Vacuumed Carbon Performance Trunk Spoiler - F06 F13 6 Series & M6 ...

T#:396201

Part#: BM-0293

Ships in 7 Business Days

$ 384.99 USD

Add to Wish List

Qty

$ 384.99 USD

Add to Wish List

Is the rear end of your F13 boring you? Install a vacuumed carbon fiber performance style trunk spoiler to instantly make your rear end more aggressive. Install can be completed in minutes with double-sided adhesive.

This product fits the following BMWs:
2011+ F13 6-Series Coupe 640i 640iX 650i 650iX 650iX 4.0 650iX 4.4 M6
2013+ F06 640i 640i xDrive 650i 650i xDrive ALPINA B6X
2012 F06 M6

Show More Show Less

Seibon OE style carbon fiber hood - E92 3 series

T#:396298

Part#: HD0708BMWE922D-O

Special Order: No Guaranteed ETA

$ 1,260.00 USD

Add to Wish List

Qty

$ 1,260.00 USD

Add to Wish List

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

Proprietary methods to lay wet carbon for a stronger and lighter product
UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
No black paint is used to hide imperfections along detail edges and creases.
Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E92 325i 325xi 328i 328xi 335i 335xi

Show More Show Less

E89 Z4 M Sport 3D Design Carbon Fiber Rear Diffuser - Quad Exhaust ...

T#:390504

Part#: 3108-18931

Ships in 3 Business Days

$ 1,875.00 USD

Add to Wish List

Qty

$ 1,875.00 USD

Add to Wish List

These 3D Design side skirts were designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from beautiful carbon fiber, they attach easily and accentuate your BMW's natural body lines, creating a high-class performance look.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Show More Show Less

Suvneer M2 Competition Style Front Bumper - BMW F30 3'

T#:51320824

Part#: F30M2CFT

Ships in 5 Business Days

$ 705.00 USD

Add to Wish List

Qty

$ 705.00 USD

Add to Wish List

The Suvneer F30 M2 Competition Style Front Bumper is a premium aftermarket body component designed for owners seeking a high-fidelity M-conversion.

F12 Painted Front Bumper Reflectors - F12/F13 640i 650i - w M Sport ...

T#:338835

Part#: TMS186958

Ships in 3 Business Days

Starting at $ 125.00 USD

Add to Wish List

Starting at $ 125.00 USD

Add to Wish List

We love the look of the new F12/F13 6 series. But the large orange reflectors on the front wheel arches HAS TO GO! These professionally painted reflectors replace the ugly orange reflectors with PERFECTLY COLOR MATCHED pieces so that they blend in perfectly with your bumper. No Simply remove your stock orange reflectors, and install these painted reflectors. Professional 3M adhesive makes installation a breeze, as well as insures these will be installed securely. These particular reflectors are for the 2012 and newer 6 series (F12/F13).

Please select your color below, using the drop down options.

This item fits the following BMWs:
2012+ F12 BMW 640i 650i 650i xDrive
** Only for cars with M Sport front bumper***

Show More Show Less

Autotecknic Dry Carbon Fiber Front Bumper Trim - G20 330I M-Sport ...

T#:5189161

Part#: ATK-BM-0217

Ships in 7 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's dry carbon fiber front bumper trims are a great upgrade to the G20 330I M-sport's front bumper. These replace the original plastic trims, giving your G20 a more polished look. The front trim set is made out of 3K twill weave carbon fiber for the ultimate light-weight, high-durability, and precise-fitment. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Suvneer OEM Style Front Bumper Fog Light Cover - Right - BMW E60 5' ...

T#:51180359

Part#: E60FOGCVR-R

Ships in 5 Business Days

$ 524.00 USD

Add to Wish List

Qty

$ 524.00 USD

Add to Wish List

The Suvneer E60 Right Side Fog Light Cover provides a cost-effective yet premium solution for front-end restoration.

Dinan Carbon Fiber Side Skirts - G80/G82/G83

Call In Or Chat For Best Price!

T#:23020156

Part#: D980-0047

Ships in 5 Business Days

Sale - Save 10% $ 2,049.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,844.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,049.99

This product was last offered at the strikethrough price on
07-31-2026

$ 1,844.96 USD

Add to Wish List

Invoking the feeling of motion, the Dinan side skirts for the G8x M3/M4 take the factory runners and add a touch of attitude that enhances select body lines courtesy of the rear flares. Together, when matched with the Dinan front lip and rear diffuser/splitters the side skirts create a continuous and fluid carbon fiber cosmetic solution around the entirety of the vehicle. Features: 2x2 gloss twill dry carbon fiber (pre-preg) manufactured to be impact-resistant, durable, and strong Clear-coated for maximum UV protection and fade resistance Includes 3M double-sided tape and mounting screws for easy installation with a clean fit and finish

Show More Show Less

AutoTecknic Smoked Dynamic Sequential LED Turn Signal - G80 M3 | G82/...

T#:39025545

Part#: BM-0261-G8X

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Upgrade the lighting system of your BMW G80 M3 or G82/G83 M4 with the AutoTecknic Smoked Dynamic Sequential LED Turn Signals from Turner Motorsport for a stylish, functional, and durable enhancement to your vehicle.

Show More Show Less

Glacier Silver Metalic (A83) Painted Reflectors - F32 4-Series ...

T#:396084

Part#: BM-0994-A83

Ships in 7 Business Days

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

This product fits the following BMWs:
2014-2018 F32 428i 428i xDrive 430i 430i xDrive 435i 435i xDrive 440i 440i xDrive

Show More Show Less

E89 Z4 3D Design Front Lip Spoiler

T#:390450

Part#: 3101-18911

Ships in 3 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

This 3D Design front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality matte urethane, this part attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. Professional installation is recommended.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install to your factory bumpers & skirts to offer an understated, aggressive performance look.

Show More Show Less

AutoTecknic Dry Carbon Performante Front Aero Lip - F87 M2 Competitio...

T#:39261791

Part#: BM-0349

Ships in 7 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Upgrade your F87 M2 Competition with the AutoTecknic Carbon Performante Front Aero Lip and embrace the pinnacle of aerodynamic performance and visual allure, all backed by the superior quality of dry carbon fiber.

Show More Show Less

Suvneer R1 Style Carbon Fiber Front Lip - BMW E9X M3

T#:51285671

Part#: E9XM3R1CFLIP

Ships in 5 Business Days

$ 375.00 USD

Add to Wish List

Qty

$ 375.00 USD

Add to Wish List

The Suvneer E9X M3 R1 Style Front Lip is a functional aerodynamic component engineered to improve front-axle stability.

G87 M2 Carbon GT Front Lip

T#:27105166

Part#: AN-0402

Ships in 3 Business Days

$ 2,195.00 USD

Add to Wish List

Qty

$ 2,195.00 USD

Add to Wish List

Alpha-N has a reputation for pushing the boundaries of performance and style. With Alpha-N's connection to BMW Motorsport and their track record of producing high-quality carbon parts, their latest G8X M2 / M3 / M4 components are no exception. This one-piece GT front lip blends racetrack performance with everyday usability while employing similar styling to BMW's F87 M2 CS front lip. Construction is full pre-preg carbon fiber in a classic 2x2 weave.

Show More Show Less

AUTOTECKNIC Carbon Competition Extended-Kick Trunk Spoiler - G80 M3 ...

T#:21209820

Part#: ATK-BM-0284-EX

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Looking for a more aggressive style spoiler for your G80? Well, look no further for AUTOTECKNIC has you covered! Their carbon competition trunk spoiler is the perfect option if you are looking for a carbon spoiler addition that is high-quality, and aggressive but not over the top. Made using a vacuum seal process, you know you're getting maximum strength and rigidity out of this wing! With great looks, superior quality and easy installation, this trunk spoiler is a need for your ride. Get yours today! This spoiler is made with 100% carbon fiber and comes in a glossy carbon fiber finish. Before each new product is released to the public, they will first undergo rigorous tests and quality control to ensure the quality you'd expect. Just clean the installation surface of the trunk and add double-sided tape to the bottom surface, and the spoiler will be ready for installation. The installation will take no longer than 20 min as no drilling is required.

Show More Show Less

Suvneer MTech Style Diffuser - BMW F32/F33 4'

T#:51320840

Part#: F32MTDIFF435

Ships in 5 Business Days

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

The Suvneer F32/F33 435i M-Tech Style Diffuser is a high-fidelity aerodynamic trim piece manufactured using precision injection molding.

Slimmbones Front Bumper Lower Splitters - Polyurethane - E39 M5, 540i...

T#:9093969

Part#: SBFSP

Special Order: No Guaranteed ETA

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Add some aggression with the Slimmbones front splitter set! For over 20 years this family owned company has been using research and development to produce quality, classy yet aggressive after market parts for the E39. The BMW E39 540i M-Sport / M5 Bumper Splitters Feature: Left and right side splitter Built using sturdy polyurethane materials All hardware / tape included Designed and made in the USA

Show More Show Less

M Performance Style Carbon Fiber Rear Bumper Splitters - G82 M4 ...

T#:6212273

Part#: G82RRSPL-MP

Ships in 5 Business Days

$ 666.99 USD

Add to Wish List

Qty

$ 666.99 USD

Add to Wish List

M-Performance inspired carbon fiber rear bumper splitters for G82 M4. Direct bolt-on, no modification required. Composed of fiber reinforced polymer and glossy carbon fiber overlay

Suvneer CSL Designed Carbon Fiber Grille - PDC - BMW G22/G23 430i & M...

T#:51356043

Part#: G22CSLG

Ships in 5 Business Days

$ 854.00 USD

Add to Wish List

Qty

$ 854.00 USD

Add to Wish List

The Suvneer G22/G23 CSL Style Grille is a high-precision aerodynamic component designed for the G-chassis platform.

Autotecknic Glazed Black Painted Mirror Covers - A90 MkV Supra ...

T#:5175736

Part#: ATK-TO-0153-GB

Ships in 7 Business Days

$ 225.00 USD

Add to Wish List

Qty

$ 225.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed replacement glazed black painted mirror covers composed of 100% non-recycled plastic resulting in an extremely durable frame and an OEM fit. The covers are painted in a high quality gloss finish. Perfect for replacing lost, damaged, or faded covers.

Show More Show Less

M3 Style Rear Bumper Conversion - Quad Tips - E92/E93

T#:380357

Part#: E92M3RR2

Ships in 5 Business Days

Sale - Save 3% $ 743.99

This product was last offered at the strikethrough price on
06-13-2026

$ 721.67 USD

Add to Wish List

Qty

Sale - Save 3%

$ 743.99

This product was last offered at the strikethrough price on
06-13-2026

$ 721.67 USD

Add to Wish List

Add aggressive M styling with this replacement rear bumper. Comes in primer and is ready to be painted and change the demeanor of your BMW.

Autotecknic Carbon Fiber Trunk Lip Spoiler - F80 M3 / F30 3-SERIES ...

T#:21407085

Part#: ATK-BM-0260

Ships in 7 Business Days

$ 165.00 USD

Add to Wish List

Qty

$ 165.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may not have been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. This carbon fiber spoiler from Autotecknic was designed to give your 3-Series a more aggressive look that pulls the car's looks together. Made from rigorously tested dry carbon fiber, this spoiler is sure to stand the test of time! The installation will take no longer than 20 min. Absolutely no drilling is required. Double-sided tape is all that's required to install this spoiler!

Show More Show Less

StreetFighter LA BMW F30 Front Lip - FRP

T#:50521361

Part#: SFLAF30FRPFL

Ships in 7 Business Days

$ 640.00 USD

Add to Wish List

Qty

$ 640.00 USD

Add to Wish List

Enhance the appearance and aerodynamics of your F30 with this front lip

K1 Style Carbon Fiber Front Bumper Lip

T#:395080

Part#: E92MTKCFLIP

Ships in 5 Business Days

Sale - Save 3% $ 493.99

This product was last offered at the strikethrough price on
06-14-2026

$ 479.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 493.99

This product was last offered at the strikethrough price on
06-14-2026

$ 479.17 USD

Add to Wish List

Looking to change the character of your BMW? This carbon fiber front lip is a great way of getting it done. Carbon fiber means no need to paint, this lip will add a beautiful and sporty appearance without being overstated. Constructed of high-quality carbon fiber, this front lip is sure to impress in every way. Compatible with the following chassis's bumpers: E92 M Sport F30/31 M Sport F32/33 M Sport F36 M Sport / M3/M4 Bumper Conversion F22 M Sport Front Bumper

Show More Show Less

Autotecknic Replacement Carbon Fiber Fender Slats - E63 Coupe / E64 C...

T#:21407089

Part#: ATK-BM-0205

Ships in 7 Business Days

$ 165.00 USD

Add to Wish List

Qty

$ 165.00 USD

Add to Wish List

Give your 6-series this subtle visual upgrade with these Autotecknic carbon fiber fender trim pieces. Rigorously tested in all environments, these trim pieces are ready to give your car an aggressive look while maintaining rigidity! The surface is coated with a high gloss clear coat and the underlying carbon fiber overlay is laid on with meticulous care thus ensuring that each grill you receive are uniform and breathes the same quality as your BMW straight from the factory.

Show More Show Less

AutoTecknic Dry Carbon Performante Trunk Spoiler - F96 X6M | G06 X6 ...

T#:14419819

Part#: BM-0392

Ships in 7 Business Days

$ 385.00 USD

Add to Wish List

Qty

$ 385.00 USD

Add to Wish List

Dry carbon is the highest-quality version of carbon fiber products that are produced. Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Satisfy your carbon urge with this dry carbon trunk spoiler!

Show More Show Less

F06/F13 64-/650 M Sport 3D Design Carbon Fiber Front Lip Spoiler Set ...

T#:390456

Part#: 3101-20611

Ships in 3 Business Days

$ 2,595.00 USD

Add to Wish List

Qty

$ 2,595.00 USD

Add to Wish List

This 3D Design front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality carbon fiber, this part attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. Professional installation is recommended.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install to your factory bumpers & skirts to offer an understated, aggressive performance look.

Show More Show Less

EVO Aero Carbon Fiber Decklid Spoiler - M4

T#:396606

Part#: 4102BMV

Special Order: No Guaranteed ETA

$ 995.00 USD

Add to Wish List

Qty

$ 995.00 USD

Add to Wish List

Show off the racing heritage of your BMW with this Vorsteiner carbon fiber rear spoiler! This deck spoiler mounts to deck of your factory trunk to provide a cleaner and more agressive look.

Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. Their relentless pursuit of advancement and perfection is seen not only in their unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles.

Every Vorsteiner product is rigorously tested and must pass the highly detailed quality control before leaving the on-site Vorsteiner factory. Only after rigorous testing can a part be deemed worthy of the Vorsteiner name. Their clientele expect nothing less than perfection from Vorsteiner, and they welcome and exceed these expectations.

Vorsteiner's Autoclaved Pre-Preg Carbon Fiber structure gives their parts superior stiffness, aerospace strength & durability compared to traditional hand laid carbon fiber composites.

Show More Show Less

AUTOTECKNIC Dry Carbon Dynamics Trunk Lip Spoiler - A90 SUPRA 2020-UP...

T#:21045553

Part#: ATK-TO-0010

Ships in 7 Business Days

$ 435.00 USD

Add to Wish List

Qty

$ 435.00 USD

Add to Wish List

Dry carbon is the highest-quality version of carbon fiber products that are produced. Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Satisfy your carbon urge with this dry carbon trunk spoiler!

Show More Show Less

HARD Motorsport Fender Flares - BMW E36 Sedan, E36 "ti" Compact ...

T#:390230

Part#: FLARES.E36_4D

Ships in 10 Business Days

5% off MSRP $ 485.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 460.99 USD

Add to Wish List

Qty

5% off MSRP

$ 485.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 460.99 USD

Add to Wish List

The V1 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look.

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Allows fitment of up to 275/35/18 rubber on 18x9.5 ET35 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.

Product fits the following vehicles:

E36 BMW Sedan and "ti" models

Show More Show Less

ADRO F87 M2 AT-R1 Carbon Swan Neck GT Wing

T#:27572132

Part#: A14A30-1501

Ships in 3 Business Days

$ 2,990.00 USD

Add to Wish List

Qty

$ 2,990.00 USD

Add to Wish List

The rear of the M2 looks far more aggressive when you add this prepreg BMW F87 M2 AT-R1 Swan Neck GT Wing. Pair that with the durability and style of its real carbon fiber construction, and you’ll see just how big of a difference this wing makes on the M2.

Includes:

1 Carbon fiber wing
Aluminum bracket
Carbon fiber bracket holder
3M Tape and Install Hardware
Installation manual

Show More Show Less

AutoTecknic Carbon Competition Trunk Spoiler - F82 M4

T#:39092996

Part#: BM-0289

Ships in 7 Business Days

$ 350.00 USD

Add to Wish List

Qty

$ 350.00 USD

Add to Wish List

Upgrade your BMW F82 M4 with the AutoTecknic Carbon Competition Trunk Spoiler for a striking, motorsport-inspired look and improved aerodynamic efficiency.

AUTOTECKNIC Dry Carbon Performance Front Lip - G06 X6 M-SPORT ...

T#:21078408

Part#: ATK-BM-0308

Ships in 7 Business Days

$ 1,250.00 USD

Add to Wish List

Qty

$ 1,250.00 USD

Add to Wish List

With top-notch fry carbon construction, this front lip is sure to bring some new attention to your ride! Coated in a UV-resistant material, your front lip is protected from our sun's harmful rays which can easily fade and damage unprotected components. Change your cars look and get your AUTOTECKNIC lip today!

Show More Show Less

SQ-Aero Carbon Fiber Diffuser - G87 M2

T#:44224436

Part#: A-SQ-T-336

Ships in 7 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

Suvneer G22 Carbon Fiber Front Lip

T#:18401884

Part#: G22MTSUVLIP

Ships in 5 Business Days

$ 590.00 USD

Add to Wish List

Qty

$ 590.00 USD

Add to Wish List

Built with fiber-reinforced polymer and glossy carbon fiber coating, this front lip is designed to add aggression with exceptional durabiity.

Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish | BMW G80 ...

T#:37993409

Part#: DI-BM/CA/9/CF

In Stock at Vendor

$ 2,369.99 USD

Add to Wish List

Qty

$ 2,369.99 USD

Add to Wish List

Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish | BMW G80 M3 G82 M4

The Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish | BMW G80 M3 G82 M4 is a premium accessory designed to transform the look and performance of your BMW. Expertly hand-crafted in-house with ABE type approval, this chopped carbon fibre diffuser is engineered to accentuate the Akrapovič exhaust tailpipes, delivering a bold and sporty aesthetic. The matte finish adds a modern, sophisticated touch, while the lightweight construction ensures improved performance. Compatible with BMW G80 M3, G82 M4, xDrive, CSL, LCI, and M4 (G83) Competition models, this diffuser is a perfect blend of style and functionality.

Key Benefits:

Enhances the sporty and aggressive appearance of BMW G80 M3 and G82 M4
Showcases Akrapovič exhaust tailpipes for a standout design
Matte finish adds a modern and sophisticated aesthetic
Lightweight forged carbon fibre construction improves performance and durability
Hand-crafted with precision and ABE type approval for unmatched quality
Fits xDrive, CSL, LCI, and M4 (G83) Competition models for versatility

Upgrade your BMW with the Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish and enjoy a perfect blend of style, performance, and craftsmanship.

Show More Show Less

Adro Carbon Front Lip V2 - G87 M2

T#:49335160

Part#: A14A90-1203

Ships in 3 Business Days

$ 900.00 USD

Add to Wish List

Qty

$ 900.00 USD

Add to Wish List

Put the finishing touch on your ADRO G87 M2 Facelift Front Bumper with the V2 Carbon Fiber Front Lip — a next-level upgrade built to dial up the aggression. Bigger and bolder than the original V1, the V2 features extended dimensions and pronounced side blades at each corner, delivering a sharper, more dynamic, race-ready look that fits the G87 M2’s attitude perfectly. Made from high-quality carbon fiber, the V2 front lip blends standout styling with real performance intent. Designed and CFD tested for precise fitment, it bolts cleanly to the facelift front bumper while cranking up the M2’s visual presence. The sculpted profile isn’t just about looks, either — it helps manage airflow more effectively for added stability whether you’re attacking back roads or laying down laps at the track. With its extended profile and crisp, aggressive lines, the V2 front lip integrates seamlessly with the rest of the ADRO G87 aero lineup, giving your build a cohesive, purpose-built appearance from every angle. Why it belongs on your G87 M2: More aggressive V2 design with increased size over the original V1 Integrated side blades for added motorsport-inspired attitude High-quality carbon fiber construction with a show-ready finish CFD-tested design for optimized airflow and performance Engineered to complement the full ADRO G87 aero program Bottom line: if you want to push the aggression of your G87 M2 even further, the ADRO V2 Carbon Fiber Front Lip is the move. Bolt it on, step back, and let the front end do the talking.

Show More Show Less

Alpha-N F87 M2 Carbon GTS Hood

T#:27838488

Part#: AN-0032

Ships in 3 Business Days

$ 4,295.00 USD

Add to Wish List

Qty

$ 4,295.00 USD

Add to Wish List

The Alpha N hood for the BMW F87 M2 - GTS Style is made entirely of carbon fiber with an additional layer Kevlar on the inside, which serves the stability. Includes OE GTS hood vent and hood shocks. The Carbon Kevlar hood weighs about 6.5 kg and is thus significantly lighter than the originals (~ 18 kg).

Show More Show Less

F32 / F33 M4 Style Front Bumper

T#:1762255

Part#: F32M4FT-FOG

Ships in 5 Business Days

Sale - Save 3% $ 753.99

This product was last offered at the strikethrough price on
06-14-2026

$ 731.37 USD

Add to Wish List

Qty

Sale - Save 3%

$ 753.99

This product was last offered at the strikethrough price on
06-14-2026

$ 731.37 USD

Add to Wish List

Elevate your vehicle's appearance with the M4 style front bumper by ECS Tuning, designed to provide the sought-after aesthetic without factory installation. This bumper kit includes all necessary components for a hassle-free installation, enabling you to effortlessly achieve the desired M4 look.

Show More Show Less

ADRO Carbon Fiber Rear Winglets - BMW G22 M440i

T#:49335162

Part#: A14A80-1301

Ships in 3 Business Days

$ 650.00 USD

Add to Wish List

Qty

$ 650.00 USD

Add to Wish List

Experience the remarkable design of the BMW G22 M440i Carbon Fiber Rear Winglet!

Our hand-crafted piece is crafted from durable, premium carbon fiber, providing an upscale, aggressive aesthetic to enhance the rear of your vehicle.

This unique winglet stands out from the competition, offering BMW lovers the ultimate choice in car design!

Features:

1 Pair of Rear Winglets
3M Tape
Bolts/Screws
Installation Manual

Show More Show Less

ADRO Carbon Fiber Side Skirts - BMW G80 M3

T#:34214760

Part#: A14A50-1401

Ships in 3 Business Days

$ 2,490.00 USD

Add to Wish List

Qty

$ 2,490.00 USD

Add to Wish List

Often overlooked, side skirts can be the final touch that can pull an entire build together. The ADRO carbon fiber side skirt kit is designed to accent the factory body of the G80 M3 while flowing perfectly with the other carbon fiber pieces available for this platform. Featuring real carbon fiber construction and a design that was created to look great and increase downforce, this side skirt kit is everything the G80 needed and more.

Show More Show Less

Suvneer RS Carbon Fiber Trunk Spoiler - BMW F13 6' & M6

T#:51285692

Part#: F13CFVSPOILER

Ships in 5 Business Days

$ 203.00 USD

Add to Wish List

Qty

$ 203.00 USD

Add to Wish List

The Suvneer F13 RS Style spoiler is a lightweight aerodynamic add-on engineered to optimize the air departure angle at the rear of the vehicle.

Autotecknic Dry Carbon CRT Aero Lip - E90 M3 / E92 M3 / E93 M3 ...

T#:21472893

Part#: ATK-BM-0014

Ships in 7 Business Days

$ 460.00 USD

Add to Wish List

Qty

$ 460.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Designed and manufactured to the highest quality, Autotecknic did not skip a beat with this dry carbon fiber front lip. Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed autoclave to cure properly. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.

Show More Show Less

AutoTecknic Dry Carbon Competition Front Aero Lip - G30 5-Series M-Sp...

T#:39093013

Part#: BM-0320

Ships in 7 Business Days

$ 845.00 USD

Add to Wish List

Qty

$ 845.00 USD

Add to Wish List

The AutoTecknic Dry Carbon Competition Front Aero Lip for a distinctive appearance and improved aerodynamic efficiency.

URO Parking Aid Sensor

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:37858368

Part#: 66209270500

Ships in 1 Business Day

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Replacement Parking Distance Sensor – Provides reliable obstacle detection for enhanced parking accuracy and safety.

AutoTecknic Dry Carbon Side Mirror Wind Deflector Set - Gloss Finish ...

T#:51180362

Part#: ATK-BM-0719-G

Ships in 7 Business Days

$ 235.00 USD

Add to Wish List

Qty

$ 235.00 USD

Add to Wish List

Eliminate wind buffeting and enhance the exterior styling of your G87 M2 with AutoTecknic’s Dry Carbon Side Mirror Wind Deflectors. These wind deflectors are engineered for drivers who want improved cabin comfort and a motorsport-inspired look. Wind buffeting is a common issue when driving with the windows down at speed, creating uncomfortable turbulence inside the cabin. This becomes especially noticeable during spirited driving or track use. AutoTecknic’s wind deflectors are designed to redirect airflow away from the cabin, significantly reducing turbulence while sharpening the aggressive profile of your M2.

Show More Show Less

Autotecknic Replacement Glazing Black Fender Trims - F15 X5 / F85 X5M...

T#:21407047

Part#: ATK-BM-0078-GB

Ships in 7 Business Days

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

Made for a seamless and secure fit, these Autotecknic glazing black fender grilles are perfect if you desire a more aggressive look with a subtle upgrade! Package includes one pair of passenger and driver side direct OEM replacement fender trim.

Show More Show Less

Alpha-N G82 M4 Carbon Vented Front Fender Set

T#:27838489

Part#: AN-0635

Ships in 3 Business Days

$ 3,995.00 USD

Add to Wish List

Qty

$ 3,995.00 USD

Add to Wish List

Alpha-N has a reputation for pushing the boundaries of performance and style. With Alpha-N's connection to BMW Motorsport and their track record of producing high-quality carbon parts, their latest G8X M2 / M3 / M4 components are no exception. Anyone familiar with Alpha's carbon fenders for the latest G87-chassis M2 knows that their aero components are truly an exercise of form following function. As aero designs advance and motorsport applications make their way onto road cars, we once again see that Alpha-N is employing a proper functional design for airflow around the front of the car. Similar to their G87 fender set, Alpha's G82 M4 carbon fender set utilize similar upper fender louvers as well as side vent elements. As air flows into the left and right coolers in the M4's front bumper and into the wheel wells, it can then escape out of the front fender louvers as well as the side vents in front of the doors. The mass evacuation of air from inside the front fenders reduces air pressure, increasing downforce. Fender set construction is full pre-preg carbon fiber in a 4x4 weave with 2x2 upper vents. The Alpha-N G82 M4 Carbon Fender Set is as lightweight, stylish, and functional as they come; if you’re in the market for a fender set, there’s no better part. NOTE: FENDERS COME IN RAW CARBON FINISH.

Show More Show Less

AUTOTECKNIC Performance Dry Carbon Bumper Trim Set - F95 X5M ...

T#:21209814

Part#: ATK-BM-0229

Ships in 7 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

Made from high-quality dry carbon, this splitter set from AUTOTECKNIC was made with meticulous crafting and design to ensure a proper fit and finish leaving you with a stunning carbon result. Dry carbon is the highest-quality version of carbon fiber products that are produced. Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to cure appropriately. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Take your car's appearance to the next level and get yours today!

Show More Show Less

Carbon Fiber Front Lip - G30 5-Series

T#:6351037

Part#: G30MTSUVLIP

Ships in 5 Business Days

$ 630.00 USD

Add to Wish List

Qty

$ 630.00 USD

Add to Wish List

Carbon fiber front lip for the G30 5-Series Direct bolt on with self tapping screws. No modification required! Composed of fiber reinforced polymer and glossy carbon fiber overlay.

Project Cars

SELECT YOUR BMW

BMW Aero & Body

Sub-Categories

Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish | BMW G80 M3 G82 M4

Key Benefits:

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results