BMW Aero & Body

Aero upgrades are undoubtedly one of the most visually striking enhancements you can make to your vehicle. A carbon fiber front lip, in particular, is a popular choice that instantly elevates the car's appearance, making it stand out from the crowd.

However, this bold aesthetic upgrade has its challenges, especially when navigating uneven roads or steep driveways that can potentially damage the expensive carbon fiber. Luckily, Acexxon offers a solution to safeguard your valuable lip from scratches and more serious damage, allowing you to fully enjoy the upgrade without worries.

The Acexxon kit comprises five 18-inch strips that securely attach to the underside of your lip using pre-installed 3M double-sided tape. Three of these strips feature a smooth end, seamlessly blending with the front lip's leading edge. The remaining two strips are designed with contour flex sections, ensuring a precise fit around the lip's curved contours. Compared to other kits, Acexxon's design minimizes trimming requirements, needing only the trimming of excess material at the lip's ends for a flawless finish.

Key Features:

Includes 5 strips Each strip measures 18" in length and 1.75" in width Thickness of 5.47mm Equipped with pre-installed 3M tape for easy installation

Acexxon's Honeycomb rear reflectors allow you to ditch the unattractive stock rear reflectors on your M5, giving your vehicle a more sporty look. Goes great with black grilles!

Installation is very single. Pop the old ones out with a pry tool and then pop in your new Acexxon reflectors.

This set of Honeycomb rear reflectors from Acexxon is Gloss Black. If you are looking for matte black Acexxon rear reflectors for your M5, here is the link.

This product fits the following BMWs:

F90 M5

RKP's trunk spoiler for the M2 offers aggressive exterior styling and additional downforce with a simple application of double sided tape. This piece is beautiful 2x2 weave carbon fiber, and will flow perfectly with the exterior of your M2.

This product fits the following BMWs:
2016+ F87 M2

HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping. 

*Does not include mounting support brackets*

This product offers the following:

Solid core, aluminum skinned, composite material

Easily replaceable

Extremely durable and flex resistant at high speeds

Satin Black top finish and unfinished bottom side

This fits the following vehicles:

E36 BMW All

Acexxon's Honeycomb rear reflectors allow you to ditch the unattractive stock rear reflectors on your X5M, giving your vehicle a more sporty look. Goes great with black grilles!

Installation is very single. Pop the old ones out with a pry tool and then pop in your new Acexxon reflectors.

This set of Honeycomb rear reflectors from Acexxon is Gloss Black. If you are looking for matte black Acexxon rear reflectors for your X5M, here is the link.

This product fits the following BMWs:
F85 X5M

HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.  

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Product fits the following vehicles:

E46 BMW Non-M Sedan

RKP's Carbon Fiber Roof is a direct replacement roof panel weighing only 7.5 lbs, saving you 60% weight when compared to stock. Not only does it look great on your vehicle, but it saves you valuable weight on your M2. This part is 1x1 weave, we also carry RKP's 2x2 weave piece.

Due to the nature of installation, Turner Motorsport strongly recommends professional installation.

This product fits the following BMWs:
2016+ F87 M2

Adding a carbon fiber roof saves you 15kg or more at the highest point of your vehicle - the roof. Not only does a full carbon fiber roof give your vehicle the signature BMW ///M look, but it also gives your vehicle a lower center of gravity.

Turner Motorsport highly recommends professional installation - installation requires removal of factory roof. 

The V2 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style plus an additional 20mm in width, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look. 

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Allows fitment of up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.

Product fits the following vehicles:

E36 BMW M3 (And all other e36 coupes with M mouldings)

RKP's rear diffuser adds aggressive exterior styling to your M2 in just minutes after simple installation.

This product fits the following BMWs:
2016+ F87 M2

To keep wind drag on the rear end of your E90 335i, HARD Motorsport has developed their lightweight Aluminum Rear Diffuser Kit. It reduces undercar drag, allowing for optimal downforce.

Diffuser is unpainted and does not work with stock exhaust. Straight pipes or custom exhaust work recommended.

Fits the following vehicles:

2006-2013 E90 BMW 335i