• High-grade titanium reinforcements for enhanced structural stability.
• Motorsport-inspired aerofoil design maximizes downforce and minimizes drag.
• Fully adjustable to three levels for customizable performance tuning.
• ABE approved with KBA 31882 type certification, ensuring road legality.
• Optimized using computational fluid dynamics (CFD) for minimal air turbulence and noise.
• Compatible with BMW G22, G23, G82, and G83 models.

Upgrade your BMW with the Akrapovic Rear Wing Forged Carbon Fiber and experience the perfect blend of cutting-edge aerodynamics and premium craftsmanship.

Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish | BMW G80 M3 G82 M4

The Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish | BMW G80 M3 G82 M4 is a premium accessory designed to transform the look and performance of your BMW. Expertly hand-crafted in-house with ABE type approval, this chopped carbon fibre diffuser is engineered to accentuate the Akrapovič exhaust tailpipes, delivering a bold and sporty aesthetic. The matte finish adds a modern, sophisticated touch, while the lightweight construction ensures improved performance. Compatible with BMW G80 M3, G82 M4, xDrive, CSL, LCI, and M4 (G83) Competition models, this diffuser is a perfect blend of style and functionality.

Key Benefits:

• Enhances the sporty and aggressive appearance of BMW G80 M3 and G82 M4
• Showcases Akrapovič exhaust tailpipes for a standout design
• Matte finish adds a modern and sophisticated aesthetic
• Lightweight forged carbon fibre construction improves performance and durability
• Hand-crafted with precision and ABE type approval for unmatched quality
• Fits xDrive, CSL, LCI, and M4 (G83) Competition models for versatility

Upgrade your BMW with the Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish and enjoy a perfect blend of style, performance, and craftsmanship.

Akrapovic Carbon Fibre Mirror Cap Set - High Gloss - G42 G80 G82 G83 G87

The Akrapovic Carbon Fibre Mirror Cap Set - High Gloss - G42 G80 G82 G83 G87 is the ultimate customization upgrade for BMW M2 Coupé, M3, and M4 models. Designed to elevate the vehicle’s aesthetics, these mirror caps are crafted from high-grade, lightweight carbon fibre, offering a perfect blend of durability and sophistication. The high-gloss finish delivers a striking, premium look that enhances the car’s design lines while seamlessly complementing other Akrapovič performance accessories, such as the Slip-On Line (Titanium) exhaust and carbon-fibre rear wing. Handcrafted by skilled specialists, this mirror cap set ensures a flawless fit and exceptional quality. Please note that this product is not compatible with right-hand drive vehicles. However, it is fully compatible with M3 and M4 LCI versions, making it a versatile choice for BMW enthusiasts.

Key Benefits:

• Enhances the exterior aesthetics of BMW M2, M3, and M4 models.
• Constructed from high-grade, lightweight carbon fibre for durability and style.
• High-gloss finish provides a striking, premium appearance.
• Complements other Akrapovič carbon-fibre accessories for a cohesive look.
• Handcrafted by experts for a flawless fit and exceptional quality.
• Compatible with M3 and M4 LCI versions for added versatility.
• Note: Not suitable for right-hand drive vehicles.

Upgrade your BMW with the Akrapovic Carbon Fibre Mirror Cap Set - High Gloss - G42 G80 G82 G83 G87 and experience the perfect combination of style, performance, and craftsmanship.