Packaged by Turner BMW Engine Parts

Valve Cover Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15777295

Part#: 11127512839-KT

In Stock

Sale - Save 20% $ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.87 USD

Add to Wish List

Qty

Sale - Save 20%

$ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.87 USD

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the cover and the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

Ultimate Valve Cover Gasket Kit - With Hardware

10X Entries Into Our F80 M3 Sweepstakes

T#:57761567

Part#: 11120034108KT7

In Stock

$ 232.99 USD

Add to Wish List

Qty

$ 232.99 USD

Add to Wish List

This all-inclusive Valve Cover Service Kit eliminates the guesswork by combining complete factory-spec sealing with show-quality Turner Motorsport hardware.

Genuine BMW Oil Pan Replacement Kit with Gasket and Hardware - N55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:56038088

Part#: 11137600482KT5

In Stock

$ 281.52 USD

Add to Wish List

Qty

$ 281.52 USD

Add to Wish List

This overhaul kit tackles the oil pan leak head-on while giving you a complete, high-performance oil service in one shot. It features a heavy-duty oil pan gasket paired with the mandatory single-use aluminum stretch bolts that must be replaced during installation.

Show More Show Less

Cold Climate Oil Separator Kit - Level 2

10X Entries Into Our F80 M3 Sweepstakes

T#:15744065

Part#: 114317400450-KT

In Stock

Sale - Save 41% $ 231.99

This product was last offered at the strikethrough price on
06-15-2026

$ 137.46 USD

Add to Wish List

Qty

Sale - Save 41%

$ 231.99

This product was last offered at the strikethrough price on
06-15-2026

$ 137.46 USD

Add to Wish List

If you are ready to perform a truly complete oil separator system service, our Level 2 kit provides you with all of our Level 1 kit components plus a throttle body gasket, throttle body inlet boot, ICV grommet, and dipstick tube o-ring. Our Level 2 Cold Climate kit includes the following: Oil separator - BMW cold climate recommended Hose from oil separator to dipstick tube - BMW cold climate recommended Hose from oil separator to valve cover Hose from intake manifold back to the connector hose Hose from oil separator up to the intake manifold Throttle body gasket Throttle body inlet boot ICV rubber grommet Oil dipstick tube o-ring seal It is highly recommended to replace the oil dipstick tube with the updated design by BMW as this also a common place for sludge to build up.

Show More Show Less

Front Oxygen Sensor Set - E9x, E82, E88, Z4

10X Entries Into Our F80 M3 Sweepstakes

T#:55317713

Part#: BFR1/2O2SKT2

In Stock

$ 400.99

This product was last offered at the strikethrough price on
07-14-2026

$ 335.99 USD

Add to Wish List

Qty

$ 335.99 USD

Add to Wish List

Over time, that degradation robs your BMW of its crisp throttle response, tanks your fuel economy, and leaves you staring at a failed emissions ticket

Ignition Service Kit - BMW G-Chassis B46 B48 2.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:30861158

Part#: 12138643360TKT

In Stock

Sale - Save 5% $ 272.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.47 USD

Add to Wish List

Qty

Sale - Save 5%

$ 272.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.47 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and its ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug. To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance! See kit contents below for a complete list of included components.

Show More Show Less

Performance Ignition Service Kit - F1X S63

10X Entries Into Our F80 M3 Sweepstakes

T#:21966000

Part#: F1XS63MIGNTKT

In Stock

Sale - Save 5% $ 483.99

This product was last offered at the strikethrough price on
05-03-2026

$ 459.96 USD

Add to Wish List

Qty

Sale - Save 5%

$ 483.99

This product was last offered at the strikethrough price on
05-03-2026

$ 459.96 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

E36 323iC/323is Stage 1 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:2531

Part#: TMS2531

In Stock

Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

Qty

Sale - Save 3%

$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

1998-99 E36 323ic/is Stage 1 Performance Package
Peak Power Gain: +20hp / +20ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe Cold Air Intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cottonair filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1998-99 E36 323ic/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1998-1999 E36 323i cabrio, 323is coupe

Show More Show Less

High-Performance Ignition Service Kit - BMW E39 E38 E53 M62

10X Entries Into Our F80 M3 Sweepstakes

T#:25739340

Part#: 7599219TMSKT

In Stock

Sale - Save 11% $ 375.99

This product was last offered at the strikethrough price on
05-03-2026

$ 333.22 USD

Add to Wish List

Qty

Sale - Save 11%

$ 375.99

This product was last offered at the strikethrough price on
05-03-2026

$ 333.22 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs and coils to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, we have put together our High-Performance Ignition Service Kits, now featuring our very own Turner Performance Ignition Coils! These kits include our new Turner Performance Ignition Coils, new OEM Bosch Platinum+4 spark plugs, and AGS dielectric grease. The new Turner Performance Ignition Coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark.) Ignition coils are responsible for 1/3 of the operation of your engine and it would be smart to weigh the options when shopping. Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. These coils offered by Turner feature a blue housing that gives your engine the performance and aesthetic you're looking for. Features and Benefits: Increased Performance Direct Fitment Signature Turner Blue finish High Quality Replacement Spark Plugs Premium AGS Dielectric Grease Included

Show More Show Less

Oil Separator Kit - Level 1

10X Entries Into Our F80 M3 Sweepstakes

T#:15710823

Part#: E46M5411_61KT

In Stock

Sale - Save 24% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 93.71 USD

Add to Wish List

Qty

Sale - Save 24%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 93.71 USD

Add to Wish List

Replace all the components of the oil separator system together to prevent damage to all the aspects of your engine. As long as you have everything off, you can rest assured that new parts will last and be reliable. BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. ur Level 1 kit includes the following; Oil separator Hose from oil separator to dipstick tube Hose from oil separator to valve cover Hose from intake manifold back to the connector hose Hose from oil separator up to the intake manifold

Show More Show Less

E36 325i/is 95 Stage 3 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:338677

Part#: TMS2906

Ships in 1 Business Day

Starting at $ 387.00 USD

Add to Wish List

Starting at $ 387.00 USD

Add to Wish List

1995 E36 325i/is Stage 3 Performance Package
Peak Power Gain: +40hp / +32ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3 kit features a cold-air intake kit, cat-back exhaust, performance software, and is tuned for stock M3 cams (not included in Package, can be added below). This whole package has been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

The difference between Stage 2 and Stage 3 is that the software we supply is also tuned for the M3 camshaft upgrade. Adding the stock cams from the S50 and S52 M3 engine is a big wake-up call on the 325i motor. You can expect big power gains in the top end. The M3 cams are a perfect blend of power and driveability - you lose almost nothing in low-end torque.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1995 E36 325i/is Stage 3 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip (tuned for intake, exhaust, M3 cams)

E36 M3 Camshafts
We sell this Package without cams. Used M3 cams can be found from various sources (eBay, forums, etc). We can supply you with new, factory M3 cams or the Schrick equivalent (same specs as factory M3). Select one of these options below.

Applications:
1995 E36 325i, 325is, 325ic

Show More Show Less

E36 328i/is 96-99 Stage 1 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:2845

Part#: TMS2845

In Stock

Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

Qty

Sale - Save 3%

$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

1996-99 E36 328i/ic/is Stage 1 Performance Package
Peak Power Gain: +17hp / +12ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe coil air intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1996-99 E36 328i/ic/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1996-1999 E36 328i sedan, 328i cabrio, 328is coupe

Show More Show Less

Ultimate Performance Ignition Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677481

Part#: E9XUPIGSVKT3-KT

Ships on Oct 26, 2026

Sale - Save 10% $ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.53 USD

Add to Wish List

Qty

Sale - Save 10%

$ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.53 USD

Add to Wish List

Failing ignition coils or plugs can cause sputtering, rough idle, hesitation on acceleration, misfires, and a check engine light. If one of your ignition coils is bad, it is a good idea to replace the plugs to prevent future problems. Great for fixing those rusted / corroded connection. Great for modified or Tuned cars This kit contains: 6 Brisk 1 stage colder spark plugs 6 Bav Auto ignition coils One packet of dielectric grease (AGS )

Show More Show Less

Performance Ignition Service Kit - BMW N73 6.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:47713544

Part#: TMSN73PISKT

In Stock

Sale - Save 20% $ 476.99

This product was last offered at the strikethrough price on
05-03-2026

$ 383.31 USD

Add to Wish List

Qty

Sale - Save 20%

$ 476.99

This product was last offered at the strikethrough price on
05-03-2026

$ 383.31 USD

Add to Wish List

The Bav Auto Ignition coils included in this performance ignition service kit feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This can give your BMW increased torque in the lower RPM range and more horsepower in the upper RPM range. Exact improvements depend on the current condition of your BMW engine, but you'll likely feel a noticeable difference. Keep your engine running smoothly and performing at its best with this performance ignition service kit. Included in this Performance Ignition Service Kit are 12 Bav Auto ignition coils with plug boots, 12 NGK spark plugs, and 2 packets of American Grease Stick dielectric grease. Bavarian Autosport products include a 2-year warranty.

Show More Show Less

OEM Ignition Service Kit - E60 M54 2.5L 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:556711

Part#: E60M54TISKT

In Stock

$ 270.40 USD

Add to Wish List

Qty

$ 270.40 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

E60 530i/xi 06-07 Stage 1 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:391355

Part#: E60530-N52-ST1

Back Ordered

Sale - Save 25% $ 1,379.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 1,034.99 USD

Add to Wish List

Sale - Save 25%

$ 1,379.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 1,034.99 USD

Add to Wish List

2006-2007 E60 530i Stage 1 Performance Package
Peak Power Gain: +29hp / +29ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our flash software is tuned especially for a cold-air intake, maximizing the potential and providing smoother power delivery. We take the stock software and make adjustments for 91 octane (stock software is set around 87). We can get more power and torque, and increase fuel efficiency without affecting driveability or the life of the engine. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

Our software fully maximizes the 'low-output' N52B30O0 engine in the 530i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop.

E60 530i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Turner Motorsport Performance Software Flash

This item fits the following BMWs:
2006-2007 E60 BMW 530i 530xi

Show More Show Less

Air Adjustment Unit/DISA Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677538

Part#: 11617533344-KT

In Stock

Sale - Save 25% $ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

Qty

Sale - Save 25%

$ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware

Show More Show Less

BE Bearings Performance Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677488

Part#: 11247834522-KT

Ships in 2 Business Days

$ 1,350.99 USD

Add to Wish List

Qty

$ 1,350.99 USD

Add to Wish List

The S85 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. BE Bearings, in conjunction with Clevite, an OE bearing manufacturer, have redesigned and manufactured the bearings for greater clearance and have changed the original material composition from tin-aluminum to lead-copper. This upgrade incorporated the state-of-the-art Clevite Tri-Metal design and featured a Tri-Armor™ coating. This allows for the additional lubrication for wear prevention, plus, the softer bearings are better for your engine and are more tolerant of foreign particles suspended in your oil. Another benefit from this is that the oil can now be sent for testing to accurately gauge the amount of wear occurring in the engine. Kit includes Upper and lower BE Bearings upgraded rod bearings Hardware Oil filter Castrol TWS Edge Professional Oil pan gasket RedLine assembly lube

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW 330e 530e ...

10X Entries Into Our F80 M3 Sweepstakes

T#:22196328

Part#: 3PK968TKT

In Stock

Sale - Save 23% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 93.74 USD

Add to Wish List

Qty

Sale - Save 23%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 93.74 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt and tensioner assembly. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

E36 M3 96-99 Stage 1 Turner Motorsport Performance Package

10X Entries Into Our F80 M3 Sweepstakes

T#:4158

Part#: TMS-I3MS41

In Stock

Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

Qty

Sale - Save 3%

$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

1996-99 E36 M3 Stage 1 Performance Package
Peak Power Gain: +10whp / +10wft-lbs
Rev limit: 7000
Octane: 91 or higher

Stage 1 Performance Package includes:
aFe Cold Air Intake (high-flow filter, heat-blocking coated filter shield, molded intake tube)
Conforti Shark Injector performance software

Our base Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe air filter benefits from a heat blocking shield - drawing cool air from the factory intake ducts to feed the engine. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and tuned to work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice. This Package can be upgraded to Stage 2 by adding the larger HFM, "24lb" fuel injectors, a larger air intake kit, and Stage 2 software.

Related Upgrades -
Underdrive Power Pulley Kit - Underdriving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10hp at the wheels.
Exhaust - Borla or Corsa cat-back muffler for more performance, lighter weight, and a more-aggressive sound. Expect a gain of 5whp with either of these exhausts.

This item fits the following BMWs:
1996-1999 E36 M3 (manual transmission)
1996-1999 E36 M3 (automatic transmission)

Show More Show Less

WPC-Treated Performance Rod Bearing Installation Kit - B46 / B48 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:36066270

Part#: B48-WPC-RBKT2

In Stock

Sale - Save 25% $ 551.99

This product was last offered at the strikethrough price on
05-03-2026

$ 413.62 USD

Add to Wish List

Qty

Sale - Save 25%

$ 551.99

This product was last offered at the strikethrough price on
05-03-2026

$ 413.62 USD

Add to Wish List

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes:

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (8) Genuine BMW Connecting Rod Bolts (8) Assembly Lube (4 oz.)

Show More Show Less

Genuine BMW Oil Change Kit / Inspection I

10X Entries Into Our F80 M3 Sweepstakes

T#:15677558

Part#: 009012ECS01-KT

In Stock

$ 171.18 USD

Add to Wish List

Qty

$ 171.18 USD

Add to Wish List

To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: Seven Quarts of BMW Synthetic Engine Oil Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit) ECS magnetic drain plug

Show More Show Less

Turbo Oil Feed Line Kit - E70 M57 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:51883690

Part#: 11427808153KT

Ships in 1-2 days

$ 417.99

This product was last offered at the strikethrough price on
09-22-2026

$ 411.99 USD

Add to Wish List

Qty

$ 411.99 USD

Add to Wish List

The oil feed lines for the M57's turbochargers are known to leak as they age, especially the J Line at the top of the engine due to its tight bend. This kit includes all three replacement oil feed lines, plus the banjo bolts and sealing washers needed to install them.

Show More Show Less

Ignition Service Kit - BMW I12 I15 i8 B38 1.5L

10X Entries Into Our F80 M3 Sweepstakes

T#:30927367

Part#: TMSI8B38IGNKT

In Stock

Sale - Save 5% $ 205.99

This product was last offered at the strikethrough price on
05-03-2026

$ 195.69 USD

Add to Wish List

Qty

Sale - Save 5%

$ 205.99

This product was last offered at the strikethrough price on
05-03-2026

$ 195.69 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug. To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance! Included: NGK Spark Plugs OEM Eldor Ignition Coils AGS Spark Plug Boot Dielectric Grease

Show More Show Less

E36 328i/is 96-99 Stage 3+ Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:2896

Part#: TMS2896

In Stock

Sale - Save 3% $ 1,154.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,120.30 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,154.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,120.30 USD

Add to Wish List

1996-99 E36 328i/ic/is Stage 3+ Performance Package
Peak Power Gain: +34hp / +12ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3+ kit is setup around the best upgrades to make power on the M52 engine: cold-air intake kit, M50 manifold, M3-spec cams, and performance software.

We sell this kit a number of different ways. The base Stage 3+ Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
M50 manifold adapter kit (M50 manifold not included)
TMS Shark Injector performance software

Optional Items:
New stock E36 M3 camshafts (or Schrick equivalent)
M50 manifold
Modified fuel rail cover (clears the fuel injectors with M50 manifold)

Adding the M50 manifold produces huge power gains in the upper RPM. If you spend the majority of your time over 5000 RPM, you're going to love this kit. The parts in Stage 3+ are our most-popular performance upgrades for the E36 328i: intake, cams, software, complemented by the M50 manifold. Stage 3+ shifts the focus entirely to the top end of the RPM. With the change in the manifold there is not much of a mid-range torque increase. The Conforti software keeps any torque loss to a minimum.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, carbon fiber intake tube, sealing materials, hardware, and install instructions.

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1996-99 E36 328i/ic/is Stage 3+ Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
M50 manifold adapter kit (M50 manifold not included)
Shark Injector Stage 3+ performance software

This Package requires additional parts, sourced or sold separately:
Stock E36 M3 camshafts (or Schrick equivalent)
Modified fuel rail cover (clears the fuel injectors with M50 manifold)
M50 manifold
TMS can supply all of these parts for you or you can source your own. Contact us before or after your order about the availability and cost of these parts.

Applications:
1996-1999 E36 328i sedan, 328i cabrio, 328is coupe

Show More Show Less

Oil & Level Sensor Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:57543752

Part#: 12617607909KT4

In Stock

$ 330.99

This product was last offered at the strikethrough price on
09-01-2026

$ 240.99 USD

Add to Wish List

Qty

$ 240.99 USD

Add to Wish List

Maintain peak engine lubrication and precise oil level telemetry with this complete Oil & Level Sensor Service Kit. Engineered for enthusiasts who demand reliable performance on the street or track, this kit features Liqui Moly synthetic motor oil paired with an OEM spec oil filter to maintain stable oil pressure and minimize internal friction. To resolve erratic oil level warnings and lower pan seepage, the bundle includes a responsive Bremmen oil level sensor, new securing nuts, and a fresh drain plug. Perform a clean, comprehensive fluid service while permanently fixing oil monitoring faults in one pass.

Show More Show Less

Oil Pan Gasket & Level Sensor Refresh Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:57543746

Part#: 12617607909KT3

In Stock

$ 308.99

This product was last offered at the strikethrough price on
10-02-2026

$ 226.99 USD

Add to Wish List

Qty

$ 226.99 USD

Add to Wish List

Protect your engine's lubrication system and maintain critical track day telemetry with a complete Oil Pan Gasket & Level Sensor Refresh Kit. Aged oil pan gaskets and oil level sensors are notorious failure points that lead to messy leaks, loss of fluid, and inaccurate oil level readings under hard driving conditions. This complete service package supplies a precision molded pan gasket, an OEM spec oil level sensor, brand new single use pan bolts, and fresh sensor fasteners. Designed to restore factory sealing integrity and precise instrument cluster readings, this kit provides everything needed for a clean, permanent repair.

Show More Show Less

Liqui Moly MolyGen Oil Change Kit / Inspection I

10X Entries Into Our F80 M3 Sweepstakes

T#:57507409

Part#: 11428583898KT2

In Stock

Sale - Save 9% $ 123.99

This product was last offered at the strikethrough price on
08-31-2026

$ 112.92 USD

Add to Wish List

Qty

Sale - Save 9%

$ 123.99

This product was last offered at the strikethrough price on
08-31-2026

$ 112.92 USD

Add to Wish List

Crankcase Ventilation Refresh Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:57543744

Part#: 11158647962KT2

In Stock

$ 265.99

This product was last offered at the strikethrough price on
09-29-2026

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Maintain optimal engine vacuum and prevent oil blow-by failures under hard driving with this complete Crankcase Ventilation Refresh Kit. Aged oil separator valves and heat stressed plastic hoses fail unexpectedly, leading to oil ingestion, loss of power, and damaged rear main or valve cover gaskets from excessive crankcase pressure buildup. Designed as a direct fit refresh, this kit ensures crisp throttle response, proper engine breathing, and total peace of mind on the street or track.

Show More Show Less

Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52

10X Entries Into Our F80 M3 Sweepstakes

T#:56110313

Part#: 11787558055KT

In Stock

$ 307.99

This product was last offered at the strikethrough price on
08-13-2026

$ 304.99 USD

Add to Wish List

Qty

$ 304.99 USD

Add to Wish List

Your engine's air fuel ratio needs to be dead on. Worn out factory pre-cat oxygen sensors delay vital data to the DME, leading to sub optimal fueling, lost horsepower, and dangerous hesitation under load.

Show More Show Less

E36 325i/is 92 Stage 1 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:340151

Part#: TMS2842

Ships in 1 Business Day

Sale - Save 5% $ 636.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 604.20 USD

Add to Wish List

Sale - Save 5%

$ 636.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 604.20 USD

Add to Wish List

1992 E36 325i/is Stage 1 Performance Package
Peak Power Gain: +16hp / +24ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our base Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe air filter benefits from a heat blocking shield - drawing cool air from the factory intake ducts to feed the engine. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades -
Underdrive Power Pulley Kit - Underdriving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10hp at the wheels.
Exhaust - Borla or Corsa cat-back muffler for more performance, lighter weight, and a more-aggressive sound. Expect a gain of 5whp with either of these exhausts.

1992 E36 325i/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
TMS Performance Chip (need to specify your car's DME number in the order)

Applications:
1992 E36 325i, 325is

Show More Show Less

Crankcase Oil Separator and Vent Hose Kit - E90 325xi/330xi, E60 525x...

10X Entries Into Our F80 M3 Sweepstakes

T#:221962

Part#: TMS221962

Ships in 2 Business Days

$ 458.99 USD

Add to Wish List

Qty

$ 458.99 USD

Add to Wish List

The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create an oil sludge condition that is impossible to clear. The plastic hoses can become brittle and crack which leads to vacuum leaks and oil leaks. Thankfully, the CCV is replaceable on the early N52 engines (2006 and some 2007 models) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

This is a kit containing the oil separator, the vent hoses, and the intake manifold gaskets that are done during a typical oil separator replacement. Complete kit includes:

11617531423, Genuine BMW oil separator

11617559530, vent hose

11157522931, oil separator hose

11157567801, return hose

11157537701, extraction hose

11617547242, intake manifold gaskets (set of 6)
The intake manifold must be removed to access the oil separator so new profile gaskets are included. We also recommend (but not required) a new oil separator fitting on the intake manifold because it's one of the heated elements that vaporizes the oil as it enters the intake.

The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

This kit fits the following BMWs:
-10/2005 E90 BMW 325xi 330xi - Sedan
-10/2005 E91 BMW 325xi - Wagon
-10/2005 E60 BMW 525xi 530xi

Show More Show Less

Fuel pump and level sensor kit

10X Entries Into Our F80 M3 Sweepstakes

T#:56471664

Part#: 16116768788KT2

Ships in 2 Business Days

Sale - Save 3% $ 681.99

This product was last offered at the strikethrough price on
09-04-2026

$ 664.00 USD

Add to Wish List

Qty

Sale - Save 3%

$ 681.99

This product was last offered at the strikethrough price on
09-04-2026

$ 664.00 USD

Add to Wish List

This targeted refresh package to completely restore your E46’s fuel tank module. Built around a high grade Continental fuel pump assembly this kit ensures maximum fuel flow stability, precise fuel gauge readings, and a leak free installation.

Show More Show Less

M57 Turbo Exhaust Clamp Kit - E70, E90

10X Entries Into Our F80 M3 Sweepstakes

T#:58344035

Part#: 18207793677KT

Ships in 2 Business Days

$ 80.99

This product was last offered at the strikethrough price on
10-08-2026

$ 75.99 USD

Add to Wish List

Qty

$ 75.99 USD

Add to Wish List

Used to secure the Turbo to the DPF (Diesel Particulate Filter)

E46 323i/323ci 99-00 Stage 1 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:2835

Part#: TMS2835

Back Ordered

Sale - Save 3% $ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 889.19 USD

Add to Wish List

Qty

Sale - Save 3%

$ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 889.19 USD

Add to Wish List

1999-2000 E46 323i/Ci Stage 1 Performance Package
Peak Power Gain: +17hp / +8ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E46 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1999-2000 E46 323i/Ci Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1999-2000 E46 323i sedan, 323Ci coupe and convertible

Show More Show Less

King X-Series Bearings S85 Performance Rod Bearing Replacement Kit ...

10X Entries Into Our F80 M3 Sweepstakes

T#:56218619

Part#: CR1057GPCXKT2

Ships in 2 Business Days

$ 1,432.99 USD

Add to Wish List

Qty

$ 1,432.99 USD

Add to Wish List

At the heart of this kit are King's S85 Coated & Graded GPC rod bearings which are engineered to handle high thermal loads, provide superior oil film retention, and offer enhanced protection during cold starts and high-RPM runs

Show More Show Less

Ignition Service Kit - i8, Supra, Z4

10X Entries Into Our F80 M3 Sweepstakes

T#:41289800

Part#: 12122455258TKT

In Stock

Sale - Save 5% $ 582.99

This product was last offered at the strikethrough price on
06-24-2026

$ 551.32 USD

Add to Wish List

Qty

Sale - Save 5%

$ 582.99

This product was last offered at the strikethrough price on
06-24-2026

$ 551.32 USD

Add to Wish List

Includes 6 NGK High Power spark plugs, and 6 Bosch ignition coils, for an all in one maintenance kit!

DRY Level 3 Timing Chain Kit (no fluids) - M62TU

10X Entries Into Our F80 M3 Sweepstakes

T#:53149921

Part#: 11311435026NFKT

Ships in 3 Business Days

$ 1,070.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,070.89 USD

Add to Wish List

Qty

$ 1,070.89 USD

Add to Wish List

E46 328i/328ci 99-00 Stage 1 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:2848

Part#: TMS2848

Back Ordered

Sale - Save 3% $ 751.99

This product was last offered at the strikethrough price on
05-03-2026

$ 729.43 USD

Add to Wish List

Qty

Sale - Save 3%

$ 751.99

This product was last offered at the strikethrough price on
05-03-2026

$ 729.43 USD

Add to Wish List

1999-2000 E46 328i/Ci Stage 1 Performance Package
Peak Power Gain: +14hp / +11ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E46 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1999-2000 E46 328/Ci Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (oiled cotton air filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1999-2000 E46 328 sedan, 328Ci coupe and convertible

Show More Show Less

A/C Belt Replacement Kit With Service Tools - F Chassis

10X Entries Into Our F80 M3 Sweepstakes

T#:41661238

Part#: 11287631825TKT

In Stock

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Maintain peak performance of your BMW’s climate control system with the A/C Belt Replacement Kit With Service Tools - F Chassis, trusted by enthusiasts and technicians for its fit, quality, and ease of use.

Show More Show Less

E90 330i/xi 06 Stage 1 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:391352

Part#: E90330-ST1

Back Ordered

Sale - Save 25% $ 1,379.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 1,034.99 USD

Add to Wish List

Sale - Save 25%

$ 1,379.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 1,034.99 USD

Add to Wish List

2006 E90 330i Stage 1 Performance Package
Peak Power Gain: +29hp / +29ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our flash software is tuned especially for a cold-air intake, maximizing the potential and providing smoother power delivery. We take the stock software and make adjustments for 91 octane (stock software is set around 87). We can get more power and torque, and increase fuel efficiency without affecting driveability or the life of the engine. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

Our software fully maximizes the 'high-output' N52B30O0 engine in the 330i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop.

E90 330i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Turner Motorsport Performance Software Flash

This item fits the following BMWs:
2006 E90 BMW 330i

Show More Show Less

OEM Ignition Service Kit - BMW F90 M5 S63T4

10X Entries Into Our F80 M3 Sweepstakes

T#:30031512

Part#: F90M5IGNSKT

Ships in 2 Business Days

$ 640.99

This product was last offered at the strikethrough price on
05-07-2026

$ 629.99 USD

Add to Wish List

Qty

$ 629.99 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug. To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

Show More Show Less

OEM Ignition Service Kit - E38 M60

10X Entries Into Our F80 M3 Sweepstakes

T#:556708

Part#: E38M60TISKT

Ships in 2 Business Days

$ 613.99

This product was last offered at the strikethrough price on
08-07-2026

$ 598.99 USD

Add to Wish List

Qty

$ 598.99 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

King Bearings S85 Performance Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:56218616

Part#: CR1057GPCKT2

Ships in 2 Business Days

$ 1,432.99 USD

Add to Wish List

Qty

$ 1,432.99 USD

Add to Wish List

At the heart of this kit are King's S85 Coated & Graded GPC rod bearings which are engineered to handle high thermal loads, provide superior oil film retention, and offer enhanced protection during cold starts and high RPM runs.

Show More Show Less

E90 325i/xi 06 Stage 1 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:391353

Part#: E90325-ST1

Back Ordered

Sale - Save 9% $ 1,130.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,030.48 USD

Add to Wish List

Sale - Save 9%

$ 1,130.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,030.48 USD

Add to Wish List

2006 E90 325i Stage 1 Performance Package
Peak Power Gain: +29hp / +29ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our flash software is tuned especially for a cold-air intake, maximizing the potential and providing smoother power delivery. We take the stock software and make adjustments for 91 octane (stock software is set around 87). We can get more power and torque, and increase fuel efficiency without affecting driveability or the life of the engine. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

Our software fully maximizes the 'low-output' N52B30 engine in the 325i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop.

E90 325i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Turner Motorsport Performance Software Flash

This item fits the following BMWs:
2006 E90 BMW 325i

Show More Show Less

E82 135i N54 Stage 1+ Turner Power Package

10X Entries Into Our F80 M3 Sweepstakes

T#:224338

Part#: TMS224338

Ships in 3 Business Days

$ 1,194.00 USD

Add to Wish List

Qty

$ 1,194.00 USD

Add to Wish List

2008-2010 E82 135i N54 Stage 1+ Performance Package
Peak Power Gain*: up to 103hp / 108ft-lbs
+ aFe Pro5R Dual Cone Intake
+ Cobb AccessPort programmer

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 1+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1+ package lines up with the Cobb Stage 1 tuning maps for an intake and FMIC (91 or 93+ octane fuel). Simply download the Stage 1+ map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. The addition of the larger intercooler makes Stage 1 more enjoyable and won't let you down at the track or dragstrip. * Note that peak power gains are quoted remain the same as Stage 1 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak.

This item fits the following BMWs:
2008-2010 E82 BMW 135i (N54 engine)

Show More Show Less

WPC Performance Rod Bearing Replacement Kit - Dry

10X Entries Into Our F80 M3 Sweepstakes

T#:57267800

Part#: 11247838088DKT

Ships on Nov 2, 2026

$ 994.06 USD

Add to Wish List

Qty

$ 994.06 USD

Add to Wish List

OEM Accessory Belt Service Kit - E32 E34 E38 M60

10X Entries Into Our F80 M3 Sweepstakes

T#:589745

Part#: PBTABE3XM60KT

Back Ordered

Sale - Save 11% $ 702.99

This product was last offered at the strikethrough price on
05-03-2026

$ 625.40 USD

Add to Wish List

Qty

Sale - Save 11%

$ 702.99

This product was last offered at the strikethrough price on
05-03-2026

$ 625.40 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

E36 325i/is 93-94 Stage 2 Turner Motorsport Performance Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:340152

Part#: TMS2891

Back Ordered

Sale - Save 3% $ 2,149.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 2,085.49 USD

Add to Wish List

Sale - Save 3%

$ 2,149.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 2,085.49 USD

Add to Wish List

1993-94 E36 325i/is Stage 2 Performance Package
Peak Power Gain: +30hp / +28ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 2 kit featuring a cold-air intake kit, cat-back exhaust, and performance software. All three of these pieces have been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1993-94 E36 325i/is Stage 2 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip

Applications:
1993-94 E36 325i, 325is, 325ic

Show More Show Less

Ignition Service Kit - BMW G05 X5, G07 X7 N63

10X Entries Into Our F80 M3 Sweepstakes

T#:30894264

Part#: M50IN63IGNTKT

Ships in 2 Business Days

$ 647.99

This product was last offered at the strikethrough price on
05-06-2026

$ 628.99 USD

Add to Wish List

Qty

$ 628.99 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug. To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

Show More Show Less

Project Cars

SELECT YOUR BMW

Packaged by Turner BMW Engine Parts

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results