Engineered in-house, our torque plate is designed to provide a robust and uniform clamping surface between the flywheel and crankshaft across a range of BMW engine applications. Compatible with both factory and Turner performance flywheels, it helps prevent surface galling and ensures consistent torque distribution during installation.

Features:

Prevents galling and wear at the crankshaft-to-flywheel interface under high clamping loads
Promotes even load distribution for improved fastener integrity and long-term reliability
Compatible with a variety of BMW flywheel setups, including OEM and aftermarket configurations
Design:

Precision-machined from cold rolled steel for high strength and dimensional accuracy
Heat treated to 32 HRC for increased surface hardness and wear resistance
Clear zinc anodized for enhanced corrosion protection
Laser-etched Turner logo
Ideal for performance builds and drivetrain refreshes, this torque plate is a critical component for maintaining proper flywheel installation and maximizing long-term durability across multiple BMW platforms.

Lightweight flywheel for quicker, effortless revs that improve throttle response and free up lost horsepower. Tested and approved by our engineering team at Turner Motorsport. Tested in early, late, ETA and IS model E30s for confirmed fitment.

Introducing our Turner Flywheel: an ingenious blend of lightweight design, rich features, and remarkable strength! Crafted from 4140 HT Steel, this flywheel is precision-machined from a solid piece, ensuring unmatched durability. By strategically trimming excess weight from its original design, we've achieved a significant reduction in weight, giving new life to your M20 engine. With upgraded efficiency, your M20 can now swiftly spin to high RPMs, unleashing the full power and prowess of this formidable engine. Our flywheel features a ring gear profile compatible with all starters, alongside a reference tab tailored for early cars equipped with bellhousing-mounted sensor crank position detection.

Do you have an early model transmission with the crank sensors on the bellhousing? Maybe you have a late 325is with the crank sensor on the front of the engine, or maybe you have a 1988 super ETA. No matter which E30 model you have, our flywheel is the perfect choice for you.

During the engineering process we encountered the full spectrum of M20 and flywheel combinations. Early cars with bellhousing crank sensors, late cars with front mounting crank sensors and even a super ETA. On this adventure we found both early and late single mass flywheels and even the dual mass that we thought for sure was just a myth. At first we were hesitant that we could make one flywheel to fit them all but with the persistence of our engineering team(fleet of E30 enthusiasts) we can proudly say our M20 flywheel does in fact fit all engine and transmission applications you can think of.

Features and benefits:

Fits early and late models with M20
Fits shallow and deep bellhousing transmissions
Ring gear suited for both starters (P# 12411726504 + 12411361874)
Heavier than other lightweight flywheels, lighter than OEM, its like the Goldie Locks of flywheels - its just right
Reference pin for bellhousing crank sensor
Strong Single-Piece 4140 HT Steel construction
Designed to be used with factory and OE clutches
Weight Comparisons:

​Factory single mass flywheel EARLY (11221705046) - 23.69 lbs.
Factory single mass flywheel LATE (11221706573) - 18.74 lbs.
Dual mass flywheel (21211225979) - 27.56 lbs.
Turner flywheel - 14 lbs.
What you need:

Short bellhousing transmissions (I/IS) - Throw-out bearing P# 21517521471
Tall bellhousing transmission (ETA) - Throw-out bearing P# 21511204525

Upgrade your MINI's clutch system with this comprehensive Performance Clutch Installation Kit, featuring an aluminum flywheel for enhanced performance. Designed for stage one clutch upgrades, the FX300 (Stage 3) kit offers a high-performance street system with 70% more holding capacity than stock. Enjoy smoother shifts and improved durability with the heavy-duty reinforced pressure plate and Hi-Leverage™ pressure ring design. The kit includes a sprung hub/cushioned disc and a steel-backed fiber friction-lined disc for optimal performance.

• High performance street system
• 70% more holding capacity over stock
• Heavy-Duty reinforced pressure plate
• Hi-Leverage™ pressure ring design
• Sprung hub/cushioned disc
• Steel-backed Fiber Friction lined disc
• Complete kit includes pressure plate, clutch disc, throw-out bearing, pilot bearing or bushing, and alignment tool

This comprehensive performance clutch installation kit is your ticket to an exciting stage one clutch upgrade. It's equipped with an aluminum flywheel, providing all the essential components for enhancing your car's performance.

The FX300 (Stage 3) clutch system is designed for high-performance street driving. With a holding capacity that's 70% greater than stock clutches, thanks to the heavy-duty reinforced pressure plate, it's perfect for enthusiasts seeking a performance boost. Clutch Masters' unique Hi-Leverage™ pressure ring design ensures top-tier performance and durability.

The sprung hub/cushioned disc and steel-backed Segmented Kevlar disc contribute to its robustness, making it suitable for demanding driving conditions.

With every Clutch Masters clutch kit, you receive vital components, including the pressure plate, clutch disc, throw-out bearing (when applicable), pilot bearing or bushing (when applicable), and an alignment tool.

Upgrade your vehicle's clutch system and experience a new level of performance with the FX300 Stage 3 Clutch Installation Kit.

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

• Extra long life street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing
• Pilot Bearing or Bushing
• Alignment Tool
• Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel 

Fitment in following BMWs:This item fits the following BMWs: 
2003-2005 E46 BMW 330i 330ci  only for 6-speed manual transmission  *Door Buster Special - New Product*

Elevate your BMW's performance with the Performance Clutch Installation Kit, comprising a clutch pressure plate and friction disc stage one clutch upgrade. Designed specifically for use with FW-635-AL or FW-635-SF, this FX100 (Stage I) kit is engineered to deliver a high-performance street system, boasting a remarkable 70% increase in holding capacity compared to the stock setup. The kit features a heavy-duty reinforced pressure plate ensuring enhanced performance, coupled with the innovative Hi-Leverage™ pressure ring design for superior functionality. The inclusion of a sprung hub/cushioned disc and steel-backed organic friction material guarantees durability and exceptional performance.

Benefits:

• 70% increased holding capacity over stock
• Heavy-duty reinforced pressure plate for enhanced performance
• Hi-Leverage™ pressure ring design for superior functionality
• Durable steel-backed organic friction material

MINI R50 R52 Stage 1 MINI Cooper Clutch Kit - FX100 03056-HD00 provides an ideal upgrade for those seeking enhanced performance and durability. This Stage 1 clutch kit includes everything necessary for a significant improvement over the stock clutch. The FX100 features a dampened disc version designed for high performance on the street.

• Increased Holding Capacity: Offers 70% more holding capacity over the stock clutch, ensuring better performance under high-torque conditions.
• Heavy-Duty Reinforced Pressure Plate: Built with a heavy-duty pressure plate for improved durability and strength.
• Hi-Leverage™ Pressure Ring Design: Provides enhanced clamping force for a more responsive clutch engagement.
• Sprung Hub/Cushioned Disc: Equipped with a sprung hub and cushioned disc to reduce vibrations and noise.
• Steel-Backed Organic Friction Material: Features steel-backed organic friction material for optimal grip and longevity.

Please note that this kit does not include a flywheel.

MINI R55 to R61 Release Bearing is an essential component for maintaining the smooth operation of your vehicle's clutch system. This high-quality release bearing ensures reliable performance and longevity, making it a crucial part for any MINI owner looking to maintain or repair their clutch system.

• Enhanced Durability: Designed to withstand the pressures of clutch engagement and disengagement, ensuring a longer lifespan.
• Smooth Operation: Provides a smooth and consistent release of the clutch, improving overall driving comfort.
• Precision Engineering: Manufactured to meet or exceed OEM specifications, guaranteeing a perfect fit and reliable performance.
• Easy Installation: Engineered for straightforward installation, reducing downtime and making the replacement process simpler.

This release bearing is ideal for replacing worn or faulty bearings to restore optimal clutch performance in MINI R55 to R61 models.

Elevate your BMW MINI Cooper S/JCW 2.0L's performance with this lightweight clutch master flywheel, weighing just 25 lbs. Crafted to reduce rotational mass, this flywheel upgrade significantly enhances engine response and acceleration, providing an amplified driving experience.

• Lightweight design for reduced rotational mass
• Improves engine response and acceleration
• Enhances overall driving performance

MINI R56 Stage 4 MINI Clutch Kit - FX400 03635-HDCL-SK is a high-performance upgrade designed to enhance the clutch system in the MINI R56. This Stage 4 clutch kit by Clutch Masters offers a significant increase in holding capacity, providing 70% more clamping force than the stock clutch. It features a heavy-duty reinforced pressure plate and a Hi-Leverage™ pressure ring design for improved performance and durability. The sprung disc and steel-backed ceramic lining deliver exceptional engagement and longevity, making it an ideal choice for high-performance street driving.

• 70% increased holding capacity over stock for superior performance
• Heavy-duty reinforced pressure plate for enhanced durability
• Hi-Leverage™ pressure ring design for improved clamping force
• Sprung disc and steel-backed ceramic lining for reliable engagement
• Ideal for high-performance street driving