Get an edge at the racetrack or just add some more style to your BMW. The ADRO carbon fiber canards will be an easy-to-install modification for any M car.

For the most part, canards are universal, but ADRO specifically designed these to fit the styling of both the BMW F80 M3 and F82 M4. These canards are subtle, made from the highest-quality handcrafted carbon fiber, and are proven to increase downforce for better cornering performance.

This is one of the easiest ways to get both a cosmetic and a performance benefit in one product that doesn't require a ton of installation time. Get ready to dominate the street and the track with these carbon fiber front bumper canards for the BMW M3 and M4.

Includes:

• 2 Carbon fiber canards
• 3M Tape
• Installation manual

The Alpha-N G90 M5 sedan carbon rear trunk spoiler is designed to deliver superior aerodynamic performance and a sleek, sporty look. This spoiler lip not only enhances your vehicle's appearance but also provides functional benefits by reducing lift and increasing stability at high speeds.

Product Details:

2x2 weave; pre-preg construction

Gloss finish

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

This product fits the following BMWs:
2014-2018 F32 428i 428i xDrive 430i 430i xDrive 435i 435i xDrive 440i 440i xDrive

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2013 BMW E90 All non M submodels

BMW E90 E91 M3 Style Front Bumper Conversion

The BMW E90 E91 M3 Style Front Bumper Conversion offers an affordable way to achieve the iconic M3 look without the high OEM costs. Turner Motorsport presents this high-quality M3 replica front bumper, crafted to exact specifications from flexible ABS plastic, ensuring a factory-like appearance and perfect fit.

Benefits:

• Authentic M3 Style: Replicates the distinct M3 look for a sleek and aggressive appearance.
• High-Quality Construction: Made from flexible ABS plastic for durability and a precise fit.
• Complete Kit: Includes all necessary components for a seamless installation, with no need to source additional parts.
• Affordable Alternative: Provides a cost-effective solution to achieve the M3 aesthetic without compromising on quality.
• Turner Motorsport Assurance: Manufactured to the highest standards and rigorously tested for performance and fitment.

Includes:

• M3 Bumper Cover
• Lower Grille
• Fog Lights and Trim

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

Fits both MSport and non-MSport front bumpers. Will not fit ///M cars.

This product fits the following BMWs:
2012-2018 F06 640i 640i xDrive 650i 650i xDrive
2012-2017 F10 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive ActiveHybrid 5
2012-2018 F12 640i 640i xDrive 650i 650iX
2012-2018 F13 640i 640i xDrive 650i 650iX

This 3D Design front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality carbon fiber, this part attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. Professional installation is recommended.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install to your factory bumpers & skirts to offer an understated, aggressive performance look. 

Akrapovic Rear Carbon Wing - BMW G20 M330i M340i G80 M3

The Akrapovic Rear Carbon Wing - BMW G20 M330i M340i G80 M3 is a high-performance aerodynamic upgrade designed for BMW M3, M330, M340i, and other compatible models. Crafted from lightweight, handcrafted carbon fibre and finished with a high-gloss lacquer, this rear wing combines stunning aesthetics with motorsport-inspired functionality. The wing features a swan neck design mounted on CNC-machined aluminium brackets, optimized for the perfect balance between weight and performance. High-grade titanium reinforcements ensure structural stability at pivot points, while the aerofoil design maximizes downforce and minimizes drag. Fully adjustable to three levels, this wing allows drivers to fine-tune their setup for optimal performance. Approved with ABE and KBA 31882 type certification, it is both functional and road-legal. The understated Akrapovič monochrome logo on each side adds a touch of sophistication to this high-performance accessory.

Key Benefits:

• Lightweight, handcrafted carbon fibre construction for durability and performance.
• High-gloss lacquer finish for a sleek, premium appearance.
• Swan neck design with CNC-machined aluminium brackets for optimal weight-to-performance ratio.
• High-grade titanium reinforcements for enhanced structural stability.
• Motorsport-inspired aerofoil design maximizes downforce and minimizes drag.
• Fully adjustable to three levels for customizable performance.
• ABE approved with KBA 31882 type certification for road legality.
• Compatible with BMW G20 and G80 models.

Upgrade your BMW with the Akrapovic Rear Carbon Wing and experience the perfect blend of motorsport performance and premium design.

The BMW G20 M340i (Pre-LCI) Rear Diffuser offers an aggressive aesthetic to complete the rear-end of the vehicle. Crafted from premium carbon fiber, this original design is hand-made and offers the best in the market, making it the perfect choice for BMW fans. Your opponents will appreciate the look of the rear as they lose the race.

Includes:

• 1 Carbon Fiber Rear Diffuser
• 2 Diffuser Side Fins
• 3M Tape
• Hardware
• Installation manual

Is the rear end of your E90 boring you? Install a carbon fiber rear spoiler to instantly make your rear end more aggressive. Can be painted to match your vehicle or installed as-is. Install can be completed in minutes with double-sided adhesive.

Fits both LCI and Pre-LCI E90s.

This product fits the following BMWs:
2006-2011 E90 325i 325xi 328i 328xi 330i 330xi 335d 335i 335xi M3