Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
10-07-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The Verus Engineering Carbon Polyweave Side Splitter Kit completes the aerodynamic appearance of your BMW G87 M2. These units were designed specifically to flow with the factory side-splitter and feature a horizontal member which reduces the amount of high-pressure air making its way to the bottom side of the vehicle. This high-pressure air produces lift, and by reducing this, we reduce lift on the chassis. This is specifically prevalent while the vehicle is in yaw or while turning.
The side splitters are constructed from a very strong and durable carbon thermoplastic (Carbon Polyweave). This offers the exotic appearance and strength of carbon, with the durability of plastic. The units will be able to withstand impacts much better than carbon fiber.
Features:
Specifications:
Included:
HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.
*Does not include mounting support brackets*
This product offers the following:
Solid core, aluminum skinned, composite material
Easily replaceable
Extremely durable and flex resistant at high speeds
Satin Black top finish and unfinished bottom side
This fits the following vehicles:
E36 BMW All
HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Product fits the following vehicles:
E46 BMW Non-M Sedan
The V2 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style plus an additional 20mm in width, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Allows fitment of up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.
Product fits the following vehicles:
E36 BMW M3 (And all other e36 coupes with M mouldings)
To keep wind drag on the rear end of your E90 335i, HARD Motorsport has developed their lightweight Aluminum Rear Diffuser Kit. It reduces undercar drag, allowing for optimal downforce.
Diffuser is unpainted and does not work with stock exhaust. Straight pipes or custom exhaust work recommended.
Fits the following vehicles:
2006-2013 E90 BMW 335i
HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.
Includes mounting support brackets and installation hardware.
This product offers the following:
This fits the following vehicles:
E46 BMW All w/ M3 Front Bumper
HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.
Includes mounting support brackets and installation hardware.
This product offers the following:
This fits the following vehicles:
E36 BMW All
HARD Motorsport's Motorsport Chassis Mount Wing Upright kit has everything you need to mount a rear wing to your E90 BMW. the brackets mount directly to the chassis making sure that all downforce is applied right where it is needed and not just the upper trunk area, helping to keep the low center of gravity. The upright supports match the original profile of the OEM trunk to keep it looking just as clean as it is functional. All supports are made from sturdy, lightweight aluminum. Includes all needed mounting hardware.
One of the main benefits, in addition to improved handling, is that it keeps the trunk completely functional. It uses a unique lock-pin design that that connects the upper and lower supports without requiring other special brackets or mounting points.
Product fits the following vehicles:
E90 BMW All submodels
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The V1 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Allows fitment of up to 275/35/18 rubber on 18x9.5 ET35 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.
Product fits the following vehicles:
E36 BMW Sedan and "ti" models
HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Product fits the following vehicles:
E46 BMW Non-M Coupes
The BMW E90 Widebody Style REAR is the ultimate upgrade for BMW enthusiasts seeking an aggressive, track-inspired stance for their 3 Series. This rear widebody kit, available from Turner Motorsport, is expertly designed to enhance the visual and performance aspects of your BMW E90. With durable materials engineered to handle the demands of the road, this kit is ideal for those looking to push their BMW’s limits in both style and function. Achieve a bold and commanding look that turns heads on the street or at the track.
Elevate your E90’s style and performance with this widebody rear upgrade, combining aggressive aesthetics with Turner Motorsport’s industry-leading expertise in BMW modifications.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.