BMW Aero & Body

Vorsteiner VRS Aero Front Grille (Carbon Fiber) - G8x M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122285

Part#: BMV3305

Ships on Oct 28, 2026

$ 1,295.00 USD

Add to Wish List

Qty

$ 1,295.00 USD

Add to Wish List

Carbon fiber body parts are starting to become a dime-a-dozen, but this has caused a reduction in part quality. Vorsteiner takes great care to ensure every carbon fiber component they produce is of the highest quality, putting every piece through an independent inspection process to look for any potential imperfections before they leave the facility. In addition, the high gloss clear coating applied to their carbon fiber parts is a UV ray inhibiting coating that won't discolor or peel after only a few years of sun exposure. Looking to make your G8x M3 or M4 more unique? Then this may be the perfect option for you! Vorsteiner's VRS Aero Front Grille is designed for those looking to change their front grille over to a more aggressive option. This grille is composed of durable Carbon Fiber material which comes in a glossy finish. The wide open design allows for an increase in airflow as well. *Note that this grille is not compatible with vehicles equipped with front radars.

Show More Show Less

Dive Plane (Canard) Kit - BMW E9X M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27405483

Part#: A0203A

Ships in 3 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving a front splitter further forward. Verus Engineering developed the dive plane based on past knowledge and scan data obtained directly from an M3 for unparalleled fit and finish. This dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser. FEATURES Reduce Lift (Increase Downforce) Shift Aero Balance Forward Allows for Fine Tuning of Aero Balancing (Forward Biased) Help Seal Sides of Car Evacuate Air From the Front of the Wheel Well SPECIFICATIONS CFD Optimized Design Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition 3M Double-Sided Tape or Bolt-On Install Stainless Hardware Used Throughout Template for Install Included INCLUDED Dive Plane, Right-Hand Dive Plane, Left-Hand 3M VHB Double Sided Tape, Cut to Dive Plane Shape (2) Paper Template Hardware Kit, Includes All Necessary Hardware for Install

Show More Show Less

Vorsteiner VRS GTS Aluminum Uprights - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:567433

Part#: BMV2180B

Special Order: No Guaranteed ETA

$ 895.00 USD

Add to Wish List

Qty

$ 895.00 USD

Add to Wish List

One of the main benefits, in addition to improved handling, is that it keeps the trunk completely functional. It uses a unique lock-pin design that that connects the upper and lower supports without requiring other special brackets or mounting points for your GTS race spoiler. Vorsteiner uses only the highest quality components and the strictest quality control standards. This means your guaranteed to get the best form and fitment!

Show More Show Less

EVO Aero Carbon Fiber Decklid Spoiler - M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:396607

Part#: 4103BMV

Special Order: No Guaranteed ETA

$ 995.00 USD

Add to Wish List

Qty

$ 995.00 USD

Add to Wish List

Show off the racing heritage of your BMW with this Vorsteiner carbon fiber rear spoiler! This deck spoiler mounts to deck of your factory trunk to provide a cleaner and more aggressive look.

Vorsteiner VRS GTS Carbon Fiber Aero Wing Blade - Black Uprights - F8...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:567445

Part#: BMV2170KT

Ships on Sep 15, 2026

$ 3,490.00 USD

Add to Wish List

Qty

$ 3,490.00 USD

Add to Wish List

Looking to get the ultimate performance out of your BMW M3 or M4? This VRS GTS Carbon Fiber Aero Wing Blade with Black Uprights is perfectly designed for your F80/82 BMW to optimize rear downforce, applying pressure to the rear wheels to increase traction at high speeds, helping you shave seconds off of your lap time thanks to improved handling.

Show More Show Less

Carbon Dive Plane (Canard) Kit - G87 BMW M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27405470

Part#: A0539A

Ships in 3 Business Days

$ 529.99 USD

Add to Wish List

Qty

$ 529.99 USD

Add to Wish List

The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving the front splitter further forward. Dive planes, when designed properly, improve downforce on the units themselves as well as improving wheel well evacuation which is what Verus Engineering focuses on in their development. By manipulating the flow around the vehicle, Verus Engineering is able to improve vehicle performance. Utilizing state-of-the-art analysis software during the R&D process, Verus Engineering was able to extract more performance for the given build volume; increasing downforce generated from the dive planes. This dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser. FEATURES Reduce Lift (Increase Downforce) Shift Aero Balance Forward Allows for Fine Tuning of Aero Balancing (Forward Biased) Help Seal Sides of Car Evacuate Air From the Front of the Wheel Well SPECS CFD Optimized Design Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition 3M Double-Sided Tape or Bolt-On Install Template for Install Included INCLUDED Lower Dive Plane, Right-Hand (1) Lower Dive Plane, Left-Hand (1) Upper Dive Plane, Right-Hand (1) Upper Dive Plane, Left-Hand (1) 3M VHB Double Sided Tape, Cut to Dive Plane Shape (4) Template (2) Hardware Kit, Includes All Necessary Hardware for Install

Show More Show Less

Verus Engineering Carbon Polyweave Side Splitter Kit - BMW G87 M2 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28371152

Part#: A0580A

Ships in 3 Business Days

9% off MSRP $ 802.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 729.99 USD

Add to Wish List

Qty

9% off MSRP

$ 802.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 729.99 USD

Add to Wish List

The Verus Engineering Carbon Polyweave Side Splitter Kit completes the aerodynamic appearance of your BMW G87 M2. These units were designed specifically to flow with the factory side-splitter and feature a horizontal member which reduces the amount of high-pressure air making its way to the bottom side of the vehicle. This high-pressure air produces lift, and by reducing this, we reduce lift on the chassis. This is specifically prevalent while the vehicle is in yaw or while turning.

The side splitters are constructed from a very strong and durable carbon thermoplastic (Carbon Polyweave). This offers the exotic appearance and strength of carbon, with the durability of plastic. The units will be able to withstand impacts much better than carbon fiber.

Features:

Reduce Lift (Increase Downforce)
Improve Overall Aerodynamic Efficiency
Reduce Lap Times
Increase Gas Mileage
Will Not Grab and Bend Surfaces Like Aluminum Units
Will Not Crack and Break Like Carbon and ABS Units
Abrasive Resistant While Stiff

Specifications:

Carbon Thermoplastic Composition (Carbon Polyweave)
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Stainless Hardware Used Throughout
Made in the U.S.A.

Included:

Carbon Polyweave Side Splitter, Left-Hand
Carbon Polyweave Side Splitter, Right-Hand
Hardware Kit, Includes All Hardware Necessary for Install

Show More Show Less

V20 Aero Splitter - Gloss Carbon Fiber PP 1x1

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229092

Part#: BMV5620

Special Order: No Guaranteed ETA

$ 1,092.99 USD

Add to Wish List

Qty

$ 1,092.99 USD

Add to Wish List

In celebration of Vorsteiner's 20th anniversary, Vorsteiner has developed a modernized version of the V-CSL Carbon Fiber Program for the BMW E46 M3. The updated V20 program features dual acorn-shaped snorkels integrated into the front bumper, paired with a redesigned one-piece front spoiler. The double-sided carbon fiber hood includes raised vents on both sides to enhance hot air extraction from the engine bay. Additionally, the rear diffuser now includes dual diffuser elements, improving airflow across the diffuser. The V20 will be a limited production of just 103 units, honoring the exceptional horsepower per liter of the BMW E46 CSL. Below is an overview of all the V-CSL components, each meticulously crafted using Vorsteiner's 1X1 weaved pre-preg autoclaved carbon fiber and produced at Vorsteiner's California facility.

Show More Show Less

Vorsteiner GTS Aero Carbon Fiber Front Spoiler - F8X M3 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:396604

Part#: 4000BMV

Special Order: No Guaranteed ETA

$ 1,595.00 USD

Add to Wish List

Qty

$ 1,595.00 USD

Add to Wish List

This Vorsteiner front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality 1x1 twill weave, this part attaches easily and accentuates your BMW's natural body lines, thus creating a high-class performance look. Professional installation is recommended.

Show More Show Less

VRS GTS-V Aero Carbon Fiber Front Spoiler - F12 M6

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:396620

Part#: 6004BMV

Special Order: No Guaranteed ETA

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

This Vorsteiner front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality 1x1 twill weave, this part attaches easily and accentuates your BMW's natural body lines, thus creating a high-class performance look. Professional installation is recommended.

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. The relentless pursuit of advancement and perfection is seen not only in the unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles.

Show More Show Less

Vorsteiner Carbon Fiber Rear Diffuser GTS Or GTS-V - F80/82/82 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9416032

Part#: 4001BMV

Ships on Sep 15, 2026

Starting at $ 1,895.00 USD

Add to Wish List

Starting at $ 1,895.00 USD

Add to Wish List

GTS: This Vorsteiner rear diffuser was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality 1x1 twill weave, this part attaches easily and accentuates your BMW's natural body lines, thus creating a high-class performance look. Professional installation is recommended. Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. The relentless pursuit of advancement and perfection is seen not only in the unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles. GTS-V: The VRS GTS-V Aero Carbon Fiber Rear Diffuser from Vorsteiner is a high quality, lightweight diffuser that has been developed to add a significantly more aggressive style to your BMW! Rear diffusers on standard street cars are limited in how effective they can be in aiding with downforce, but with aggressive fins can still aid in preventing air turbulence at the rear of the vehicle.

Show More Show Less

Verus Engineering Front Splitter Kit - BMW G87 M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31556104

Part#: A0536A

Ships in 3 Business Days

$ 2,599.99 USD

Add to Wish List

Qty

$ 2,599.99 USD

Add to Wish List

Front splitters are very effective at producing front-end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. Utilizing scan data directly from the car and CFD, we were able to produce a splitter that pairs well with our UCW rear wing and can easily handle the loads seen by the splitter. Splitter tunnels or splitter diffusers were added to increase front end downforce further than a flat blade alone. The splitter mounts to multiple chassis locations for a strong and durable mounting style. All hardware locations are recessed for improved aerodynamic performance. During research and development, great care and focus was taken to ensure the oil cooler's exit airflow did not adversely hurt splitter performance. We offer a block off plate, an exit duct, and you can run the car with a wide open splitter as well, for varying levels of front on downforce and performance. The splitter is produced from a carbon polyweave, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. The material is also lightweight and stiff; which makes it a great splitter material The air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further. The air dam is produced from sheet aluminum and then powder coated black for durability. Features: Greatly Increases Front End Downforce Produces High Downforce for Large Rear Wings Capable of Handling 300+ Lbs Constructed From Carbon Polyweave, Which Offers Strength, Low Weight, Durability, and a Great Appearance Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1 Splitter Diffusers designed for improved performance Integrated Air Dam that Follows The Front Bumper Lines Well Specifications: Front Splitter is Manufactured From Carbon Polyweave, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options Will Not Grab and Bend Surfaces Like Aluminum Units Will Not Crack and Break Like Carbon and ABS Units Abrasive Resistant While Stiff 5052 Aluminum Air Dam Carbon Diffuser Tunnels CNC Cut and Bent Brackets Stainless Hardware Throughout INCLUDED: Two-Piece Carbon Polyweave Splitter Blade Three-Piece Aluminum Front Air Dam (6) Sheet Steel Chassis Bracket (2) Steel Chassis Bracket (2) Splitter Diffuser Tunnel (1) Oil Cooler Exit Duct (1) Oil Cooler Block Off Plate Rubber Edge Seal for Air Dam Hardware Kit Including All Necessary Bolts/Nuts/Washers for a seamless install

Show More Show Less

Vorsteiner VRS Aero Front Grille (ABS Plastic) - G8x M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122284

Part#: BMV3325

Special Order: No Guaranteed ETA

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Looking to make your G8x M3 or M4 more unique? Then this may be the perfect option for you! Vorsteiner's VRS Aero Front Grille is designed for those looking to change their front grille over to a more aggressive option. This grille is composed of durable ABS material which comes in a glossy black finish. The wide open design allows for an increase in airflow as well. *Note that this grille is not compatible with vehicles equipped with front radars.

Show More Show Less

EVO Aero Carbon Fiber Decklid Spoiler - M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:396606

Part#: 4102BMV

Special Order: No Guaranteed ETA

$ 995.00 USD

Add to Wish List

Qty

$ 995.00 USD

Add to Wish List

Show off the racing heritage of your BMW with this Vorsteiner carbon fiber rear spoiler! This deck spoiler mounts to deck of your factory trunk to provide a cleaner and more agressive look.

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. Their relentless pursuit of advancement and perfection is seen not only in their unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles.

Every Vorsteiner product is rigorously tested and must pass the highly detailed quality control before leaving the on-site Vorsteiner factory. Only after rigorous testing can a part be deemed worthy of the Vorsteiner name. Their clientele expect nothing less than perfection from Vorsteiner, and they welcome and exceed these expectations.

Vorsteiner's Autoclaved Pre-Preg Carbon Fiber structure gives their parts superior stiffness, aerospace strength & durability compared to traditional hand laid carbon fiber composites.

Show More Show Less

V20 Aero Front Bumper - Gloss Carbon Fiber PP 1x1

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229101

Part#: BMV5610

Special Order: No Guaranteed ETA

$ 2,895.00 USD

Add to Wish List

Qty

$ 2,895.00 USD

Add to Wish List

In celebration of Vorsteiner's 20th anniversary, Vorsteiner has reimagined the V-CSL Carbon Fiber Program for the BMW E46 M3 with a modern twist. The revamped V20 program features dual acorn-shaped snorkels integrated into the front bumper, complemented by the iconic 2-piece front splitter. The double-sided carbon fiber hood includes raised vents on both sides to enhance hot air extraction from the engine bay. The rear diffuser has also been upgraded with dual diffuser elements, optimizing airflow. The V20 will be produced in a limited run of 103 units, honoring the impressive horsepower per liter of the BMW E46 CSL. Below is an overview of all the V-CSL components, each meticulously crafted from Vorsteiner's 1X1 weaved pre-preg autoclaved carbon fiber and produced at Vorsteiner's California facility.

Show More Show Less

Carbon Fiber Hood Louver Kit - G87 BMW M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27405469

Part#: A0534A

Ships in 3 Business Days

$ 589.99 USD

Add to Wish List

Qty

$ 589.99 USD

Add to Wish List

The Verus Engineering Carbon Hood Louver Kit for G87 BMW M2 helps reduce engine bay heat and pressure. The louver improves cooling stack efficiency, under hood component longevity, and adds a bump in the front end downforce by alleviating air pressure in the engine bay. Using scan data, Verus Engineering developed the hood louver to have an OEM-type fit and finish to the hood's contour. Verus Engineering took special care to ensure the louver was placed in an area that removed *minimal* under hood structure as well as in an area of low pressure for maximum evacuation. Through CFD and on-track data, Verus Engineering found the louvers to work very well on the car, dramatically reducing under-hood temperatures and improving aero balance. FEATURES Retains OEM Hood's Structural Integrity Reduce Under Hood Pressure and Temperature CFD Optimized Design Scan Data Used for OEM Fit and Finish OEM-Plus Appearance and Install Cut-Out Template Included SPECIFICATIONS Pre-Preg, 2x2 Twill, Autoclave Cured, Carbon Fiber Composition Paper Cut Template 3M VHB Double Sided Tape INCLUDED Carbon Hood Louver Cut Template Small White Verus Vinyl Sticker 3M VHB Double-Sided Tape, Specifically Cut To Louver Shape

Show More Show Less

Vorsteiner VRS Aero Side Skirts (Carbon Fiber) - G8x M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122287

Part#: BMV3330

Special Order: No Guaranteed ETA

$ 2,995.00 USD

Add to Wish List

Qty

$ 2,995.00 USD

Add to Wish List

Carbon fiber body parts are starting to become a dime-a-dozen, but this has caused a reduction in part quality. Vorsteiner takes great care to ensure every carbon fiber component they produce is of the highest quality, putting every piece through an independent inspection process to look for any potential imperfections before they leave the facility. In addition, the high gloss clear coating applied to their carbon fiber parts is a UV ray inhibiting coating that won't discolor or peel after only a few years of sun exposure. Looking to make your G8x M3 or M4 more unique? Then these may be the perfect option for you! Vorsteiner's VRS Aero Side Skirts are designed for those looking to add more flair and function to their vehicle. These skirts are composed of durable Carbon Fiber material which come in a glossy finish. The winged design adds style while also increasing overall downforce.

Show More Show Less

VRS Aero Decklid Spoiler Carbon Fiber - 2x2 Glossy - F9X M8

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11857198

Part#: BMV8060

Special Order: No Guaranteed ETA

$ 2,695.00 USD

Add to Wish List

Qty

$ 2,695.00 USD

Add to Wish List

Providing subtle downforce, the rear deck lid spoiler elevates airflow off the boot, completing the silhouette of the BMW M8.

UCW Swan Neck Rear Wing Kit - FFV Endplates - G87 BMW M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27405472

Part#: A0535A-FFV

Ships in 3 Business Days

9% off MSRP $ 3,074.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,794.99 USD

Add to Wish List

Qty

9% off MSRP

$ 3,074.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,794.99 USD

Add to Wish List

The UCW Swan Neck Rear Wing is a great addition to your BMW G87 M2 to increase downforce significantly in the rear, increase confidence on track, and reduce lap times. Designed to work on the factory trunk and handle the downforce well, the rear wing bolts on easily and improves performance this sports car can utilize on track. Utilizing state-of-the-art analysis software during the R&D process, we optimized the airfoil for performance for the given build volume which is derived from the V1X. Further utilizing CFD, we ensured the rear wing sees adequate airflow while installed on the car and performs well. During the design process; we utilized in-house scan data. This results in a product that features a near OEM fit and finish. Utilizing a goose neck or swan neck style of mounting improves wing efficiency and performance. The UCW Rear Wing is the perfect addition to the track goer who requires a large bump in rear downforce to balance out a significant front aero package. NOTE: UCW Wings are assembled per order and will ship within 5 business days from receipt of order unless otherwise specified. FEATURES Optimized Airfoil Using ANSYS Adjoint Solver Improved Swan Neck or Goose Neck Style Wing Mounting Improved Efficiency (L/D) Increased Downforce Bolts to OEM Trunk Capable of Generating and Withstanding 500+lbs of Downforce Capable of Balancing Out Significant Front Aerodynamic Systems SPECIFICATIONS Carbon Fiber Rear Wing - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear Machined Billet Aluminum Uprights Machined Billet Aluminum Trunk Mounts Rear Wing Trunk Mount Spacers, Machined Stainless Stainless Hardware Throughout INCLUDED Rear Wing Element Assembly Swan Neck Rear Wing Uprights, Machined Aluminum (2) Rear Wing Trunk Mount, Machined Aluminum (2) Rear Wing Trunk Mount Spacer, Machined Stainless (4) Rear Wing Carbon Endplate (2) Hardware Kit, Includes All Parts Necessary for a Seamless Install Includes Drill Template Includes Hard Plastic Trunk Stops

Show More Show Less

Vorsteiner VRS Aero Front Splitter (Carbon Fiber) - G8x M3/M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122290

Part#: BMV3320

Special Order: No Guaranteed ETA

$ 2,495.00 USD

Add to Wish List

Qty

$ 2,495.00 USD

Add to Wish List

Carbon fiber body parts are starting to become a dime-a-dozen, but this has caused a reduction in part quality. Vorsteiner takes great care to ensure every carbon fiber component they produce is of the highest quality, putting every piece through an independent inspection process to look for any potential imperfections before they leave the facility. In addition, the high gloss clear coating applied to their carbon fiber parts is a UV ray inhibiting coating that won't discolor or peel after only a few years of sun exposure. Looking to make your G8x M3 or M4 more unique? Then this may be the perfect option for you! Vorsteiner's VRS Aero Front Splitter is designed for those looking to add some flair and function to their vehicle. This splitter is composed of durable Carbon Fiber material which comes in a glossy finish. In addition to being light and stylish, this splitter also allows for an increase in downforce thanks to its design.

Show More Show Less

Vorsteiner VRS Aero Trunk Spoiler (Carbon Fiber) - G8x M3/M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122291

Part#: BMV3360

Special Order: No Guaranteed ETA

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Carbon fiber body parts are starting to become a dime-a-dozen, but this has caused a reduction in part quality. Vorsteiner takes great care to ensure every carbon fiber component they produce is of the highest quality, putting every piece through an independent inspection process to look for any potential imperfections before they leave the facility. In addition, the high gloss clear coating applied to their carbon fiber parts is a UV ray inhibiting coating that won't discolor or peel after only a few years of sun exposure. Looking to make your G8x M3 or M4 more unique? Then this may be the perfect option for you! Vorsteiner's VRS Aero Trunk Spoiler is designed for those looking to add some flair and function to their vehicle. This spoiler is composed of durable Carbon Fiber material which comes in a glossy finish. In addition to being lighter and more aggressive looking, this spoiler also allows for an increase in downforce thanks to its design.

Show More Show Less

VRS Aero Diffuser - G87 M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:55821686

Part#: BMV3250

Special Order: No Guaranteed ETA

$ 2,515.99 USD

Add to Wish List

Qty

$ 2,515.99 USD

Add to Wish List

Track-ready autoclave carbon fiber diffuser optimizing high-speed downforce and airflow.

VRS Aero Rear Diffuser Carbon Fiber - 2x2 Glossy - F9X M8

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11857199

Part#: BMV8050

Special Order: No Guaranteed ETA

$ 2,495.00 USD

Add to Wish List

Qty

$ 2,495.00 USD

Add to Wish List

In full carbon fiber, the fins extend beyond the rear bumper, providing race-inspired enhancements which directly replace the OEM lower diffuser. The Vorsteiner aero kit comprises of 4 components that amplify the visual appearance, providing an upgrade to the BMW M8 platform.

Show More Show Less

Vorsteiner VRS Aero Rear Diffuser (Carbon Fiber) - G8x M3/M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122289

Part#: BMV3350

Special Order: No Guaranteed ETA

$ 2,995.00 USD

Add to Wish List

Qty

$ 2,995.00 USD

Add to Wish List

Carbon fiber body parts are starting to become a dime-a-dozen, but this has caused a reduction in part quality. Vorsteiner takes great care to ensure every carbon fiber component they produce is of the highest quality, putting every piece through an independent inspection process to look for any potential imperfections before they leave the facility. In addition, the high gloss clear coating applied to their carbon fiber parts is a UV ray inhibiting coating that won't discolor or peel after only a few years of sun exposure. Looking to make your G8x M3 or M4 more unique? Then this may be the perfect option for you! Vorsteiner's VRS Aero Rear Diffuser is designed for those looking to add some flair and function to their vehicle. This diffuser is composed of durable Carbon Fiber material which comes in a glossy finish. In addition to being lighter and more aggressive looking, this diffuser also allows for an increase in downforce thanks to its design.

Show More Show Less

VRS Aero Eyebrows On Rear Bumper - F9X M8

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11857197

Part#: BMV8025

Special Order: No Guaranteed ETA

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

The Vorsteiner aero kit comprises of 4 components that amplify the visual appearance, providing an upgrade to the BMW M8 platform. Amplifying the M8’s existing body lines, these eyebrows give the look that the platform deserves.

Show More Show Less

VRS Aero Bootlid Ll - G87 M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:55821684

Part#: BMV3235

Special Order: No Guaranteed ETA

$ 3,595.99 USD

Add to Wish List

Qty

$ 3,595.99 USD

Add to Wish List

Lightweight pre-preg carbon fiber race trunk optimizing rear high-speed downforce.

V20 Aero Rear Diffuser - Gloss Carbon Fiber PP 1x1

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38229084

Part#: BMV5650

Special Order: No Guaranteed ETA

$ 1,695.00 USD

Add to Wish List

Qty

$ 1,695.00 USD

Add to Wish List

In celebration of Vorsteiner's 20th anniversary, the company has introduced a modernized version of the V-CSL Carbon Fiber Program for the BMW E46 M3. The new V20 program features dual acorn-shaped snorkels integrated into the front bumper, along with a redesigned one-piece front spoiler. The double-sided carbon fiber hood includes raised vents on both sides to enhance hot air extraction from the engine bay. Additionally, the rear diffuser now incorporates dual diffuser elements, optimizing airflow. Limited to just 103 units, the V20 pays tribute to the remarkable horsepower per liter of the BMW E46 CSL.

Show More Show Less

VRS GTS-V Aero Carbon Fiber Front Spoiler - F10 M5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:396629

Part#: 5005BMV

Special Order: No Guaranteed ETA

$ 1,719.00 USD

Add to Wish List

Qty

$ 1,719.00 USD

Add to Wish List

This Vorsteiner front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality 1x1 twill weave, this part attaches easily and accentuates your BMW's natural body lines, thus creating a high-class performance look. Professional installation is recommended.

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. The relentless pursuit of advancement and perfection is seen not only in the unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles.

Show More Show Less

VRS Aero Carbon Fiber Rear Diffuser - F12 M6

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:396626

Part#: 6001BMV

Special Order: No Guaranteed ETA

$ 1,895.00 USD

Add to Wish List

Qty

$ 1,895.00 USD

Add to Wish List

This Vorsteiner rear diffuser was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality 1x1 twill weave, this part attaches easily and accentuates your BMW's natural body lines, thus creating a high-class performance look. Professional installation is recommended.

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. The relentless pursuit of advancement and perfection is seen not only in the unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles.

Show More Show Less

UCW Swan Neck Rear Wing Kit - Square Endplates - G87 BMW M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27405471

Part#: A0535A

Ships in 3 Business Days

9% off MSRP $ 3,074.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,794.99 USD

Add to Wish List

Qty

9% off MSRP

$ 3,074.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,794.99 USD

Add to Wish List

The UCW Swan Neck Rear Wing is a great addition to your BMW G87 M2 to increase downforce significantly in the rear, increase confidence on track, and reduce lap times. Designed to work on the factory trunk and handle the downforce well, the rear wing bolts on easily and improves performance this sports car can utilize on track. Utilizing state-of-the-art analysis software during the R&D process, we optimized the airfoil for performance for the given build volume which is derived from the V1X. Further utilizing CFD, we ensured the rear wing sees adequate airflow while installed on the car and performs well. During the design process; we utilized in-house scan data. This results in a product that features a near OEM fit and finish. Utilizing a goose neck or swan neck style of mounting improves wing efficiency and performance. The UCW Rear Wing is the perfect addition to the track goer who requires a large bump in rear downforce to balance out a significant front aero package. NOTE: UCW Wings are assembled per order and will ship within 5 business days from receipt of order unless otherwise specified. FEATURES Optimized Airfoil Using ANSYS Adjoint Solver Improved Swan Neck or Goose Neck Style Wing Mounting Improved Efficiency (L/D) Increased Downforce Bolts to OEM Trunk Capable of Generating and Withstanding 500+lbs of Downforce Capable of Balancing Out Significant Front Aerodynamic Systems SPECIFICATIONS Carbon Fiber Rear Wing - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear Machined Billet Aluminum Uprights Machined Billet Aluminum Trunk Mounts Rear Wing Trunk Mount Spacers, Machined Stainless Stainless Hardware Throughout INCLUDED Rear Wing Element Assembly Swan Neck Rear Wing Uprights, Machined Aluminum (2) Rear Wing Trunk Mount, Machined Aluminum (2) Rear Wing Trunk Mount Spacer, Machined Stainless (4) Rear Wing Carbon Endplate (2) Hardware Kit, Includes All Parts Necessary for a Seamless Install Includes Drill Template Includes Hard Plastic Trunk Stops

Show More Show Less

VRS Aero Front Spoiler Carbon Fiber - 2x2 Glossy - F9X M8

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11857200

Part#: BMV8020

Special Order: No Guaranteed ETA

$ 2,495.00 USD

Add to Wish List

Qty

$ 2,495.00 USD

Add to Wish List

The 2x2 weave, carbon fiber front spoiler enhances the original appearance of the OEM front bumper while providing functional aerodynamic upgrades. The Vorsteiner aero kit comprises of 4 components that amplify the visual appearance, providing an upgrade to the BMW M8 platform.

Show More Show Less

UCW Rear Wing Kit - BMW E92 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27405484

Part#: A0303A

Ships in 3 Business Days

$ 1,895.99 USD

Add to Wish List

Qty

$ 1,895.99 USD

Add to Wish List

The UCW Rear Wing is a great addition to your BMW M3 to increase downforce significantly in the rear, increase confidence on track, and reduce lap times. Designed to work on the factory trunk and handle the downforce well, the rear wing bolts on easily and improves performance this sports car can utilize on track. During the design process; we utilized in-house scan data. This results in a product that features a near OEM fit and finish. The UCW Rear Wing is the perfect addition to the track goer who requires a large bump in rear downforce to balance out a significant front aero package. NOTE: UCW Wings are assembled per order and will ship within 5 business days from receipt of order unless otherwise specified. FEATURES Optimized Airfoil Using ANSYS Adjoint Solver Improved Efficiency (L/D) Increased Downforce Bolts to OEM Trunk Capable of Generating and Withstanding 500+lbs of Downforce Capable of Balancing Out Significant Front Aerodynamic Systems SPECIFICATIONS Carbon Fiber Rear Wing - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear Machined Billet Aluminum Uprights CNC Cut and Bent Trunk Mounts Stainless Hardware Throughout INCLUDED Rear Wing Element Assembly Rear Wing Uprights, Machined Aluminum (2) Rear Wing Trunk Mount, Sheet Steel (2) Rear Wing Carbon Endplate (2) Hardware Kit, Includes All Parts Necessary for a Seamless Install Includes Drill Template

Show More Show Less

V20 Aero Hood - Gloss Carbon Fiber PP 1x1

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
This hood is made to order and typcially takes 8+ weeks to manufacture and ship

T#:38229088

Part#: BMV5655

Special Order: No Guaranteed ETA

$ 3,395.00 USD

Add to Wish List

Qty

$ 3,395.00 USD

Add to Wish List

In honor of Vorsteiner's 20th anniversary, the company has reimagined the V-CSL Carbon Fiber Program for the BMW E46 M3 with a modernized design. The new V20 program features dual acorn-shaped snorkels seamlessly integrated into the front bumper, complemented by a redesigned one-piece front spoiler. The double-sided carbon fiber hood is designed with raised vents on both sides to enhance heat extraction from the engine bay. Additionally, the rear diffuser now incorporates dual diffuser elements, further optimizing airflow. Limited to just 103 units, the V20 pays homage to the exceptional horsepower per liter of the BMW E46 CSL. Below is an overview of the V-CSL components, each expertly crafted using Vorsteiner's 1X1 weaved pre-preg autoclaved carbon fiber and produced at the company’s California facility.

Show More Show Less

Verus Engineering Front Splitter Endplates - G87 BMW M2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38452844

Part#: A0613AG87

Ships in 3 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Verus Engineering Front Splitter Endplates - G87 BMW M2 Maximize the aerodynamic performance of your G87 BMW M2 with the Verus Engineering Front Splitter Endplates, engineered to refine airflow and improve front-end stability. Designed to complement the Verus Engineering Front Splitter, these endplates help manage high-pressure airflow, reducing front-end lift and optimizing downforce balance. Constructed from lightweight yet durable carbon composite, these endplates not only enhance aerodynamic efficiency but also add a race-inspired aesthetic to your M2. Whether you're attacking corners on the track or carving through backroads, these endplates provide an edge in both form and function. Features & Benefits: ✔ Enhanced Aerodynamics – Directs airflow around the front wheels for improved stability ✔ Track-Tested Performance – Reduces high-pressure air bleed-off, increasing front downforce ✔ Premium Materials – Lightweight carbon composite for strength and durability ✔ Seamless Fit – Designed to integrate perfectly with the Verus Engineering Splitter ✔ Aggressive Styling – Adds a motorsport-inspired look to your M2 Take your G87 M2’s aerodynamics to the next level with Verus Engineering Front Splitter Endplates—where performance meets precision.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results