Replacement pad wear sensor, typically replaced when changing brake pads. If your brake lining warning is activated, the sensor will need to be replaced.

BMW E60 E63 E64 Rear Brake Pad Sensor. Only one required for rear. Alternate part number 34356789493.

This item fits the following BMWs:
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2004+ E63 BMW 645ci 650i M6

Brake pad wear sensors are a convenient part of the braking system, notifying the driver of when the material on the brake pads are getting low and need to be serviced. Unfortunately it is common in custom or upgraded braking systems that the pad wear sensor is non-existent or does not mate properly with the connector on your vehicle, leaving you with a brake pad wear warning every time you start your vehicle.

ECS Tuning has developed this direct-fit Brake Pad Wear Sensor Bypass to alleviate this issue. This sensor bypass will trick the vehicle's electronics into thinking that the brake pads have adequate pad material to keep the dashboard warning from appearing. No more unnecessary warnings when installing a big brake kit or your own custom setup. This bypass is a plug-and-play component that requires no modifications so you can revert back to your OEM setup if necessary.

Some vehicles may be equipped with two front brake pad wear sensors, or a front and rear sensor, please be sure to double check the required quantity for your vehicle before placing an order.

*During installation, make sure to clean the mated female connector on your vehicle of any dirt or debris to ensure that the Brake Pad Wear Sensor Bypass is engaged securely.

MINI R Chassis BlueStuff Performance Racing Brake Pad Set

MINI R Chassis BlueStuff Performance Racing Brake Pad Set is the ultimate upgrade for Mini enthusiasts looking for superior braking performance on the track. Specifically designed for MINI R Chassis models, these brake pads deliver unmatched stopping power and fade resistance. With their advanced friction materials and high-quality construction, they provide consistent braking performance even under extreme conditions.

• Provides superior braking performance on the track
• Specifically designed for MINI R Chassis models
• Delivers unmatched stopping power and fade resistance
• Advanced friction materials ensure consistent braking performance
• High-quality construction for durability and reliability

Upgrade your Mini's braking performance with the MINI R Chassis BlueStuff Performance Racing Brake Pad Set and dominate the track with confidence.

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Replacement pad wear sensor, typically replaced when changing brake pads. If your brake lining warning is activated, the sensor will need to be replaced.

E46 330/M3 (also fits 325Xi) Front Brake Pad Sensor. Only one sensor required for front. 

This item fits the following BMWs:
1999-2005 E46 BMW 325xi 330i 330ci 330xi M3

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Replacement pad wear sensor, typically replaced when changing brake pads. If your brake lining warning is activated, the sensor will need to be replaced.

Fits the following vehicles:

2015+ F48 BMW

Replacement pad wear sensor, typically replaced when changing brake pads. If your brake lining warning is activated, the sensor will need to be replaced.

E39 Rear Brake Pad Sensor. Only one required for rear brakes. Does not fit touring (wagon.)

This REAR brake pad wear sensor fits the following BMWs:
1997-2000 E39 sedan - 528i, 540i (no wagons)
2001-2003 E39 sedan - 525i, 530i, 540i (no wagons)
2000-2003 E39 M5 sedan

MINI F55 to F57 Brake Pad Sensor - Front

The MINI F55 to F57 Brake Pad Sensor - Front acts as a critical wear indicator for your brake pads. This sensor alerts drivers when the brake pads are worn down and need replacement, helping to prevent potential damage and ensure safety. When the brake pads deteriorate, the sensor wears down and eventually triggers a warning light, indicating that the sensor must be replaced.

• Essential Wear Indicator: Alerts drivers when brake pads are worn and need replacement.
• Prevents Damage: Helps prevent potential brake system damage by providing early warnings.
• Maintenance Reminder: Triggers a warning light when brake pad replacement is needed.
• Replacement Recommendation: Should be replaced each time brake pads are replaced.
• Single Sensor Required: One sensor is needed for the front brake system.