BMS Billet Clutch Delay Valve (CDV) Delete - E8X/E9X

T#:2513299

Part#: BMWCLUTCHVAVLE

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Enhance the performance of your stick shift BMW with the BMS clutch valve, a must-have upgrade for serious BMW enthusiasts. This high-performance replacement replaces the factory clutch delay valve, resulting in quicker shifts, longer clutch life, and improved 0-60 times. Designed with CNC machined precision, it installs quickly using factory-like connections with no modifications required. Made in the USA, this clutch valve is essential for maximizing the driving experience of your BMW.

Benefits:

Replaces factory clutch delay valve for improved performance
Quicker shifts and improved 0-60 times
Longer clutch life
Easy installation with factory-like connections
Made in the USA

Show More Show Less

Royal Purple Synchromax Manual Transmission Fluid - 1 Quart - BMW ...

T#:361158

Part#: 01512

Ships in 5 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Royal Purple® Synchromax® is recommended for manual transmissions that specify an automatic transmission fluid or other light-viscosity oil. It is also ideal for transfer cases and 2-cycle motorcycle gearboxes that specify light viscosity lubricants. Synchromax is formulated with Royal Purple’s synthetic, proprietary Synerlec additive technology, offering improved shift quality over a wide temperature range and reduced gear noise. Synchromax is fully compatible with all types of friction materials and offers excellent corrosion and oxidation protection without affecting the soft metals commonly found in manual transmission synchronizers.

Show More Show Less

E36 M3, MZ3 JB Racing Lightweight Aluminum Flywheel

T#:3771

Part#: 520-010-240

Ships in 9 Business Days

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe

Show More Show Less

Clutch Masters Clutch Pedal Bushing And Pin Kit - G8X M2/M3/M4 & MK5 ...

T#:22328087

Part#: CM-340-CPBK

Ships in 5 Business Days

$ 107.99 USD

Add to Wish List

Qty

$ 107.99 USD

Add to Wish List

This clutch pedal bushing kit for the BWW G80 M3, G82 M4, G87 M2, and the MK5 Toyota Supra replaces all of the factory plastic bushings that wear out, warp, and are just an overall sloppy and poor design, with the highest quality CNC machined billet pieces. Clutch Masters' kit includes two stainless steel bushings that replace the factory plastic bushings for the clutch pedal pivot point as well as a stainless steel clutch pedal pin that replaces the factory plastic pin. Also included in the kit are two billet aluminum pins that replace the factory plastic pins that hold the clutch master cylinder in place. Clutch Masters did a thorough article on the benefits of this kit and why you might be running into troubles with your factory setup that you can read here: https://clutchmasters.com/n-44-bmw-g80-m3-g82-m4-g87-m2-mk5-toyota-supra-6-speed-manual-clutch.html

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - 335 W/Thermostat ...

T#:21045476

Part#: BMS-335-TC-WTH

Back Ordered

$ 573.00 USD

Add to Wish List

Qty

$ 573.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2008-2013 E81 E82 E87 Coupe and Hatchback 135i 2008-2013 E88 Convertible 135i Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - E9X 335

T#:1347205

Part#: N54N55TRANSCOOL

In Stock

$ 444.99

This product was last offered at the strikethrough price on
06-16-2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2006-2011 E90 Sedan 335i/335ix 2006-2013 E90 E91 Sedan/Touring 335d (M57 diesel) 2006-2011 E91 Touring 335i/335ix 2011-2013 E92 Coupe 335is 2007-2013 E92 Coupe 335i/335ix 2006-2013 E93 Convertible 335i/335ix Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

E30 318i/is, E36 318i, Z3 1.9 JB Racing Lightweight Aluminum Flywheel...

T#:3769

Part#: 520-040-215

Back Ordered

11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Qty

11% off MSRP

$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9

Show More Show Less

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

T#:2801

Part#: 520-200-240

In Stock

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i

Show More Show Less

E46 M3 6MT JB Racing Lightweight Aluminum Flywheel

T#:302739

Part#: 520-180-240

Ships in 8 Business Days

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
2001-2006 E46 BMW M3 (6-speed manual only, not for SMG)

Show More Show Less

Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW...

T#:637547

Part#: BMS-DSBB-F

Back Ordered

Starting at $ 129.00 USD

Add to Wish List

Starting at $ 129.00 USD

Add to Wish List

The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.

Show More Show Less

SPEC Clutches Twin disc SS-Trim Clutch Kit - E60 M5, E63 E64 M6 SMG ...

T#:341298

Part#: SB60SST

Ships in 3 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

When adding performance-enhancing modifications to your vehicle, you need a way to get the power to the wheels. The SPEC clutch kit is perfect for preventing premature wear and slippage during heavy acceleration. This kit is designed to hold up to 710 ft. lbs. For vehicles with SMG transmission only

Show More Show Less

SPEC Clutch Super Twin Performance Clutch Kit - w/ Organic Trim - BMW...

T#:3457425

Part#: SB55SST

In Stock

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

SPEC Super Twin multi-disc clutch and flywheel kits are designed for street and track use in vehicles with extreme horsepower and torque (700 to 1500 lbs.-ft.). They offer near-stock drivability, tremendous life expectancy, a no shimming/setup bolt-in installation, and maintenance-free operation. With their all-billet construction, these assemblies are smooth and quiet. Super Twins are constructed with aircraft-grade aluminum and high-carbon billet steel milled to industry-leading .001 in. tolerances for perfect balance and actuation. Friction is provided by dampened, full-faced, carbon-graphite discs. Additional features of SPEC Super Twin multi-disc clutch and flywheel kits: Organic, fiber, and full-metallic versions are also available Flywheel and track-spec hardware are included in each kit *Rebuildable by SPEC or the end-user *Ideal for all types of use, including: street, drag racing, drifting, road racing, time-attack, pulling, and rally

Show More Show Less

Royal Purple Max-Gear Gear Oil - 75w90 - 1 Quart - BMW

T#:369661

Part#: 01300

In Stock

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Max Gear is a high-performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear—even under severe squeeze film conditions caused by extremely high loads, sudden shock loads, or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler, and longer without overhauls. It is non-corrosive to both ferrous and nonferrous metals.

Show More Show Less

F-Chassis B58 SPEC Billet Aluminum Flywheel

T#:7036582

Part#: SBB58A-2

In Stock

$ 749.00 USD

Add to Wish List

Qty

$ 749.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

E46 323/325/328/330 5-speed, Z3 2.3/2.8/3.0 JB Racing Lightweight Alu...

T#:4227

Part#: 520-140-240

In Stock

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (with 5-speed manual transmission)
2001-2005 E46 BMW 325xi 330xi
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

Show More Show Less

Clutch Masters Stage 1 Clutch Kit - FX100

For Vehicles with S5D250G-TAJS Transmission (5-Speed with 10-Spline Input Shaft)

T#:567239

Part#: 03005-HD00-D

In Stock

$ 522.99 USD

Add to Wish List

Qty

$ 522.99 USD

Add to Wish List

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.

FX100 (Stage I)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed organic friction material

Show More Show Less

Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:397226

Part#: SB531-2

Ships in 3 Business Days

10% off MSRP $ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD

Add to Wish List

Qty

10% off MSRP

$ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD

Add to Wish List

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

When it's time to replace your car's clutch, you face a crucial decision: upgrade or stick with stock? In many cases, upgrading is the preferred choice, especially when you pair the right clutch with a single mass flywheel. The secret to achieving the perfect blend of performance and driving experience lies in selecting a sprung hub clutch. This option allows you to enjoy the advantages of a single mass flywheel while eliminating issues like noise, vibration, and harshness (NVH), ensuring an outstanding driving performance.

Show More Show Less

Stage 2+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:211063

Part#: SB533H-2

In Stock

$ 839.00 USD

Add to Wish List

Qty

$ 839.00 USD

Add to Wish List

Tuning your N54/N55 with all of the bolt-on upgrades? Don't allow your clutch or flywheel let you down! The stock clutch is fine for a stock car or just a simple software upgrade. But anything more and it quickly becomes the weak link (especially with drag races or hard launches). The 135i/335i/535i/Z4 35i SPEC Stage 2+ clutch kit is perfect for owners who want a performance clutch that works great with simple bolt-on modifications and will have a minimum of downsides or trade-offs. SPEC has spent considerable time and effort on the 335i models to produce a performance clutch and flywheel package that holds up to track and drag strip demands but is also easy to live with for daily driving. This clutch kit is meant to be used only with a SPEC flywheel. Features: The flywheel has a peak torque rating of 545ft-lbs Limitations of the stock flywheel are eliminated Self-adjusting, like the factory design, and the engagement point can be adjusted Sprung hub clutch to be used with the single-mass flywheel with near-stock levels of noise, vibration, and refinement **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

SPEC Single Mass Steel Flywheel - BMW E9X 335 2007-2009 (up to 1/2009...

T#:341709

Part#: SB53S-2

Ships in 3 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

Spec SMF- STEEL (FOR USE WITH SPEC CLUTCH ONLY) N55

T#:597416

Part#: SB55S-2

Back Ordered

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

BMW E46 E39 Z3 Z4 Lightweight steel flywheel

T#:559369

Part#: FW-219-SF

In Stock

$ 566.99 USD

Add to Wish List

Qty

$ 566.99 USD

Add to Wish List

BMW E46 E39 Z3 Z4 Lightweight Steel Flywheel is an exceptional performance upgrade designed to enhance your driving experience by providing quicker revs and reducing turbo lag. Engineered by Turner Motorsport, this flywheel is constructed from high-quality 6061-T6 billet aluminum with a high-carbon steel replaceable friction surface, ensuring durability and improved acceleration.

Increased Acceleration: Reduced mass results in quicker engine revs and enhanced acceleration.
High-Quality Materials: Made from 6061-T6 aircraft-grade billet aluminum for exceptional strength and performance.
Durable Construction: Features a high-carbon steel replaceable friction surface and an OE steel ring gear secured by bolts.
Lifetime Warranty: Comes with a limited lifetime warranty, underscoring its reliability and long-term performance.
SFI Certification: Meets SFI Spec 1.1 or 1.2 standards, ensuring high-quality construction and safety.

This lightweight flywheel fits the following BMW models:

1999-2002 E46 BMW 323i, 323ci, 325i, 325ci, 328i, 328ci, 330i, 330ci (with 5-speed manual transmission)
2001-2005 E46 BMW 325xi, 330xi
1997-2002 Z3 BMW Z3 2.3, Z3 2.5i, Z3 2.8, Z3 3.0i

Show More Show Less

JB Racing Single Mass Lightweight Aluminum Flywheel - 6-speed - E46 3...

T#:3474

Part#: 520-190-240

Ships in 4 Business Days

$ 672.00 USD

Add to Wish List

Qty

$ 672.00 USD

Add to Wish List

This is a performance replacement for BMW Part # 21207533868 Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB Flywheel includes the pilot bearing mounted in the flywheel hub, just like the factory configuration.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.5lbs

This item fits the following BMWs:
2002-2005 E46 BMW 325i 330i (with 6-speed manual transmission)

Show More Show Less

BMS Differential Support Bracket Brace - BMW 135i / E9x 335i - Large ...

T#:1316771

Part#: E9XDIFFBRACE-LG

Ships in 1 Business Day

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

E30 325i, E34 525i (M20) JB Racing Lightweight Aluminum Flywheel (Rep...

T#:385699

Part#: 520-060-228

Ships on Sep 9, 2026

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991 E30 BMW 325i 325ic 325is (with single-mass flywheel)
1989-1990 E34 BMW 525i (with single-mass flywheel)

Show More Show Less

Stage 3 Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:394254

Part#: SB533-2

In Stock at Vendor

$ 799.00 USD

Add to Wish List

Qty

$ 799.00 USD

Add to Wish List

The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)

Show More Show Less

SPEC Billet Aluminum Single Mass Flywheel - E9X 335i, E82/88 135i, E6...

T#:387322

Part#: SB53A-2

In Stock

$ 579.00 USD

Add to Wish List

Qty

$ 579.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration.

Twin Disc Clutch & Flywheel Kit - F10 M5 F06 M6 S63 w/ Manual Transmi...

T#:593652

Part#: SBF10M5SST

Ships in 3 Business Days

$ 2,299.00 USD

Add to Wish List

Qty

$ 2,299.00 USD

Add to Wish List

If your clutch is slipping on your F10 M5 or F06/12/13 M6, it is time to upgrade! Luckily, SPEC clutch offers its very own high-performance clutches that are designed with power in mind. This Super Twin SST clutch and flywheel combo from SPEC is rated for 910ft lbs of torque and is perfect for either street or track use thanks to its IMSA inspired roots. Unlike your typical street and track clutch system, this kit from SPEC is also built with driveability in mind, remaining smooth and easy to use despite its increased torque capacity. Features: High capacity with smooth engagement and low pedal effort Billet construction with serviceable flywheel (the OE is not serviceable) Installs just like the OEM unit, despite all the differences Super Twin SST - Suitable for up to 910 ft-lbs of torque Super Twin ST Trim - Suitable for up to 1125 ft-lbs of torque Organic lining for a faster bed in than metallic units Included: SPEC Super Twin World Billet Steel Flywheel SPEC Super Twin World Clutch

Show More Show Less

Active Autowerke Differential Support Bracket (DSB) - E36

T#:397248

Part#: 13-004

Ships in 3 Business Days

5% off MSRP $ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD

Add to Wish List

Qty

5% off MSRP

$ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD

Add to Wish List

The main mounting bolt for the differential in the E36 is susceptible to shearing off during extreme driving conditions. This can cause internal damage to your diff, leaving you stranded at the track or on the side of the road. Active Autowerke's differential support bracket eliminates this issue forever in under an hour installation.

Previously used Active Autowerke Part Number AA-DSB-E36

This product fits the following BMWs:
1992-1999 E36 323i 325i 328i M3

Show More Show Less

Spec 12-16 BMW 335i (F30) Stage 2+ Clutch Kit

T#:597413

Part#: SB553H-2

In Stock at Vendor

$ 839.00 USD

Add to Wish List

Qty

$ 839.00 USD

Add to Wish List

BMS Differential Support Bracket Brace For G Chassis BMW/Supra ...

T#:49822560

Part#: BMSDSBBG

Ships on Sep 9, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

For G-Chassis BMW & A90/A91 Toyota Supra High torque loads, hard launches, and aggressive driving expose the factory differential mounting’s built-in compliance. Under power, the differential can shift excessively, resulting in wheel hop, inconsistent traction, and increased stress on drivetrain components—issues that become more pronounced on tuned or track-driven cars. The BMS Differential Support Bracket Brace corrects this weakness by reinforcing the differential mounting point and securely tying it to the subframe. By controlling unwanted movement, the brace improves rear-end stability and ensures power is transferred to the ground more efficiently. Why Upgrade? OEM differential mounts favor NVH reduction over control. As torque output increases, that compliance translates into drivetrain shock and lost traction. This brace stiffens the system where it matters most, reducing flex and improving load management under acceleration. Performance Benefits Improved launch consistency Significant reduction in wheel hop Increased rear-end stability under load More precise and predictable power delivery Engineered for Demanding Use Designed around factory mounting points, the BMS Differential Support Bracket delivers precise OE-level fitment with increased structural rigidity. Its robust construction resists deflection under high torque, while upgraded hardware provides greater clamping force for long-term reliability. Fully bolt-on for straightforward installation on both stock and modified vehicles. Key Features Reinforces rear differential mounting Limits differential movement under load Enhances traction and drivetrain response Heavy-duty construction for high-performance applications Bolt-on installation using factory locations Compatible with G-chassis BMW and A90/A91 Supra A focused drivetrain upgrade for drivers who demand consistency, control, and durability at higher performance levels.

Show More Show Less

Lightweight aluminum flywheel

T#:567160

Part#: FW-CM3-AL

Ships in 2 Business Days

$ 522.99 USD

Add to Wish List

Qty

$ 522.99 USD

Add to Wish List

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

Reduced mass equals increased acceleration
CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
CM uses an OE steel ring gear secured by bolts
CM offers a limited lifetime warranty
CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

This item fits the following BMWs:
2003-2005 E46 BMW 330i 330ci only for 6-speed manual transmission

Show More Show Less

E34 M5 JB Racing Lightweight Aluminum Flywheel

T#:3772

Part#: 520-090-240

Ships in 4 Business Days

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable.

Stock Flywheel Weight = 16.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1991-1995 E34 BMW M5

Show More Show Less

2002, E21 320i, E30 318i (M10) JB Racing Lightweight Aluminum Flywhee...

T#:3647

Part#: 520-110-215

Ships in 2 Business Days

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can be rebuilt too with a new clutch contact surface.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 16.5lbs
JB Flywheel Weight = 8lbs

This item fits the following BMWs:
1974-1976 2002 BMW 2002
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i

Show More Show Less

BMW E9X 335i BMS Differential Support Bracket Brace - Small Case ...

T#:1316770

Part#: E9XDIFFBRACE-SM

Back Ordered

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

BMW E9X 335i BMS Differential Support Bracket Brace - Small Case

The BMW E9X 335i BMS Differential Support Bracket Brace - Small Case is a high-performance upgrade designed to enhance the stability and durability of the differential mount. Turner Motorsport offers this precision-engineered brace to reduce flex and movement of the differential, ensuring improved power transfer and handling. Ideal for high-performance driving or track use, this brace helps maintain proper alignment and extends the lifespan of your differential components.

Benefits:

Enhances differential stability by reducing flex and movement
Improves power transfer and handling performance
Precision-engineered for a perfect fit and reliable performance
Ideal for high-performance driving and track use
Extends the lifespan of differential components
Made from high-quality materials for durability and strength

Show More Show Less

E30 M3 JB Racing Lightweight Aluminum Flywheel

T#:3768

Part#: 520-050-228

Ships in 4 Business Days

$ 630.00 USD

Add to Wish List

Qty

$ 630.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

Stock Flywheel Weight = 19.5lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1987-1991 E30 BMW M3

Show More Show Less

Clutch Masters Stage 3+ FX350 Clutch And Flywheel Kit

T#:567274

Part#: 03CM2-HDFF-AK

Ships in 3 Business Days

$ 1,193.99 USD

Add to Wish List

Qty

$ 1,193.99 USD

Add to Wish List

The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style.

The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs.

Show More Show Less

SPEC Stage 2+ Performance Clutch Kit - E46 M3 6MT

T#:340444

Part#: SB663H

Ships in 3 Business Days

Starting at $ 869.00 USD

Add to Wish List

Starting at $ 869.00 USD

Add to Wish List

The SPEC Stage 2 clutch is a premium, no compromises heavy-duty clutch upgrade for the 2001-2006 E46 M3 (manual transmission). Where the stock clutch is well-known for premature wear when driven hard and the factory dual mass flywheel is a known failure point, the SPEC clutch delivers with an over-engineered, performance-oriented clutch solution. The single carbon-Kevlar clutch is rated at 545 ft-lbs, more than enough for the naturally-aspirated S54 engines. A heavy-duty pressure plate and throw-out bearing complete the package.

The stock clutch in the S54 cars is not a terrible clutch and it is not under-rated (it's the same clutch disc used in the E39 M5). Our tuned M3 street and race cars have used the stock clutch with almost 400hp with only the occassional slip. But if the clutch is not grabbing like you want it to, or your tuning plans will include forced induction, a heavy-duty clutch is what will be needed. The SPEC Stage 2 clutch consists of a carbon-Kevlar friction material paired with a heavy-duty pressure plate. The clutch is stronger and grabs harder than the factory clutch. It has a much more robust feel and engagement. And with this specification the clutch will never be a weak point. The SPEC clutch is designed to work with the stock dual mass flywheel or the SPEC single-mass flywheel (steel or aluminum).

The real weak point in the driveline is in the flywheel. The stock dual-mass flywheel has rubber damper discs inside that will wear out over time. Heat and aggressive driving will accelerate their wear. Even if the clutch contact surface is not showing wear the inner rubber linings most likely are. On most clutch replacements we strongly advise getting a new flywheel at the same time to avoid duplicating the work. You can use the SPEC clutch with the stock or SPEC flywheel. Both the SPEC steel and aluminum flywheels are lighter than stock and will be single-mass. There will be a lot more noise and 'gearbox chatter' with the aluminum but the tradeoff is a much better acceleration and quicker revving. For daily driver commuting you will probably be happiest with the stock flywheel. For the ultimate in sports car feel use the aluminum. For the best of both worlds select the SPEC steel flywheel. It will not fail like the dual mass design but still has enough mass to dampen most engine vibrations.

SPEC Clutch is one of the premier clutch and flywheel suppliers to the tuner market. They are often found on the most highly tuned import and domestic vehicles. They are recent players in the German car community with a special focus on the newer turbo BMW models with high torque output. SPEC has been proven time after time to provide superior performance, drivability, and longevity to the most hardcare enthusiasts around the globe.

E46 M3 SPEC Clutch Kit contents:
+ carbon-Kevlar clutch disc
+ heavy-duty pressure plate
+ heavy duty billet throw-out bearing

This item fits the following BMWs:
2001-2006 E46 BMW M3 with 6 speed manual transmission

Show More Show Less

BMW N54 N55 B58 SPEC Stage 2 Performance Clutch Kit (for SPEC single-...

T#:341710

Part#: SB532-2

In Stock

$ 790.99 USD

Add to Wish List

Qty

$ 790.99 USD

Add to Wish List

SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding drivability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.

Kit includes:

Pressure plate
Clutch disc
Pilot bearing
Clutch Release Bearing
Clutch Alignment Tool
Clutch fork
Designed to be used with billet single mass flywheel

Show More Show Less

BMW E39 540i Stage 2 Clutch Kit - Clutch Masters

T#:568021

Part#: 03CM6-HD0F-X

In Stock

$ 733.99 USD

Add to Wish List

Qty

$ 733.99 USD

Add to Wish List

BMW E39 540i Stage 2 Clutch Kit is designed to enhance the performance and reliability of your BMW's clutch system. Ideal for enthusiasts looking to upgrade from the stock setup, this Stage 2 clutch kit delivers superior holding power and durability.

Increased Holding Capacity: Provides 70% more holding power compared to stock, accommodating higher torque and demanding driving conditions.
Heavy-Duty Construction: Features a reinforced pressure plate for added strength and longevity.
Enhanced Durability: Includes a sprung organic/fiber tough disc, ensuring long-lasting performance and smooth engagement.
Complete Kit: Comes with all necessary components, including a pressure plate, clutch disc, throw-out bearing, pilot bearing or bushing, alignment tool, and pressure plate bolts.
Flywheel Compatibility: Designed to work with a single mass flywheel (flywheel not included).

Turner Motorsport recommends the BMW E39 540i Stage 2 Clutch Kit for those seeking improved clutch performance and durability.

Show More Show Less

BMW F8X M3 M4 Stage 1 Clutch Kit - FX100 - Organic

T#:21407060

Part#: 03795-HD00-R

Back Ordered

10% off MSRP $ 1,300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,175.00 USD

Add to Wish List

Qty

10% off MSRP

$ 1,300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,175.00 USD

Add to Wish List

Upgraded clutch plate with organic rigid disc designed to be used with OEM flywheel. 70% Increased Holding Capacity The FX100 System uses the Power Plus I Heavy-Duty Pressure Plate with a steel backed organic friction material disc. This clutch is engineered for street driven vehicles and is specifically designed for extended wear and additional clamping force for the enthusiast who has added minor bolt-ons such as an exhaust and or intake system, up to 50hp NO2, or other non-forced induction external bolt ons. It features only slightly increased pedal pressure over factory, longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation. Heavy-Duty Disc Steel Backed Organic Friction Material Marcel Spring Wafer OEM or better Release Bearing Pilot Bearing (when applicable) Alignment Tool Instruction Card Decals *Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.

Show More Show Less

MINI Cooper S Clutch Kit - FX100 - Stage 1

T#:600127

Part#: 03635-HD00-SK

In Stock

9% off MSRP $ 1,485.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,350.00 USD

Add to Wish List

Qty

9% off MSRP

$ 1,485.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,350.00 USD

Add to Wish List

Upgrade Your Clutch with the Performance Clutch Installation Kit

Elevate your vehicle's clutch performance with the all-inclusive Performance Clutch Installation Kit, tailor-made for a stage one clutch upgrade. This kit incorporates a sturdy steel flywheel and Clutch Masters' FX100 (Stage I) components.

High-Performance Street System
70% Increased Holding Capacity Over Stock
Heavy-Duty Reinforced Pressure Plate
Hi-Leverage™ Pressure Ring Design
Sprung Hub/Cushioned Disc
Steel Backed Organic Friction Material

Experience improved clutch performance with the FX100, known for its robust design and enhanced holding capacity. This kit is perfect for street applications, providing reliable clutch performance. Included in the package are the Pressure Plate, Clutch Disc, Throw-out Bearing (if applicable), Pilot Bearing or Bushing (if applicable), and an Alignment Tool.

Show More Show Less

E39 540i 97-03 JB Racing Lightweight Aluminum Flywheel

T#:1339

Part#: 520-150-240

In Stock

$ 903.00 USD

Add to Wish List

Qty

$ 903.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 33.0lbs
JB Flywheel Weight = 13.0lbs

This item fits the following BMWs:
1997-2003 E39 BMW 540i

Show More Show Less

E24 633/635CSi/M6, E28 535i/M5 JB Racing Lightweight Aluminum Flywhee...

T#:3770

Part#: 520-080-240

Ships in 8 Business Days

$ 630.00 USD

Add to Wish List

Qty

$ 630.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 22.0lbs
JB Flywheel Weight = 8.5lbs

This flywheel includes the ignition trigger wheel.

This item fits the following BMWs:
1982-1987 E23 BMW 733i 735i
1982-1989 E24 BMW 633csi 635csi M6
1985-1988 E28 BMW 535i 535is M5

Show More Show Less

Stage 1 Clutch And Flywheel Kit E46 / E60 / E83

T#:583001

Part#: 03CM3-HD00-SK

Ships in 2 Business Days

9% off MSRP $ 1,212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,099.99 USD

Add to Wish List

Qty

9% off MSRP

$ 1,212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,099.99 USD

Add to Wish List

Enhance your vehicle's performance with the FX100 (Stage I) Performance Clutch Installation Kit, a comprehensive package perfect for a stage one clutch upgrade. This kit comprises all essentials, including a new single mass flywheel, and is designed with a dampened disc version for optimal functionality. Key features of the FX100 (Stage I) kit include:

High-performance street system for improved functionality
Increased holding capacity by 70% over stock for enhanced power transmission
Heavy-duty reinforced pressure plate for added durability
Hi-Leverage™ pressure ring design for optimal performance
Sprung hub/cushioned disc for smoother engagement
Steel-backed organic friction material for reliable grip
Single-mass steel flywheel, ensuring robustness and efficiency

Show More Show Less

Clutch Masters FX250 Stage 2 Clutch Kit

T#:567208

Part#: 03010-HD0F

Ships in 3 Business Days

$ 546.99 USD

Add to Wish List

Qty

$ 546.99 USD

Add to Wish List

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

Extra long life street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Rigid organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

Pressure Plate
Clutch Disc
Throw-out Bearing
Pilot Bearing or Bushing
Alignment Tool
Pressure Plate Bolts

This clutch kit does not include a flywheel.

Show More Show Less

Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:209171

Part#: SB533F-2

In Stock

$ 979.00 USD

Add to Wish List

Qty

$ 979.00 USD

Add to Wish List

The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)

Show More Show Less

Stage 1 Clutch Kit - FX100

T#:567161

Part#: 03CM3-HD00-X

Ships in 5 Business Days

$ 522.99 USD

Add to Wish List

Qty

$ 522.99 USD

Add to Wish List

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.

FX100 (Stage I)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed organic friction material

Fitment in following BMWs:This item fits the following BMWs:
2003-2005 E46 BMW 330i 330ci only for 6-speed manual transmission

Show More Show Less

Spec Aluminum Single Mass Flywheel - E9X 335 (01/2009+)

Designed for use with SPEC SB53X-2 clutch kits

T#:342330

Part#: SB53A-3

Back Ordered

$ 579.00 USD

Add to Wish List

Qty

$ 579.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration.

Stage 2 Clutch Kit - FX250 - Fiber Tough/Organic

T#:21407061

Part#: 03795-HD0F-D

Back Ordered

$ 1,291.99 USD

Add to Wish List

Qty

$ 1,291.99 USD

Add to Wish List

Upgraded clutch plate with Fiber Tough/steel backed organic dampened disc designed to be used with aftermarket single mass flywheels. 110% Increased Holding Capacity The FX250 System uses the Power Plus I Heavy-Duty Pressure Plate and utilizes a combination of our Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar without compromising the street friendly characteristics exhibited in the FX100 and FX200 series. Heavy-Duty Hybrid Disc with Fiber Tough Material on Pressure Plate side and Steel Backed Organic Friction Material on the Flywheel Side Fiber Tough and Steel Backed Organic Friction Material Heavy-Duty Sprung Hub (when applicable) Marcel Spring Wafer OEM or better Release Bearing Pilot Bearing (when applicable) Alignment Tool Instruction Card Decals *Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.

Show More Show Less

Clutch Masters FX250 Stage 2 Clutch Kit

T#:567404

Part#: 03148-HD0F-D

Ships in 8 Business Days

$ 1,291.99 USD

Add to Wish List

Qty

$ 1,291.99 USD

Add to Wish List

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

Extra long life street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

Pressure Plate
Clutch Disc
Throw-out Bearing
Pilot Bearing or Bushing
Alignment Tool
Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Drivetrain Parts

Sub-Categories

Benefits:

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

BMW E9X 335i BMS Differential Support Bracket Brace - Small Case

Benefits:

Upgrade Your Clutch with the Performance Clutch Installation Kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results