Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2013 BMW E90 M3

Is the rear end of your F10 boring you? Install an M5 Style trunk spoiler to instantly make your rear end more aggressive. Can be painted to match your vehicle or installed as-is. Install can be completed in minutes with double-sided adhesive.

This product fits the following BMWs:
2010 - 2016 F10 5 Series Sedan 520i 523i 528i 528iX 530i 535i 535iX 550i 550iX M5 

Akrapovic Rear Carbon Wing - BMW G20 M330i M340i G80 M3

The Akrapovic Rear Carbon Wing - BMW G20 M330i M340i G80 M3 is a high-performance aerodynamic upgrade designed for BMW M3, M330, M340i, and other compatible models. Crafted from lightweight, handcrafted carbon fibre and finished with a high-gloss lacquer, this rear wing combines stunning aesthetics with motorsport-inspired functionality. The wing features a swan neck design mounted on CNC-machined aluminium brackets, optimized for the perfect balance between weight and performance. High-grade titanium reinforcements ensure structural stability at pivot points, while the aerofoil design maximizes downforce and minimizes drag. Fully adjustable to three levels, this wing allows drivers to fine-tune their setup for optimal performance. Approved with ABE and KBA 31882 type certification, it is both functional and road-legal. The understated Akrapovič monochrome logo on each side adds a touch of sophistication to this high-performance accessory.

Key Benefits:

• Lightweight, handcrafted carbon fibre construction for durability and performance.
• High-gloss lacquer finish for a sleek, premium appearance.
• Swan neck design with CNC-machined aluminium brackets for optimal weight-to-performance ratio.
• High-grade titanium reinforcements for enhanced structural stability.
• Motorsport-inspired aerofoil design maximizes downforce and minimizes drag.
• Fully adjustable to three levels for customizable performance.
• ABE approved with KBA 31882 type certification for road legality.
• Compatible with BMW G20 and G80 models.

Upgrade your BMW with the Akrapovic Rear Carbon Wing and experience the perfect blend of motorsport performance and premium design.

Acexxon's Honeycomb rear reflectors allow you to ditch the unattractive stock rear reflectors on your X5M, giving your vehicle a more sporty look. Goes great with black grilles!

Installation is very single. Pop the old ones out with a pry tool and then pop in your new Acexxon reflectors.

This set of Honeycomb rear reflectors from Acexxon is Gloss Black. If you are looking for matte black Acexxon rear reflectors for your X5M, here is the link.

This product fits the following BMWs:
F85 X5M

 Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F22  228i 228iX 230i 230iX M235i M235iX M240 M240iX

These 3D Design side skirts were designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from beautiful carbon fiber, they attach easily and accentuate your BMW's natural body lines, creating a high-class performance look. 

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

This front lip for your X5M or X6M features the same OEM fit and finish that can be expected of any RKP composite product.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i 
2007 - 2010 E60 528i 528xi 535i 535ix 550i
2005 - 2010 E60 M5

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F30 All 
2014-2017 BMW F32 All

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2001 - 2006 E46 M3