Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:599759
Part#: 11377603979KT2
In Stock
Sale - Save 10% $ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Sale - Save 10%
$ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Includes actuator, actuator gasket and valve cover gaskets
Packaged by Turner - Corporate Logo
T#:23714967
Part#: NSERIESIGNCOILKT
In Stock
$ 205.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:637846
Part#: 1142753729312KT1
In Stock
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:583537
Part#: S5XPISKT
In Stock
Sale - Save 24% $ 269.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.78 USD
Free Shipping
Sale - Save 24%
$ 269.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.78 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Packaged by Turner - Corporate Logo
T#:30164593
Part#: 11120034108KT3
In Stock
Sale - Save 8% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:42099850
Part#: 11142247867TKT
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Protect your BMW engine and drivetrain with the OE Rear Main/Crankshaft Seal Kit, a critical upgrade for leak-free performance and longevity.

Packaged by Turner - Corporate Logo
T#:5403248
Part#: 11427537293TMSKT
In Stock
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:30197943
Part#: 11127846359KT3
In Stock
Sale - Save 21% $ 509.99

This product was last offered at the strikethrough price on
04-17-2026

$ 404.08 USD
Free Shipping on orders $49 and up
Sale - Save 21%
$ 509.99

This product was last offered at the strikethrough price on
04-17-2026

$ 404.08 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Assembly Valve Cover Gaskets Gasket Flange CCV Hose Hardware Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:24145950
Part#: B48LMTTOSKT
In Stock
$ 96.99 USD
Free Shipping on orders $49 and up
To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: 6L Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with o-ring Oil Drain Plug with o-ring
Show More Show Less

Packaged by Turner - Corporate Logo
T#:23913951
Part#: F3XN55MVCKT
In Stock
Sale - Save 20% $ 406.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.31 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 406.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.31 USD
Free Shipping on orders $49 and up
If your valve cover has become cracked or warped, replace it with this quality Aluminum Valve Cover from Bremmen Parts to prevent leaks and further valvetrain damage. The upgraded aluminum valve cover included in this kit is the perfect solution to replace standard plastic valve covers that crack and split over time, leading to oil leaks! This kit includes everything needed to install a new valve cover, including a new CCV hose, gaskets, and hardware.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:587391
Part#: 11287628661ABKT
In Stock
$ 171.99

This product was last offered at the strikethrough price on
06-09-2026

$ 153.99 USD
Free Shipping
$ 153.99 USD
Free Shipping
This kit includes the basic components recommended to replace when it comes time to swap out your accessory belt.
Packaged by Turner - Corporate Logo
T#:25805743
Part#: 11367585425TKT
In Stock
Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:15677580
Part#: 11427540759-KT
In Stock
Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD
Free Shipping on orders $49 and up
This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)
Packaged by Turner - Corporate Logo
T#:583536
Part#: N52PISKT
In Stock
Sale - Save 20% $ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 194.75 USD
Free Shipping
Sale - Save 20%
$ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 194.75 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Packaged by Turner - Corporate Logo
T#:52621839
Part#: 008731KT1
In Stock
New Item
Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:641289
Part#: FXXCET-R
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired red color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:21702986
Part#: F0XF1XCOOLANTKT
In Stock
Sale - Save 23% $ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD
Free Shipping on orders $49 and up
Elevate your F0X / F1X turbocharger performance and reliability with the Packaged by Turner Kit, meticulously designed to cater to your needs. Benefit from Enhanced Turbocharger Functionality: Improved Cooling: Our Turbocharger Coolant Supply and Return Lines are engineered to enhance coolant circulation, effectively regulating turbocharger temperatures for optimal performance. Precision Fit: Included gasket rings and hose clamps guarantee a snug and secure fit, preventing leaks and ensuring the longevity of your turbocharger system. Enhanced Reliability: By preventing coolant leaks and maintaining consistent temperatures, our kit promotes the reliability and durability of your turbocharger system, ultimately extending its lifespan. Kit Includes: Turbocharger Coolant Return Line - Cylinders 1-4 Turbocharger Coolant Supply Line - Cylinders 1-4 Turbocharger Coolant Return Line - Cylinders 5-8 Turbocharger Coolant Supply Line - Cylinders 5-8 8 Gasket Ring 3 Hose Clamp This kit fits these BMW models: F01/F02 - 750i, 750Li F06/F12/F13 - 650i F07/F10 - 550i
Show More Show Less
Macht Schnell - Corporate Logo
T#:593749
Part#: 10.00.011
Ships in 4 Business Days
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation
Show More Show Less

Packaged by Turner - Corporate Logo
T#:13463763
Part#: 11247838088DBEKT
Ships on Aug 10, 2026
$ 974.99

This product was last offered at the strikethrough price on
07-02-2026

$ 971.99 USD
Free Shipping on orders $49 and up
$ 971.99 USD
Free Shipping on orders $49 and up
Don't fall victim to the notorious rod bearing issues of the S65 engine in your BMW E90, E92, or E93 M3, especially if your engine has higher mileage. Protect your engine from catastrophic failure by proactively replacing your rod bearings. BE Bearings, in collaboration with Clevite, a leading OE bearing manufacturer, has revolutionized rod bearings for your peace of mind. Our redesigned bearings offer enhanced clearance and feature a shift from the original tin-aluminum composition to lead-copper. This upgrade incorporates the cutting-edge Clevite Tri-Metal design and boasts a Tri-Armor™ coating, ensuring superior lubrication for wear prevention. Moreover, these softer bearings are gentler on your engine and more tolerant of foreign particles suspended in your oil. Additionally, this upgrade enables precise wear assessment through oil testing. Our comprehensive kit includes: Upper and lower BE Bearings upgraded rod bearings Essential hardware Oil filter Oil pan gasket RedLine assembly lube Secure your BMW E90, E92, or E93 M3's engine with our rod bearing kit and enjoy peace of mind on the road.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5403247
Part#: 11132210959TMSKT
In Stock
Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Sale - Save 3%
$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Goldenwrench Supply Co - Corporate Logo
T#:641286
Part#: FXXOCC-R
In Stock
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired red color. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:401664
Part#: VSK4KT2
In Stock
$ 143.84 USD
Free Shipping
$ 143.84 USD
Free Shipping

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges. 

Includes

  • Shim set 
  • Installation tool #83300493743
  • 16 Blade Feeler gauge set 

BMW recommends S54 valve inspection and adjustment every 30k miles.

*Click here for valve adjustment instructions*

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5403237
Part#: 11247838088TMSKT
Ships on Aug 10, 2026
$ 1,111.99 USD
Free Shipping
$ 1,111.99 USD
Free Shipping
Includes everything needed for a rod bearing service, featuring BE Bearings upgraded rod bearings. The S65 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. BE Bearings, in conjunction with Clevite, an OE bearing manufacturer, have redesigned and manufactured the bearings for greater clearance and have changed the original material composition from tin-aluminum to lead-copper. This upgrade incorporated the state-of-the-art Clevite Tri-Metal design and featured a Tri-Armor™ coating. This allows for the additional lubrication for wear prevention, plus, the softer bearings are better for your engine and are more tolerant of foreign particles suspended in your oil. Another benefit from this is that the oil can now be sent for testing to accurately gauge the amount of wear occurring in the engine. Kit includes Upper and lower BE Bearings upgraded rod bearings Hardware Oil filter Castrol TWS Edge Professional 10W 60 Oil pan gasket RedLine assembly lube
Show More Show Less
Packaged by Turner - Corporate Logo
T#:392550
Part#: S54RBPDK
In Stock
Starting at $ 455.97 USD
Free Shipping
Starting at $ 455.97 USD
Free Shipping
Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).
Show More Show Less


Packaged by Turner - Corporate Logo
T#:22097553
Part#: 11287628661TKT
In Stock
Sale - Save 23% $ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5512212
Part#: 11311703717KT
In Stock
Sale - Save 33% $ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Sale - Save 33%
$ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Timing Chain Kit for the BMW M50/M52/M54 engines composed of quality parts by Bremmen Parts! Kit Contents: Lower Timing Chain Tensioner Timing Chain - Lower Lower Timing Chain Guide Rail Tensioner Piston
Show More Show Less
Packaged by Turner - Corporate Logo
T#:554448
Part#: N54ACCKT
In Stock
Sale - Save 15% $ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 169.24 USD
Free Shipping
Sale - Save 15%
$ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 169.24 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:557341
Part#: 11111318185TMSKT
In Stock
Sale - Save 2% $ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping
Sale - Save 2%
$ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:5691134
Part#: FXXOCC-B
In Stock
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in a variety of vehicles(check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:5802164
Part#: S58ECS-R
Ships in 5 Business Days
$ 178.00 USD
Free Shipping
$ 178.00 USD
Free Shipping

BMW S58 Blackline Performance Edition Red Cap Set introduces a stylish upgrade for the factory oil and coolant caps on BMW M vehicles. Meticulously designed and crafted to the highest standards, this cap set enhances the look of your engine bay with a race-inspired red finish.

  • Premium Materials: Each cap is CNC machined from T6 aluminum and anodized in a striking red color for a sleek, race-inspired appearance.
  • Precision Detailing: Logos and decorations are applied through a precision 3D milling process, providing a high-quality, premium finish.
  • Easy Installation: The billet cap covers easily affix to the top of the factory caps, allowing for quick and straightforward installation.
  • Exclusive Fitment: Designed specifically for BMW vehicles equipped with the S58 engine, including models like the F97 X3M, F98 X4M, G80 M3, and G82 M4.
  • Enhanced Aesthetics: Upgrades the plain plastic factory caps with a sophisticated and visually appealing design.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:5691129
Part#: FXXCET-B
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in a variety of M vehicles(check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:583538
Part#: M54PISKT
In Stock
Sale - Save 20% $ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping
Sale - Save 20%
$ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:641287
Part#: FXXCCT-R
In Stock
$ 52.00 USD
Free Shipping on orders $49 and up
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Charge Cooler Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired red color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Charge Cooler Reservoir Cap Cover will fit most BMW vehicles equipped with the S55 and S63 engines with the charge cooler reservoir tank found in the following vehicles: F87 M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more. Check your coolant cap ensuring that it is the same shape as seen in the product photos. Each kit comes with a Billet Charge Cooler Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less
OEM Valeo Alternator - 180amp - E9X M3 S65
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:377508
Part#: 12317837981
In Stock
$ 630.99

This product was last offered at the strikethrough price on
05-07-2026

$ 404.99 USD
Free Shipping
$ 404.99 USD
Free Shipping
This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!
Packaged by Turner - Corporate Logo
T#:25772568
Part#: 11127565284MTKT
In Stock
Sale - Save 23% $ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
The stock plastic valve cover from BMW tends to warp and crack over time due to numerous heat cycles. This leads to oil and vacuum leaks that both make a mess and negatively affect performance and reliability. Replace your stock valve cover with this aluminum upgrade from Bremmen Parts to eliminate these issues! The aluminum construction results in a significantly stronger valve cover that won't warp or crack. This kit contains everything you need to upgrade your cover, including the upgraded aluminum valve cover, valve cover gasket, oil cap, and hardware. Additionally, we've also included a new PCV blow-by hose and a Vargas PCV upgrade for additional reliability! This is especially important for tuned vehicles with upgraded turbos.
Show More Show Less


Goldenwrench Supply Co - Corporate Logo
T#:7244442
Part#: FXXOFH-R
In Stock
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping
OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Performance RED Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:3586293
Part#: FXXWFCR
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
Full replacement Billet Washer Fluid Cap for BMW F Series vehicles!
Goldenwrench Supply Co - Corporate Logo
T#:7355611
Part#: FXXWFC-B
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up

BMW F30 Blackline Washer Fluid Cap Performance - Motorsport Blue

The BMW F30 Blackline Washer Fluid Cap Performance - Motorsport Blue offers a premium upgrade for BMW F Series vehicles. This high-quality billet washer fluid cap features a no-spill seal technology, addressing common issues with washer fluid leakage from the factory reservoir. Designed and manufactured with precision, this cap replaces the factory unit with a stylish and functional enhancement.

Benefits:

  • No-Spill Seal Technology: Prevents leakage from the factory washer fluid reservoir.
  • Premium Construction: CNC machined from T6 Aluminum for durability and strength.
  • Eye-Catching Design: Anodized in Motorsport Blue for a striking appearance.
  • Precision Finish: Logos and details are 3D milled for a refined look.
  • Easy Installation: Direct replacement for the factory cap, installs in minutes.
  • Wide Compatibility: Fits most BMW F Series models (check the application guide).
Show More Show Less

Packaged by Turner - Corporate Logo
T#:24212289
Part#: 11377603979N20KT
In Stock
Sale - Save 10% $ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.63 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.63 USD
Free Shipping on orders $49 and up
If your Valvetronic Actuator has failed, this kit includes a new actuator and all of the basic gaskets necessary to replace the actuator. OEM VDO Valvetronic Actuator Actuator Gasket Valve Cover Gasket
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:5691131
Part#: FXXCCT-B
In Stock
$ 52.00 USD
Free Shipping on orders $49 and up
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Charge Cooler Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Charge Cooler Reservoir Cap Cover will fit most BMW vehicles equipped with the S55 and S63 engines with the charge cooler reservoir tank found in a variety of M Vehicles. Check your coolant cap ensuring that it is the same shape as seen in the product photos. Each kit comes with a Billet Charge Cooler Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:20946753
Part#: 11122247447TMSKT
In Stock
Sale - Save 2% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD
Free Shipping on orders $49 and up
Eliminate your valve cover oil leaks! This M57 Valve Cover Gasket Replacement Kit includes all of the basic gaskets and seals necessary to replace your valve cover gasket and prevent further oil leaks. Included: Valve Cover Gaskets & Hardware Fuel Injector O-Rings (x6) Fuel Injector Gaskets (x6) Turbo Oil Line Seals (x6)
Show More Show Less

Packaged by Turner - Corporate Logo
T#:22163422
Part#: 11287568247TKT
Ships in 7 Business Days
Sale - Save 15% $ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:6635754
Part#: S55TUBOINSTKT
In Stock
$ 344.99

This product was last offered at the strikethrough price on
06-19-2026

$ 343.99 USD
Free Shipping
$ 343.99 USD
Free Shipping
Ensure proper sealing when installing the turbos on your S55. This kit includes all standard replacement and necessary installation components, including: 2x Exhaust manifold gaskets 20x Exhaust manifold nuts 2x Oil Drain Gaskets 2x Oil drain O-rings 4x Oil Feed O-rings 6x Coolant connection O-rings 2x Turbo to downpipe gaskets 2x Downpipe to Exhaust gaskets
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:7750497
Part#: G8XWFC-R
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
Introducing the full replacement Billet Washer Fluid Cap for BMW G8x M3/M4! Built-in with a no spill seal technology to solve for the leaking of washer fluid from the factory washer fluid reservoir. These are the most complex Goldenwrench pieces created to date. Meticulously designed and created in-house to the highest precision and quality seen on our other products replacing the factory unit with an all-new form factor. We bring to you the newest addition to the BLACKLINE Performance product line for BMW G8x M3/M4. Give the plain plastic factory cap an upgrade with our brand new BLACKLINE Performance Washer Fluid Cap. Each cap is CNC formed from T6 Aluminum and anodized with a Motorsport Red color. All logos and decorations are finalized through our precision 3D milling process, machined into each cap for the ultimate premium finish. Each kit comes with the Billet Washer Fluid Cap, and an Installation Instruction Card. This is a full replacement unit getting rid of the factory cap installing easily in minutes.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:587390
Part#: 11287594969ABKT
In Stock
Sale - Save 29% $ 89.15

This product was last offered at the strikethrough price on
06-29-2026

$ 62.94 USD
Free Shipping
Sale - Save 29%
$ 89.15

This product was last offered at the strikethrough price on
06-29-2026

$ 62.94 USD
Free Shipping
This kit includes the basic components recommended to replace when it comes time to swap out your accessory belt.
Packaged by Turner - Corporate Logo
T#:582210
Part#: S54WVALVESHIMKT
Ships in 7 Business Days
$ 227.27 USD
Free Shipping
$ 227.27 USD
Free Shipping
Packaged by Turner - Corporate Logo
T#:21012589
Part#: N20N26TIMINGCHAI
Ships in 6 Business Days
Sale - Save 5% $ 780.99

This product was last offered at the strikethrough price on
06-12-2026

$ 743.49 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 780.99

This product was last offered at the strikethrough price on
06-12-2026

$ 743.49 USD
Free Shipping on orders $49 and up
Eliminate N20/N26 Timing Chain Woes with Our Comprehensive Kit – Get Your BMW Back on Track!


Packaged by Turner - Corporate Logo
T#:21933066
Part#: S55IGKT
In Stock
Sale - Save 13% $ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD
Free Shipping on orders $49 and up
Sale - Save 13%
$ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD
Free Shipping on orders $49 and up
Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
OEM Starter Motor - E46 M3 2001-2006
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:2988
Part#: 12417835735
In Stock
$ 400.99

This product was last offered at the strikethrough price on
05-07-2026

$ 293.99 USD
Free Shipping
$ 293.99 USD
Free Shipping
This is the starter motor for BMW E46 M3 2001-2006 is an OEM Valeo unit.

This item fits the following BMWs:
2001-2006 E46 BMW M3. M3 Convertible
2001-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2005-2008 E85 BMW Z4 M Roadster Z4 M Coupe
Show More Show Less