Find Parts That Fit Your Vehicle

BMW Drivetrain Parts

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

OEM ZF Automatic Transmission Service Kit - BMW 8HP F & G-Chassis ...
2X Entries For Our G87 M2 Sweepstakes! "For 8HP45Z, 8HP50Z, 8HP70Z, or 8HP75Z automatic transmissions"
ZF - Corporate Logo
T#:31191923
Part#: ZF8HPATSKT
In Stock
$ 287.99

This product was last offered at the strikethrough price on
04-03-2026

$ 256.99 USD
Free Shipping on orders $49 and up
$ 256.99 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM ZF Automatic transmission filter OEM ZF Oil Pan Gasket & Installation Hardware OEM ZF Drain plug with sealing washer OEM ZF Fill plug with sealing washer 7 Liters of ZF Lifeguard 8 Fluid NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorspot suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less
Castrol - Corporate Logo
T#:28271185
Part#: 15D99A
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up
High quality synthetic hypoid gear lubricant, suitable for conventional axles and axles with limited slip differentials. This oil is approved by BMW (M series) and Mercedes Benz AMG. Properties: Reduced axle noise and vibration. Excellent shear stability for consistent performance. Exceptional resistance to high temperatures, extending oil and axle life. Anti-wear properties, suitable for extreme loads. Good cold-weather fluidity for protection from start-up. Approvals: API GL-5 ​MB 235.61 ZF TE-ML 05C ZF TE-ML 12D ZF TE-ML 16G ZF TE-ML 18 ZF TE-ML 21C BMW LS Rear Axles
Show More Show Less
Castrol - Corporate Logo
T#:361227
Part#: 001989520310
In Stock
$ 41.59 USD
Free Shipping on orders $49 and up
Used In AMG and BMW Motorsport rear differentials

E36, E46, E39 Dinan Billet Short-Shifter Kit
Call In Or Chat For Best Price!
Not compatible with the 6-speed manual that was introduced for the 2004-06 model years on the 330i/ci (this includes all ZHP cars) nor the 2001-05 325xi/330xi.
Dinan - Corporate Logo
T#:391776
Part#: D550-1004
In Stock
Sale - Save 10% $ 254.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 229.45 USD
Free Shipping
Sale - Save 10%
$ 254.99

This product was last offered at the strikethrough price on
07-31-2026

$ 229.45 USD
Free Shipping
  • 20-25% shorter shifts
  • Counterbalanced for great shift feel
  • Stainless steel & aluminum construction
  • Rubber isolated for reduced NVH
  • Maintains stock shift feel with uprated stock-type bushings

The Dinan short shifter provides shorter shift throws with a crisper and more precise feel than a stock shifter. Instead of retrofitting a stock BMW lever, with all of its deficiencies, Dinan has engineered this billet aluminum shifting system. Special features engineered into this unit include a two piece fully isolated stick assembly, exclusive integrated and dampened pivot cup with self lubricating pivot ball, counter balanced to reduce effort and exclusive polymer "Iglide" T-500 lower pivot bushings that are impervious to contamination. Featuring an adjustable pivot, which allows this shifter to fit both standard and M Series applications. All of this combined with a simple straightforward installation provides a professional level shifter. Provides a 25% throw reduction in E36s, E39s and E46s and a 20% throw reduction in M3 and M5 applications.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty.

Show More Show Less

ZF Automatic Transmission Oil Pan With Transmission Filter - F22 F30 ...
2X Entries For Our G87 M2 Sweepstakes! For 8HP45Z, 8HP50Z, 8HP70Z, or 8HP75Z automatic transmissions
ZF - Corporate Logo
T#:403431
Part#: 24118612901
In Stock
$ 130.99

This product was last offered at the strikethrough price on
04-12-2026

$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
GA8HP 8 speed automatic transmission. Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This item fits the following BMWs: E71,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36
Show More Show Less
Genuine MINI - Corporate Logo
T#:513857
Part#: 83222220438
In Stock
5% off MSRP $ 26.29

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.05 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 26.29

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.05 USD
Free Shipping on orders $49 and up

Getrag - Corporate Logo
T#:641898
Part#: 28107850148
In Stock at Vendor
$ 150.99

This product was last offered at the strikethrough price on
05-07-2026

$ 134.99 USD
Free Shipping
$ 134.99 USD
Free Shipping
The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that lasts a lifetime. When you do decide to replace the transmission fluid, make sure you also replace your transmission filter to prevent any and all debris from getting pulled through and causing damage.
Show More Show Less
ZF 320 5-sp Manual Transmission Shaft Seal Set
2X Entries For Our G87 M2 Sweepstakes!
ZF - Corporate Logo
T#:16707419
Part#: ZFS5D320SEALKIT
In Stock
$ 59.99 USD
Free Shipping on orders $49 and up

Getrag - Corporate Logo
T#:641899
Part#: 28107842840
Ships in 5 Business Days
$ 121.99

This product was last offered at the strikethrough price on
05-07-2026

$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping
OE Getrag Repair Kit For Pressure Filter - This item fits the following BMW Chassis: E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F80 M3,F82 M4,F83

ZF - Corporate Logo
T#:596310
Part#: 24152333907
In Stock
$ 121.99 USD
Free Shipping on orders $49 and up
$ 121.99 USD
Free Shipping on orders $49 and up

For GA6HP19Z Automatic Transmissions

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

NOTE: This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type.

This kit contains:

(1) Oil Pan with Filter

(1) Oil Pan Gasket

(1) Filter O-Ring

(1) Drain Plug

Show More Show Less
Schaeffler - Corporate Logo
T#:3732
Part#: 31211468753
In Stock
$ 112.99

This product was last offered at the strikethrough price on
07-29-2026

$ 75.99 USD
Free Shipping
$ 75.99 USD
Free Shipping
This bearing requires that you use your existing ABS ring. This is a simple press fit. This is an OEM Wheel Bearing Hub Assemblies made by SKF or FAG. SKF and FAG are the leader in bearing technology. These wheel hubs are the best you can buy.
Show More Show Less
Front Differential Bushing - Priced Each
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362591
Part#: 33171090389
In Stock
$ 28.99

This product was last offered at the strikethrough price on
05-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up


Genuine MINI - Corporate Logo
T#:44767309
Part#: 83225B3AC81
In Stock
6% off MSRP $ 53.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 53.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.99 USD
Free Shipping on orders $49 and up
DCT 7 Speed transmissions fluid
Meyle Front Wheel Hub/Bearing Assembly - E30
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:370509
Part#: 31211131297
In Stock
$ 86.99 USD
Free Shipping on orders $49 and up
Includes wheel bearing
Getrag - Corporate Logo
T#:641901
Part#: 28107842838
Ships in 1 Business Day
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
Located in the transmission fluid pan - also called the sucking jet pump

JB Racing - Corporate Logo
T#:3771
Part#: 520-010-240
Ships in 9 Business Days
$ 602.00 USD
Free Shipping
$ 602.00 USD
Free Shipping
As Used on Project E36 M3
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe
Show More Show Less

Getrag - Corporate Logo
T#:641891
Part#: 23127501582
Ships in 6 Business Days
$ 27.99

This product was last offered at the strikethrough price on
05-07-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up
Found above the output shaft on the rear side of the transmission
Meyle Rear Differential Mount - E24, E28
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:392737
Part#: 33171129784
In Stock
$ 61.99 USD
Free Shipping on orders $49 and up
Replace damaged bushings to restore handling and performance to your vehicle

Automatic Transmission Service Kit - Lifeguard 6 Fluid
2X Entries For Our G87 M2 Sweepstakes!
ZF - Corporate Logo
T#:13332225
Part#: 24152333907KT
In Stock
$ 302.99

This product was last offered at the strikethrough price on
03-31-2026

$ 259.99 USD
Free Shipping on orders $49 and up
$ 259.99 USD
Free Shipping on orders $49 and up
Everything you need for a complete, hassle free transmission service straight from ZF.
ZF Transmission Sealing Sleeve
2X Entries For Our G87 M2 Sweepstakes!
ZF - Corporate Logo
T#:376243
Part#: 24347588725
In Stock
$ 32.27 USD
Free Shipping on orders $49 and up
Connects Mechatronik control assembly to transmission

JB Racing - Corporate Logo
T#:3769
Part#: 520-040-215
Back Ordered
11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
11% off MSRP
$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9
Show More Show Less

E82, E9X, E60 Dinan Billet Short Shift Kit
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:391777
Part#: D550-1005
In Stock
Sale - Save 10% $ 275.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.35 USD
Free Shipping
Sale - Save 10%
$ 275.99

This product was last offered at the strikethrough price on
07-31-2026

$ 248.35 USD
Free Shipping
  • 30% shorter shifts
  • Counterbalanced for great shift feel
  • Stainless steel & aluminum construction
  • Rubber isolated for reduced NVH
  • Maintains stock shift feel with uprated stock-type bushings

The Dinan short shifter provides shorter shift throws with a crisper and more precise feel than a stock shifter. Instead of retrofitting a stock BMW lever, with all of its deficiencies, Dinan has engineered this billet aluminum shifting system. Special features engineered into this unit include a two piece fully isolated stick assembly, exclusive integrated and dampened pivot cup with self lubricating pivot ball, counter balanced to reduce effort and exclusive polymer "Iglide" T-500 lower pivot bushings that are impervious to contamination. Featuring an adjustable pivot, which allows this shifter to fit both standard and M Series applications. All of this combined with a simple straightforward installation provides a professional level shifter. Provides a 30% throw reduction in E82 128i/135i, E9X 325i/328i/330i/335i, and E60 530i/545i/550i.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty.

Show More Show Less
Single Mass Flywheel Conversion Kit - N14 Engines
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:39599347
Part#: 874013
In Stock
$ 563.99

This product was last offered at the strikethrough price on
06-30-2026

$ 465.00 USD
$ 465.00 USD
Sealing Sleeve
2X Entries For Our G87 M2 Sweepstakes!
ZF - Corporate Logo
T#:594175
Part#: 24107536340
In Stock
$ 24.39 USD
Free Shipping on orders $49 and up
Found in the transmission housing


JB Racing - Corporate Logo
T#:2801
Part#: 520-200-240
In Stock
$ 714.00 USD
Free Shipping
$ 714.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i
Show More Show Less
JB Racing - Corporate Logo
T#:302739
Part#: 520-180-240
Ships in 8 Business Days
$ 602.00 USD
Free Shipping
$ 602.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
2001-2006  E46 BMW  M3 (6-speed manual only, not for SMG)
Show More Show Less
ZF - Corporate Logo
T#:31125616
Part#: 24007855263
Back Ordered
$ 149.99 USD
Free Shipping on orders $49 and up
This is a brand new automatic transmission filter service kit directly from ZF for the GAHP75 and GAHP76 transmissions found in many of the newer BMW M cars, including the G8X M2, M3, & M4, F90 M5, F91/92/93 M8, F97 X3M, F98 X4M, F85 X5M, and F86 X6M. This kit includes all of the basic components needed to service your transmission, other than the transmission fluid. Included: Oil Pan Gasket Oil Filter Drain & Fill Plugs Oil Pan Mounting Screws (Qty 13) As per ZF's recommendations, we suggest replacing your filter and changing your fluid every 50,000 miles. If your vehicle is modified and makes more power than stock, or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less

JB Racing - Corporate Logo
T#:4227
Part#: 520-140-240
In Stock
$ 602.00 USD
Free Shipping
$ 602.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (with 5-speed manual transmission)
2001-2005 E46 BMW 325xi 330xi
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
Show More Show Less

Schaeffler - Corporate Logo
T#:42301961
Part#: WH23581
In Stock
$ 114.99 USD
Free Shipping on orders $49 and up
When wheel bearings begin to fail, you normally will hear a squeaking or grinding noise, or sometimes feel a slight amount of vibration in the steering wheel. Be sure to replace these asap to prevent possible damage to the hub or steering issues. OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.
Show More Show Less
Genuine MINI - Corporate Logo
T#:54009
Part#: 31106773181
In Stock
10% off MSRP $ 33.45

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 33.45

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD
Free Shipping on orders $49 and up
Genuine MINI SCREW SELF-TAPPING

JB Racing - Corporate Logo
T#:3474
Part#: 520-190-240
Ships in 2 Business Days
$ 672.00 USD
Free Shipping
$ 672.00 USD
Free Shipping
This is a performance replacement for BMW Part # 21207533868 Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB Flywheel includes the pilot bearing mounted in the flywheel hub, just like the factory configuration.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.5lbs

This item fits the following BMWs:
2002-2005 E46 BMW 325i 330i (with 6-speed manual transmission)
Show More Show Less

Rear Differential Mount - Front Position
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594515
Part#: 33316792873
Ships in 2 Business Days
$ 41.99

This product was last offered at the strikethrough price on
05-07-2026

$ 40.99 USD
Free Shipping on orders $49 and up
$ 40.99 USD
Free Shipping on orders $49 and up
Over time bushings deteriorate and become ineffective. Replace them to reduce noise and harshness. Priced Each. Two required for complete service.

MTC - Corporate Logo
T#:4145
Part#: 26121209532
In Stock at Vendor
$ 27.99

This product was last offered at the strikethrough price on
05-07-2026

$ 26.99 USD
Free Shipping on orders $49 and up
$ 26.99 USD
Free Shipping on orders $49 and up
Replacement center support bearing for the driveshaft. Often the cause of annoying vibrations and clunking noises during take-offs. Often the cause of annoying vibrations and clunking noises during take-offs.

This item fits the following BMWs:
1982-1983 E28 BMW 524td 528e 533i
1983-1984 E24 BMW 633csi - Automatic Transmission
Show More Show Less
Getrag - Corporate Logo
T#:641878
Part#: 23117512866
Ships in 1 Business Day
$ 76.96

This product was last offered at the strikethrough price on
05-29-2026

$ 54.98 USD
Free Shipping
$ 54.98 USD
Free Shipping
Located on the input shaft of your manual S6S420G transmission. We recommend replacing this tube every time you replace your clutch.
JB Racing - Corporate Logo
T#:3768
Part#: 520-050-228
Ships in 4 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

Stock Flywheel Weight = 19.5lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1987-1991 E30 BMW M3
Show More Show Less


Schaeffler - Corporate Logo
T#:42301960
Part#: WH22761
Back Ordered
$ 218.99 USD
Free Shipping on orders $49 and up
When wheel bearings begin to fail, you normally will hear a squeaking or grinding noise, or sometimes feel a slight amount of vibration in the steering wheel. Be sure to replace these asap to prevent possible damage to the hub or steering issues. OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.
Show More Show Less
Meyle CV Boot Repair Kit - Inner - E36
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:592404
Part#: 33219067819
Ships in 1-2 days
$ 70.43 USD
Free Shipping on orders $49 and up
Replace torn CV boots and save CV joints
JB Racing - Corporate Logo
T#:385699
Part#: 520-060-228
Ships on Sep 1, 2026
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991  E30 BMW  325i 325ic 325is (with single-mass flywheel)
1989-1990  E34 BMW  525i (with single-mass flywheel)
Show More Show Less

Meyle - Corporate Logo
T#:29234322
Part#: 3001360302
Ships on Oct 29, 2026
$ 57.99 USD
Free Shipping on orders $49 and up
BMW claims their transmission fluid to be a "lifetime" fluid, however is recommended to be changed every 60,000 miles to ensure a longer transmission life. Though not exposed to the same level of heat and contamination as engine oil, transmission oil still breaks down over time due to heat and becomes contaminated as your transmission wears. Old contaminated oil can lead to excessive wear and tear on sensitive transmission components which could lead to slow shifting, slips, and even complete failure. This is also true for the transmission filter. The filter removes metal particles from the transmission fluid and eventually begins to clog, preventing fluid from passing through the filter easily. This leads to excessive wear and a reduced transmission lifespan if not changed. Not sure if this kit is right for your BMW? Contact our sales staff with your VIN to confirm the exact part you need.
Show More Show Less

Single Mass Flywheel Conversion Kit
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:39363094
Part#: 874015
Back Ordered
$ 649.99

This product was last offered at the strikethrough price on
06-30-2026

$ 491.00 USD
$ 491.00 USD
Meyle Driveshaft Center Support - E36, E39, Z3
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:359503
Part#: 26121226731
Back Ordered
$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up
Replacement center support bearing for the driveshaft from Meyle. Often the cause of annoying vibrations and clunking noises during take-offs.

This item fits the following BMWs:
Manual Transmission
1992-1998  E36 BMW  318i 318is 318ic 323is 323ic 325is 325ic 328i 328is 328ic
12/94-1995  E36 BMW  325i Sedan
1997-2003  E39 BMW  525i 530i

Automatic Transmission
1992-1998  E36 BMW  318ti 323is 323ic 328i 328is 328ic
1998-2003  E39 BMW  525i 528i 530i
1999-2002  Z3 BMW  Z3 2.5i Z3 3.0i
Show More Show Less

Genuine MINI - Corporate Logo
T#:49039
Part#: 21517570228
In Stock
8% off MSRP $ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping
8% off MSRP
$ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping
Genuine MINI CLUTCH RELEASE BEARING
Genuine MINI - Corporate Logo
T#:194627
Part#: 21526863945
In Stock
8% off MSRP $ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up
Genuine Bmw Clutch Line, Transmission

BMW Automatic Transmission Service Kit - Level 2 - Lifeguard 6 ATF ...
2X Entries For Our G87 M2 Sweepstakes! GA6HP26Z Service Kit
ZF - Corporate Logo
T#:13102202
Part#: 24152333903KT4
In Stock
$ 326.99

This product was last offered at the strikethrough price on
03-31-2026

$ 277.99 USD
Free Shipping on orders $49 and up
$ 277.99 USD
Free Shipping on orders $49 and up

BMW Automatic Transmission Service Kit - Level 2 - Lifeguard 6 is a comprehensive service solution that includes everything needed to effectively maintain and service your BMW's transmission using high-quality ZF components and fluid. While BMW suggests that the ZF transmission utilizes a lifetime fluid, it’s important to understand that “lifetime” refers to the warranty, not the transmission's operational lifespan. Over time, the fluid degrades, becoming less effective at transferring heat and lubricating internal components. This degradation can lead to premature wear, resulting in louder operation, harder shifts, and potentially severe internal damage.

ZF recommends service intervals of 50,000 miles or 8 years—whichever comes first—for 6HP transmissions. By using OEM ZF components in this kit, BMW owners can ensure that only the highest quality factory parts and fluids are used, keeping the transmission running smoothly for years to come.

Benefits:

  • Comprehensive Kit: Contains all necessary components for a complete transmission service, ensuring an efficient and thorough maintenance process.
  • High-Quality OEM Parts: Includes ZF components, guaranteeing compatibility and superior performance.
  • Prevents Premature Wear: Regular service helps avoid costly repairs by maintaining fluid integrity and component lubrication.
  • Improves Performance: Enhanced fluid conditions contribute to smoother shifting and quieter operation.
  • Recommended Service Intervals: Follows ZF’s guidelines for optimal maintenance, promoting longevity in your BMW’s transmission.
Show More Show Less

Getrag - Corporate Logo
T#:641649
Part#: 23117545082
Ships in 1 Business Day
$ 58.00

This product was last offered at the strikethrough price on
05-07-2026

$ 51.99 USD
Free Shipping on orders $49 and up
$ 51.99 USD
Free Shipping on orders $49 and up
This seal located on both the right and left sides of the GS6-53BG/DG transmission outside of the bell housing, sealing both of the output shafts to the transmission.
Genuine MINI - Corporate Logo
T#:49914
Part#: 23117568467
In Stock
$ 78.99 USD
Free Shipping on orders $49 and up
Genuine MINI CLUTCH REL.FORK LEVER
JB Racing - Corporate Logo
T#:3772
Part#: 520-090-240
Ships in 7 Business Days
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable.

Stock Flywheel Weight = 16.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1991-1995 E34 BMW M5
Show More Show Less


JB Racing - Corporate Logo
T#:3647
Part#: 520-110-215
Ships in 2 Business Days
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can be rebuilt too with a new clutch contact surface.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 16.5lbs
JB Flywheel Weight = 8lbs

This item fits the following BMWs:
1974-1976 2002 BMW 2002
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i
Show More Show Less
Genuine MINI - Corporate Logo
T#:522025
Part#: 83222355599
Ships in 3 Business Days
9% off MSRP $ 74.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 74.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up