Find Parts That Fit Your Vehicle

Home
Drivetrain

BMW Drivetrain Parts

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW F10 M5, F...

T#:6061697

Part#: BMW08A0

In Stock

Sale - Save 19% $ 299.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 242.84 USD

Add to Wish List

Sale - Save 19%

$ 299.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 242.84 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Stage 3 MINI Cooper 2.0L Clutch Kit - FX300

T#:54388463

Part#: 03460-HDTZ-R

Ships in 7 Business Days

$ 817.99 USD

Add to Wish List

Qty

$ 817.99 USD

Add to Wish List

Ready to step up to serious power? If your factory clutch is slipping under pressure, it’s time for the ultimate drivetrain upgrade. The Clutch Masters FX300 (Stage 3) Performance Clutch Installation Kit is engineered for high-performance street applications where maximum holding capacity and daily drivability must coexist.

Show More Show Less

Billet Diff Lock Down Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:21176906

Part#: VTT-A9X-DLD

In Stock

Sale - Save 7% $ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

Sale - Save 7%

$ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

VTT noticed a hole in the A9X/Z4 market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. Vargas went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced. You will need a Riv-nut tool to install the Riv-nuts as one is not included. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less

Driveshaft Center Support Bearing Carrier - Track Bushings

T#:6061652

Part#: BMW08A0-T

Ships in 4 Business Days

Sale - Save 15% $ 299.99

This product was last offered at the strikethrough price on
05-15-2026

$ 255.67 USD

Add to Wish List

Qty

Sale - Save 15%

$ 299.99

This product was last offered at the strikethrough price on
05-15-2026

$ 255.67 USD

Add to Wish List

The stock center support bearing carrier utilizes an extremely thin layer of rubber to secure the driveshaft, allowing for minimal movement to effectively insulate the cabin from noise, vibration, and harshness (NVH). However, this design is less effective at maintaining proper bearing alignment under heavy loads. Over time, it allows the bearing to gradually sag, disrupting the driveshaft alignment and introducing play in the driveline during gear shifts and throttle application. The original equipment manufacturer (OEM) rubber bushing has a tendency to sag, become brittle, and eventually deteriorate, resulting in dry rot and cracking. Even in well-maintained vehicles, the stock bushing can develop cracks in as little as 5-10 years. When the bushing loses its integrity, it can lead to pronounced vibrations, clunking noises, and increased stress on the bearing. Adding to the challenge, the stock carrier is permanently molded onto the center support bearing, making replacement a difficult task that typically necessitates specialized tools.

Show More Show Less

Stage 5 MINI Cooper S Clutch Kit FX500 03050-HDB6-R

T#:54388361

Part#: 03050HDB6R

Ships in 3 Business Days

$ 571.99 USD

Add to Wish List

Qty

$ 571.99 USD

Add to Wish List

When you're pushing your BMW or MINI past factory limits, your stock clutch simply won't hold the power. Whether you need a crisp, high-performance street setup or a brutal, track-ready clamping force, these kits deliver the engagement and holding capacity required for serious driving.

Show More Show Less

Vargas Front Differential Bushing Reinforcement Insert Kit - Rear - B...

2X Entries Into Our F80 M3 Sweepstakes

T#:52129737

Part#: G8XDIFFINSTRO

Ships in 10 Business Days

$ 132.99 USD

Add to Wish List

Qty

$ 132.99 USD

Add to Wish List

The G8X Rear Billet Diff Insert Kit is a precision-machined reinforcement component that installs directly into the rear differential bushing.

Billet Differential Lock Down Kit - Clear

2X Entries Into Our F80 M3 Sweepstakes

T#:58782359

Part#: G8X-LOCKDOWN-CLR

Ships in 10 Business Days

$ 739.99 USD

Add to Wish List

Qty

$ 739.99 USD

Add to Wish List

This kit provides the reinforcement BMW intended but never fully realized in the factory design.

Vargas Billet Differential Lock Down Kit - Black - BMW G8X

2X Entries Into Our F80 M3 Sweepstakes

T#:52129738

Part#: G8X-LOCKDOWN-BLK

Ships in 10 Business Days

$ 739.99 USD

Add to Wish List

Qty

$ 739.99 USD

Add to Wish List

This black-anodized kit provides the reinforcement BMW intended but never fully realized in the factory design.

Vargas Front Differential Bushing Reinforcement Insert Kit - Front - ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52129733

Part#: G8XDIFFINSFRT

Ships in 10 Business Days

$ 132.99 USD

Add to Wish List

Qty

$ 132.99 USD

Add to Wish List

The Vargas Turbo Technologies Front Diff Reinforcement Kit is a vital upgrade for high-horsepower S58-powered vehicles.

Toyota Supra A90/A91 Driveshaft Center Support Bearing Carrier Upgrad...

T#:56471630

Part#: TYT01A0-B

Ships in 8 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Select Vehicle

Purpose

Performance (10)

Category

Home

Drivetrain

Brand

View All Brands

Price

Special Offers

Shipping