This product was last offered at the strikethrough price on
08-26-2026
This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with significant load increase over stage 1,2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20%-25%. Discs are assembled with heat-treated wear resistant hubs; drive plates and springs for high load transfer and dependable operation. The sprung centers on the disc in conjunction with the marcel fin between the linings create a dual dampening effect that simulates O.E. start performance. A Performance Organic friction material with a high metal content increases torque and RPM capability and maintains low operating temperatures which reduces wear and glazing.
Stage 3 Daily Clutch Kits:
Recommended usages are daily, spirited street and occasional track
Conservatively rated to hold 500lbs/ft of torque
Featuring a solid-hub center section for use with an OE dual-mass flywheel
This kit from Valeo is a simple way to easily convert your stock dual mass flywheel clutch system to a single mass system.
Dual mass flywheels allow for fluid-feeling clutch engagements and offer a more luxurious feel than single-mass flywheels. However, with these benefits come significant drawbacks. Why convert from a dual-mass flywheel to a single-mass flywheel?
Cost: Dual-mass flywheels are expensive, with the cost of replacement often times being double or triple than that of converting to a single-mass flywheel.
Serviceability: Single-mass flywheels can be resurfaced, eliminating the need to replace with the next clutch service. - something that is not recommended with dual-mass flywheels, as they contain a rubber section that is more failure-prone in high mileage application.
Simplicity: Single-mass flywheels lack the complexity of dual-mass flywheels, making them inherently more reliable. Dual-mass flywheels contain a rubber damper or hub that will, like all rubber components, wear out with time.
Pedal Feel: Many enthusiasts prefer to eliminate BMW's "Self Adjusting Clutch", which has been known to provide an unpredictable, inconsistent engagement point.
Driveability: Valeo's conversion kit has been designed to maintain nearly identical clutch and flywheel weight, ideal for keeping the clutch quiet and easy to drive.
Kit contents:
Single-mass flywheel
Non-Self Adjusting Clutch and pressure plate
Throw out bearing
Pressure plate bolts
Flywheel bolts
Clutch alignment tool
Upgrade your Mini's clutch system with the MINI R52 R53 Clutch Kit For Solid Flywheel Conversion. Specifically designed for solid flywheel conversion, this clutch kit ensures optimal performance and durability for your Mini. Say goodbye to clutch issues and enjoy smoother engagements and reliable performance on the road.
Upgrade your Mini's clutch system with this Performance Clutch Installation Kit, designed for a stage one clutch upgrade. This kit includes everything you need for installation, featuring a dampened disc version suitable for use with a single mass flywheel. The FX100 (Stage I) clutch system offers high performance for street use, with a holding capacity 70% over stock for enhanced durability. Equipped with a heavy-duty reinforced pressure plate and Hi-Leverage™ pressure ring design, this kit ensures reliable clutch engagement and longevity. The included sprung hub/cushioned disc and steel-backed organic friction material provide smooth operation and consistent performance. Please note that this kit does not include a flywheel.
Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.
FX250 (Stage II)
All Clutch Masters clutch kits come complete with:
This clutch kit does not include a flywheel. Requires use of single mass flywheel
When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.
Included in this kit:
Fits the following BMWs:
E46 BMW M54 325i/Ci, 330i/Ci (up to 03/2003)
Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.
FX250 (Stage II)
All Clutch Masters clutch kits come complete with:
Fitment in following BMWs:This item fits the following BMWs:
2003-2005 E46 BMW 330i 330ci only for 6-speed manual transmission
BMW E60 E9X XACT Flywheel Streetlite is an advanced performance flywheel engineered to offer substantial improvements over stock components. This lightweight flywheel is designed for durability and enhanced performance, making it an excellent choice for both street driving and drag racing.
Upgrade your BMW with the BMW E60 E9X XACT Flywheel Streetlite for enhanced performance and durability.
Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.
ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.
This clutch kit is their most popular and features a Heavy Duty pressure plate and a Performance Street sprung clutch disc.
**Must be used with an ACT XACT Streetlite Flywheel, Part number: 600315**
The heavy duty pressure plate included offers a 20-50% clamp load increase, stock-moderate pedal feel, and heat treated diaphragms for increased strength and performance.
Next in this kit is the Performance Street clutch disc. This is the most popular sprung clutch disc and features high quality organic friction material with a high copper content for improved heat transfer and a steel backed lining for increased strength in burst load circumstances. This organic clutch disc has a significantly higher torque capacity than a stock disc but still retains a long life span and operates quietly and reliably.
Clutch Kit Specifications:
Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.
FX250 (Stage II)
All Clutch Masters clutch kits come complete with:
This clutch kit does not include a flywheel. Requires use of single mass flywheel
SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding driveability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with a heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.
Kit includes:
Pressure plate
Clutch disc
Pilot bearing
Clutch Release bearing
Clutch Alignment tool
Clutch fork
Designed to be used with a stock dual mass flywheel or any billet single mass designed for a factory style clutch.
600315 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Feel: Noticeably improved engine response and acceleration, OE to mild gear rattle;
Life: Heat-treated forging for strength and toughness, induction-hardened ring gears for maximum life;
Quality: One piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears;
Recommended Use: Recommended for street and race use;
ACT Difference: Forged, CNC machined and dynamically computer balanced for smooth high RPM reliability;
For use with ACT clutch kits only.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
ARP Flywheel Bolts are a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best bolts we've found and we highly recommend them in any and all applications.
ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.
This item fits the following BMW Engines:
S14 2.3L
Every design is thoroughly researched and tested prior to release to guarantee their products meet and exceed the customer's expectations. Careful attention is payed to factors such as engine torque, maximum RPM, drive type (FWD, RWD, AWD), and the type of driving being done, such as street, sport, track events, racing, etc. ACT's clutch kits are competitively priced, often with specifications greater than competitor's and at a higher quality.
This clutch kit features a Xtreme pressure plate, an G6 racing clutch disc, and an XACT Streetlite Flywheel.
Their Xtreme pressure plate offers a 50-120% clamp load increase, moderate to heavy pedal feel, and is recommended for high performance street and racing applications. All diaphragms went through a four stage heating process for increased strength and unparalleled performance.
The G6 clutch disc is a sprung, 6-pad racing disc that is recommended for high horsepower street and race us and is better at handling high heat than the 4-pad disc. Its material composition is high quality, ceramic friction materials and a heavy duty torsional dampening springs that are rate for this clutch disc's size and expected uses. It has an increased torque capacity, and is better for faster shifting with its low weight and inertia. Being a racing disc, it has good durability and its ceramic composition allows for high heat tolerances. It also has a fast, aggressive engagement in comparison to standard street-use clutch discs.
The XACT Streetlite Flywheel is their most popular flywheel as it is great for both street and drag racing. It allows your engine to rev quicker, giving you increased throttle response, and is considerably lighter than your stock flywheel thanks to its light single-mass design, all while still being very durable!
Clutch Kit Specs:
This product was last offered at the strikethrough price on
08-13-2026
This is an OEM LuK stock twin mass flywheel. When your clutch starts to experience engagement chatter because of hot spots and wear, replacing it with this OEM dual mass flywheel will restore your vehicles driveability and have you clutch shifting smoothly again. OEM replacement for BMW part # 21211223593, 21211223542, and 21201223418.
OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Upgrade your BMW's performance with this stage 3+ clutch kit, boasting a carbon semi-metallic full-faced material for unmatched life, friction coefficient, and drivability. The double-sprung hub enhances flexibility with spring cover relieves, while heat-treated components in both hubs ensure strength and durability. Ideal for various driving scenarios, including street, drag, drift, autocross, road racing, pulling, rallye, and more.
OEM LuK Clutch Kit includes Clutch Disc, Pressure Plate, and T/O Bearing. Call for applications not listed above. SACHS is the OEM supplier for BMW. OEM replacement for BMW part # 21207531556, 21207553768, 21207575556, and 21217523622.
OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.
FX250 (Stage II)
All Clutch Masters clutch kits come complete with:
This clutch kit does not include a flywheel. Requires use of single mass flywheel
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Ridged Disc version.
FX100 (Stage I)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Ridged hub/ disc
Steel-backed organic friction material
This clutch kit does not include a flywheel.
BMW E39 M62 4.4L 9" Twin Disc Clutch Kit - Solid Organic Discs is designed for those seeking exceptional performance in high-torque and high-heat environments. Manufactured by Turner Motorsport, this clutch kit is engineered to meet the demands of high horsepower motorsport applications.
