Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

N54 & E8x/E9x N55 Mosselman Billet Oil Thermostat
For Gasket/Install kit see T#4799665
Mosselman Turbosystems - Corporate Logo
T#:4621131
Part#: OTN54.T85
In Stock
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
The N54 engine is no stranger to oil cooling problems, that’s why we recommend installing the MSL Oil Thermostat. The standard oil thermostat will reach around 120 degrees Celsius with a normal driving style. The MSL Oil Thermostat will open at a lower temperature than the standard oil thermostat (at 85 degrees Celsius) and will keep the temperature stable between 95 and 105 degrees Celsius. Installing the MSL thermostat ensures a cooler oil temperature which will result in more stable performance, but above all this improves the reliability of the engine. It is recommended to install the thermostat, especially for cars that are tuned.
Show More Show Less
Bimmerworld - Corporate Logo
T#:1120864
Part#: 100.11.530.0003
In Stock
$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping

Upgrade your BMW's oil pressure sensor setup with the Oil Distribution/Sending Block. This versatile block is designed to mount in the stock oil pressure sensor location on the oil filter housing or in the original location on the engine block. It allows the use of up to two aftermarket sending units (not included) along with the factory sensor, providing accurate pressure and temperature measurements. Engineered for reliability and cleanliness, it ensures a reliable setup for your BMW's oil pressure monitoring needs.

  • Mounts in stock oil pressure sensor location for easy installation
  • Allows use of up to two aftermarket sending units in addition to the factory sensor
  • Incorporates factory sending unit for utilizing the factory oil pressure light
  • Threaded for one M12x1.5 port and two 1/8th NPT ports for versatility
  • Includes banjo bolt and crush washers for secure installation
  • Compatible with various BMW engines including M20, M42, M50, M52, M54, N52, N54, S50, S52, S54, S65, M10, S14, and M30
Show More Show Less
Bimmerworld - Corporate Logo
T#:48125814
Part#: 100.16.546.0003
In Stock
$ 204.99 USD
Free Shipping on orders $49 and up
$ 204.99 USD
Free Shipping on orders $49 and up
BimmerWorld's E46 Fuel Starvation Kit Fuel puts an end to the aggravating and potentially dangerous fuel starvation that can occur in sweeping right hand turns. This is BimmerWorld's more Budget-Friendly version kit, which uses a quality aftermarket fuel pump, rather than the pricey VDO brand pump.
Show More Show Less


Radium Engineering - Corporate Logo
T#:577808
Part#: 20-0373
In Stock
$ 259.99 USD
Free Shipping
$ 259.99 USD
Free Shipping
Oil catch cans prevent elevated oil blow by caused by aggressive driving. The Radium Engineering catch can uses a closed loop system and is emissions and track legal, and by not venting to atmosphere avoids any oil smells from getting into the cabin. Kit includes Billet catch can Mounting bracket 10AN hose fittings and adapters 5/8" PCV hose Mounting hardware
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.
Mosselman Turbosystems - Corporate Logo
T#:37183641
Part#: 030210062BLK
Ships in 8 Business Days
$ 459.00 USD
Free Shipping on orders $49 and up
The S55 engine is no stranger to oil cooling problems, that’s why we recommend installing the MSL Oil Thermostat. The standard oil thermostat will reach around 120 degrees Celsius with a normal driving style. The MSL Oil Thermostat will open at a lower temperature than the standard oil thermostat (at 85 degrees Celsius) and will keep the temperature stable between 95 and 105 degrees Celsius. Installing the MSL thermostat ensures a cooler oil temperature which will result in more stable performance, but above all this improves the reliability of the engine. It is recommended to install the thermostat, especially for cars that are tuned.
Show More Show Less

Bimmerworld - Corporate Logo
T#:637641
Part#: 100.11.590.0004
Ships in 8 Business Days
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
A frustration too many BMW owners share is the inability to physically check the oil level. BMW began replacing traditional style dipsticks with new level sensors that display your oil level on your iDrive system. In theory, this could be great. An electrical, sensor-based oil level system would allow for continuous monitoring of the oil level and immediate warning in the event of oil loss. The main problem with this updated system is the sensors themselves and the sub-par electronics that control and report this information to the iDrive system. In practice, the oil level sensors have proven to be slow, inaccurate, and even faulty, displaying wildly inaccurate measurements. Needless to say, the team over at Bimmerworld felt this needed to be addressed with something a little more reliable. Returning to the tried and true method, Bimmerworld now offers their very own S65 Oil Dipstick Parts Kit. This kit includes everything you need to install a dipstick in your M3.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.
Radium Engineering - Corporate Logo
T#:31059457
Part#: 20-1440
In Stock at Vendor
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping
Radium Engineering - Corporate Logo
T#:27905095
Part#: 20-0024
In Stock at Vendor
$ 28.99 USD
Free Shipping on orders $49 and up

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose



AUTOTECKNIC - Corporate Logo
T#:46203538
Part#: ATK-BM-0408-V2
Ships in 8 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
Transform your G8X engine bay into a true centerpiece with the AutoTecknic Version II Dry Carbon Fiber Engine Cover. Expertly crafted using pre-preg dry carbon and cured in an autoclave, this cover offers a lightweight yet durable upgrade that elevates both performance and aesthetics. The precision 3K twill weave carbon delivers a flawless, uniform pattern, enhanced by a deep gloss UV-resistant clear coat for long-lasting protection against fading and yellowing. What sets this Version II cover apart is the bold tri-colored ///M-inspired stripes, perfectly integrated into the design. Combined with the iconic ///M emblem, the cover captures BMW’s motorsport heritage while adding a modern, aggressive edge to your engine bay. Every detail is engineered for a seamless OEM fit—simply transfer the factory M emblem for a complete installation. Upgrade your G80 M3 or G82/ G83 M4 with this stunning centerpiece and let your engine bay reflect the same dynamic spirit as the car itself.
Show More Show Less
Canton Racing - Corporate Logo
T#:8246787
Part#: 24-126
Ships on Nov 2, 2026
17% off MSRP $ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD
17% off MSRP
$ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD
AUTOTECKNIC - Corporate Logo
T#:39971046
Part#: BM-0006-BCG
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up
AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.
Show More Show Less

BMW S55 Upgrade Turbocharger Set, MSL65-80
Available for the BMW F8x (M2 Competition, M3 and M4)
Mosselman Turbosystems - Corporate Logo
T#:12872412
Part#: 10210019
In Stock
5% off MSRP $ 4,978.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,753.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
5% off MSRP
$ 4,978.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,753.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Mosselman BMW S55 Upgrade Turbocharger Set, MSL65-80 (~ 650-800hp)

Radium Engineering - Corporate Logo
T#:577815
Part#: 20-0070-02
In Stock at Vendor
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
Aluminum large bore fuel rail for feeding your engine no matter the power level. Fuel rail also allows use of external fuel pressure regulators, pressure gauges, and pulse dampers. Safe for all fuel types including E85.
Show More Show Less
Ferrea - Corporate Logo
T#:28770000
Part#: FER-HPVK-N20-T
Ships in 4 Business Days
$ 619.99 USD
Free Shipping on orders $49 and up

Genuine BMW M Performance - Corporate Logo
T#:400445
Part#: 11122444531
Ships in 4 Business Days
$ 3,514.60 USD
$ 3,514.60 USD

BMW offers their M Performance retrofit kit for your 340i/i xDrive & 440i/i xDrive for increased power and a more aggressive sounding and free flowing exhaust! This system directly from BMW is perfect for those looking for more power and an aggressive exhaust note without voiding the warranty! Upon installation, an immediate improvement is noticed, especially in the low to mid range powerband. The kit increases your vehicle’s power by 35 hp to 355hp and 39 lb-ft of torque to 369 lb-ft (355 lb-ft for manual transmission vehicles).The BMW M Performance Power kit now comes bundled with a higher flowing, valve controlled exhaust for maximum performance and exhilaration! The BMW M Performance Power Kit features engine tuning software and an electronically controlled valve exhaust system that is actuated in Sport/Sport+ modes via the driving experience control button. 

Included with the Power and Sound Kit:

  • M Performance Muffler
  • M Performance Decal Kit
  • Stick on label and Badge
  • Performance BMW software upgrade code
  • Wiring Harness

After ordering this kit, simply take this to your dealer to have the ECU re-flashed and all of the components included installed! 

The muffler included must also be used with the following BMW exhaust tips:

*Dealer pricing for installation varies from dealer to dealer. Please contact your dealer for installation cost before purchasing.
 

Show More Show Less
Genuine BMW M Performance - Corporate Logo
T#:558788
Part#: 11122455570
Ships in 4 Business Days
4% off MSRP $ 2,340.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,242.99 USD
4% off MSRP
$ 2,340.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,242.99 USD
If you want your engine bay to look as good as possible, the full S63 M Performance Carbon Fiber Engine Cover Set from BMW is the way to go! This kit includes 3 panels including: Front Cover Panel with M Sport Tri-Color Stripes M Sport Tri-Color Stripes Driver Side Cover Panel Passenger Side Cover Panel All beauty covers are made from high-quality carbon fiber and have a high gloss finish.
Show More Show Less

Bimmerworld - Corporate Logo
T#:40207517
Part#: 100.16.682.0001
Ships in 6 Business Days
$ 262.99

This product was last offered at the strikethrough price on
10-12-2026

$ 249.99 USD
Free Shipping on orders $49 and up
$ 249.99 USD
Free Shipping on orders $49 and up

Bimmerworld - Corporate Logo
T#:39329309
Part#: 118.11.680.0001
Ships in 6 Business Days
$ 562.99 USD
Free Shipping on orders $49 and up
This kit includes the components needed to delete your factory oil level sensor and add a traditional oil dipstick instead. This is the oil dipstick tube used in the F82 M4 GT4 race car, which is bolted to the underside of the oil pan where the electronic oil level sensor would be installed normally.
Show More Show Less
Genuine BMW M Performance - Corporate Logo
T#:546125
Part#: 11122444214
Ships in 7 Business Days
2% off MSRP $ 2,940.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,879.99 USD
2% off MSRP
$ 2,940.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,879.99 USD

BMW offers their M Performance retrofit kit for your 540i/i xDrive for increased power and a more aggressive sounding and free flowing exhaust! This system directly from BMW is perfect for those looking for more power and an aggressive exhaust note without voiding the warranty! Upon installation, an immediate improvement is noticed, especially in the low to mid range powerband.

Included with the Power and Sound Kit:

  • M Performance Muffler
  • Torque converter kit for the GA8HP50 transmission
  • M Performance Decal Kit
  • Stick on label and Badge
  • Performance BMW software upgrade code

After ordering this kit, simply take this to your dealer to have the ECU re-flashed and all of the components included installed! 

The muffler included must also be used with the following BMW exhaust tips:

  • Chrome: 18302444529
  • Carbon Fiber: 18302444530 (subject to current availability, please contact sales for additional support)

 

*Dealer pricing for installation varies from dealer to dealer. Please contact your dealer for installation cost before purchasing.
**Vehicles without the M Sport Package or Aerodynamics Package will require alterations to the rear bumper and cut out trims (BMW Part # 51122447338 for proper fitment.

Show More Show Less
Mosselman Turbosystems - Corporate Logo
T#:12872415
Part#: 10210020
Ships in 7 Business Days
$ 5,378.00 USD
Free Shipping on orders $49 and up
This Mossleman upgraded turbocharger will bring reliable high performance to your S58 engine! Depending on modifications done to the vehicle, this turbo can deliver up to 950hp!


Mosselman Turbosystems - Corporate Logo
T#:37183640
Part#: 030210063RED
Special Order: No Guaranteed ETA
$ 459.00 USD
Free Shipping on orders $49 and up
The S55 engine is no stranger to oil cooling problems, that’s why we recommend installing the MSL Oil Thermostat. The standard oil thermostat will reach around 120 degrees Celsius with a normal driving style. The MSL Oil Thermostat will open at a lower temperature than the standard oil thermostat (at 85 degrees Celsius) and will keep the temperature stable between 95 and 105 degrees Celsius. Installing the MSL thermostat ensures a cooler oil temperature which will result in more stable performance, but above all this improves the reliability of the engine. It is recommended to install the thermostat, especially for cars that are tuned.
Show More Show Less
Ferrea - Corporate Logo
T#:31
Part#: E11025-24
Back Ordered
$ 7,199.76 USD
Free Shipping
$ 7,199.76 USD
Free Shipping
E36 325, 328 M3 Ferrea Titanium Retainer Set - set of 24. Recommended to be used with the Ferrea Competition Plus Big Valves. MUST be used with the Ferrea high-performance valve spring and seat kit. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel, Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
Show More Show Less
Radium Engineering - Corporate Logo
T#:577879
Part#: 20-0470
Back Ordered
Starting at $ 599.99 USD
Free Shipping
Starting at $ 599.99 USD
Free Shipping
Designed to prevent fuel starvation by acting as a reserve tank to keep fuel flowing in the case of the main tank sump running dry, during hard acceleration or turning for example. The BMW fuel surge tank install kit includes all needed brackets and hoses for a complete installation. This surge tank kit installs in place of the factory filter and fuel pressure regulator located in the fuel tank for a easy installation, the factory fuel pump is still in place and acts in tandem with the surge tank pumps by maintaining fuel level in the surge tank.
Show More Show Less

Ferrea - Corporate Logo
T#:163
Part#: SL1021-24
Back Ordered
$ 118.80 USD
Free Shipping
$ 118.80 USD
Free Shipping
E36 325, 328 M3 Ferrea Spring Seat Set includes 24 seats. MUST be uses with the Ferrea valve springs. Recommended to be used with the Ferrea Competition Plus Big Valves and Ferrea Titanium Retainers. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
Show More Show Less

Ferrea - Corporate Logo
T#:439
Part#: S10049-24
Back Ordered
$ 817.20 USD
Free Shipping
$ 817.20 USD
Free Shipping

Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicone steel These springs are manufactured with state-of-the-art equipment. Ferrea springs are heat-treated and stress-relieved, which dramatically increases the spring's life. Strict quality control procedures and cycle testing ensures consistency from batch to batch. Ferrea valve springs provide the stability needed for high lift, high rpm racing and street car engines. Kit includes a set of 24 springs. MUST be used with the Ferrea Spring Seat and Titanium Retainers. See links below. 

https://www.turnermotorsport.com/e/p-163-e36-325-328-m3-ferrea-spring-seat-set/ 

https://www.turnermotorsport.com/e/p-31-e36-325-328-m3-ferrea-titanium-retainer-set/



This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

Show More Show Less
Mosselman Turbosystems - Corporate Logo
T#:44359934
Part#: 010210013
In Stock
$ 2,518.00 USD
Free Shipping on orders $49 and up
$ 2,518.00 USD
Free Shipping on orders $49 and up
The Mosselman Upgrade Turbocharger (MSL38-50) for the N20 PWG engine increases performance levels with proven reliability. Depending on the modifications done to the car and fuel type, this turbo set can deliver up to 500hp!
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:21045518
Part#: ATK-BM-0006-BC
Ships in 8 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Do you ever go to fill up your car and look at your gas cap and feel like something is missing? Well here you are, the AUTOTACKNIC dry carbon fuel filler cap is here is here to give your old filler cap some high quality personality! Crack a smile every time you open your gas cap!
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39295568
Part#: BM-0385
Ships in 8 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
Designed for BMW F95 X5M and F96 X6M owners seeking an elevated under-hood appearance, the AutoTecknic Dry Carbon Engine Cover delivers premium styling and race-inspired refinement.

AUTOTECKNIC - Corporate Logo
T#:39329329
Part#: BM-0420-G
Ships in 8 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
Elevate your BMW's style and performance with the AutoTecknic Dry Carbon Fiber ECU Battery Terminal Cover – the ultimate choice for discerning enthusiasts.

AUTOTECKNIC - Corporate Logo
T#:396229
Part#: BM-0401
Ships in 8 Business Days
$ 549.99 USD
Free Shipping on orders $49 and up
Don't let your engine bay bore you. A carbon fiber engine cover makes your bay adds a sporty look instantly. We use vacuum technology to ensure every engine cover fits just like OEM. Uses rubber mounts from factory engine cover.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:21275553
Part#: ATK-TO-0407
Ships in 8 Business Days
$ 550.00 USD
Free Shipping on orders $49 and up
Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Stand out from the rest when you open your hood with this full carbon fiber engine cover for the A90 Supra! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39329331
Part#: BM-0420-S
Ships in 8 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
Elevate your BMW's style and performance with the AutoTecknic Dry Carbon Fiber ECU Battery Terminal Cover (Satin Finish) – the ultimate choice for discerning enthusiasts.


AUTOTECKNIC - Corporate Logo
T#:21045531
Part#: ATK-BM-0008-G8X-
Ships in 8 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time!
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39329307
Part#: BM-0388-DCG
Ships in 8 Business Days
$ 650.00 USD
Free Shipping on orders $49 and up
Perfect for BMW G80 M3 and G82/G83 M4 owners seeking a refined and aggressive engine bay upgrade, the AutoTecknic Dry Carbon V2 Engine Bay Trim Set delivers a flawless combination of style, durability, and performance.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:21045545
Part#: ATK-BM-0408-G87
Ships in 8 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
AutoTecknic's dry carbon fiber engine cover features high-quality carbon fiber that aesthetically improves the engine bay appearance. This engine cover is made of 3K twill weave pre-preg carbon fiber that creates the beauty of a uniform pattern that only dry carbon could achieve.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:21012623
Part#: ATK-BM-0420-G87
Ships in 8 Business Days
$ 495.00 USD
Free Shipping on orders $49 and up
The boldly styled G87 already touts carbon features but carbon fiber is not very often displayed in the engine bay. If you are looking to give your engine bay some carbon spark, AUTOTECKNIC introduces you to their dry carbon battery terminal cover to beautify your engine bay and bring a smile to your face every time you open the hood of your S58 monster! Made from high-quality carbon, this product is sure to stand the test of time!
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:5189192
Part#: TO-0407
Ships in 8 Business Days
$ 550.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's dry carbon fiber engine cover features high-quality carbon fiber that aesthetically improves the engine bay appearance. This engine cover is made of 3K twill weave pre-preg carbon fiber that creates the beauty of a uniform pattern that only dry carbon could. achieve. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39497962
Part#: BM-0707
Ships in 8 Business Days
$ 549.99 USD
Free Shipping on orders $49 and up
Turner Motorsport offers this high-quality AutoTecknic Pre-Preg Carbon Engine Cover, ensuring BMW X3M and X4M owners can upgrade their vehicle with a refined, performance-oriented aesthetic.

AUTOTECKNIC - Corporate Logo
T#:21209809
Part#: ATK-BM-0008-G42-
Ships in 8 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39329324
Part#: BM-0408
Ships in 8 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
Experience the power of premium dry carbon fiber and make a bold statement on the road. Upgrade your G87 M2 with confidence and unleash the true potential of your engine with this exquisite dry carbon fiber cover.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39971048
Part#: BM-0008
Ships in 8 Business Days
$ 64.99 USD
Free Shipping on orders $49 and up
A precision-crafted dry carbon fiber upgrade that enhances the engine bay of compatible BMW and MINI vehicles with a lightweight, motorsport-inspired design and easy OEM-style installation
Ferrea - Corporate Logo
T#:29035336
Part#: FER-HPVK-B58-T28
Ships in 4 Business Days
$ 1,059.99 USD
Free Shipping on orders $49 and up
The BMW B58 engine can significantly benefit from the high-performance Ferrea valve kit, featuring the renowned Ferrea Competition Plus Valves. Known as the industry’s most dependable extreme-duty valves, these valves are crafted using special aerospace-grade alloys, including the high tensile strength EV8-Z18. To ensure unparalleled quality, an exclusive two-step slow forging process is utilized, promoting optimal grain flow and minimizing material structure damage. Additionally, the valves undergo a rigorous 48-hour heat treatment and stress-relieving process, crucial for maintaining their molecular integrity. The final touch is the application of avionics-quality hard chrome and a specially hardened tip, ensuring exceptional durability and reliability.
Show More Show Less
Ferrea - Corporate Logo
T#:29035337
Part#: FER-HPVK-B58-T29
Ships in 4 Business Days
$ 929.00 USD
Free Shipping on orders $49 and up
The BMW B58 engine can significantly benefit from the high-performance Ferrea valve kit, featuring the renowned Ferrea Competition Plus Valves. Known as the industry’s most dependable extreme-duty valves, these valves are crafted using special aerospace-grade alloys, including the high tensile strength EV8-Z18. To ensure unparalleled quality, an exclusive two-step slow forging process is utilized, promoting optimal grain flow and minimizing material structure damage. Additionally, the valves undergo a rigorous 48-hour heat treatment and stress-relieving process, crucial for maintaining their molecular integrity. The final touch is the application of avionics-quality hard chrome and a specially hardened tip, ensuring exceptional durability and reliability.
Show More Show Less


Genuine BMW M Performance - Corporate Logo
T#:546126
Part#: 11122447241
Ships in 4 Business Days
2% off MSRP $ 2,300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,252.99 USD
Free Shipping
2% off MSRP
$ 2,300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,252.99 USD
Free Shipping

BMW offers their M Performance retrofit kit for your 340i xDrive Gran Turismo for increased power and a more aggressive sounding and free flowing exhaust! This system directly from BMW is perfect for those looking for more power and an aggressive exhaust note without voiding the warranty! Upon installation, an immediate improvement is noticed, especially in the low to mid range powerband. The kit increases your vehicle’s power by 35 hp to 355hp and 39 lb-ft of torque to 369 lb-ft (355 lb-ft for manual transmission vehicles).The BMW M Performance Power kit now comes bundled with a higher flowing, valve controlled exhaust for maximum performance and exhilaration! The BMW M Performance Power Kit features engine tuning software and an electronically controlled valve exhaust system that is actuated in Sport/Sport+ modes via the driving experience control button. 

Included with the Power and Sound Kit:

  • M Performance Muffler
  • M Performance Decal Kit
  • Stick on label and Badge
  • Performance BMW software upgrade code
  • Wiring Harness

After ordering this kit, simply take this to your dealer to have the ECU re-flashed and all of the components included installed! 

The muffler included must also be used with the following BMW exhaust tips:

*Dealer pricing for installation varies from dealer to dealer. Please contact your dealer for installation cost before purchasing.
 

Show More Show Less
Mosselman BMW N55 PWG Upgrade Turbocharger, MSL48-60
For vehicles with Pneumatic Wastegate
Mosselman Turbosystems - Corporate Logo
T#:12872411
Part#: 10201016
Ships in 7 Business Days
$ 3,239.00 USD
Free Shipping on orders $49 and up
This Mossleman upgraded turbocharger will bring reliable high performance to your N55 PWG engine! Depending on modifications done to the vehicle, this turbo can deliver up to 600hp!