Precision Raceworks BMW Fuel System Parts

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

T#:38161741

Part#: 622-0268

Ships in 10 Business Days

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit includes Precision Raceworks' 4 Bar static micro fuel regulator. This regulator is the simplest way to move your fuel pressure regulation to the engine bay, requiring no adjustment or vacuum lines.

Show More Show Less

Precision Raceworks Upgraded Hybrid Primary Fuel Pump - Stage 2 - G80...

T#:38161753

Part#: 601-0289-G8X

Ships in 10 Business Days

$ 649.99 USD

Add to Wish List

Qty

$ 649.99 USD

Add to Wish List

Precision Raceworks' G-Series G8x High-Performance Primary Fuel Pump Kits are designed for enthusiasts running all blends of E85. They are also perfect for those seeking a streamlined setup with a single fuel line supplying both the high-pressure fuel pump and port injection. This Stage 2 bucketed/bucketless hybrid fuel pump kit delivers 450 LPH at 5 Bar and includes everything needed for a quick and hassle-free upgrade from the stock pump. It retains the OEM brushless pump inside the bucket while integrating a Walbro 450 (F90000274) fuel pump externally, supporting up to 850whp on pump gas and 800whp on 100% E85.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - E7x X5...

T#:38195416

Part#: 601-0128

Ships in 10 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E7x X5/X6 High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes two Walbro 450 (F90000274) fuel pumps, capable of supporting up to 900whp on 93 octane pump gas or 800whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready.

Show More Show Less

Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 4...

T#:47679265

Part#: 601-0350

Ships in 10 Business Days

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on!

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 3.75 v2 (Kit Only) - ...

T#:37993458

Part#: 622-0137

Ships in 10 Business Days

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

90 Degree Fuel Line Fitting AN6 PTFE To AN6 ORB Male Swivel ...

T#:38094336

Part#: 201-0189

Ships in 10 Business Days

$ 26.99

This product was last offered at the strikethrough price on
01-22-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The AN-6 PTFE 90-Degree Fitting to 9.89mm Female Quick Connect features a durable air-hose-style quick-release for secure, corrosion resistant coating and a leak-free connection for high-performance applications.

Show More Show Less

45 Degree Fuel Line Fitting PTFE To Female Flare AN6

T#:38094333

Part#: 201-0231

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Whether you're modifying your fuel lines for increased horsepower, adding a secondary fuel system, or upgrading to a more efficient setup, this 45-degree plug-and-play PTFE fitting delivers unmatched performance, easy installation, and rock-solid reliability.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3.5 - BMW ...

T#:38195443

Part#: 601-0123

Ships in 10 Business Days

$ 984.99 USD

Add to Wish List

Qty

$ 984.99 USD

Add to Wish List

The Precision Raceworks F-Series High Performance Fuel Pumps are designed for customers looking to run all blends of E85. These drop-in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and is 100% E85 compliant. Best of all this pump ships completely assembled and ready to install, no core charge! New pump, new fuel filter, and new sending unit included! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Our Stage 3 .5 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts a single primary Walbro 450 (F90000274) fuel pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support 950whp (Rated for 875whp on 100% E85) and is drop-in ready. No wires to cut or splice, and nothing to assemble, simply drop the bucketless system into the tank, insert the factory pump, mount the bucketless to the side of the bucket, and close the top hat - you are ready to go!

Show More Show Less

Swivel Fuel Line Fitting AN6 PTFE To AN6 ORB

T#:38094346

Part#: 201-0175

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Upgrade your fluid system with a reliable, Precision Raceworks AN-6 PTFE fitting to AN-6 ORB, designed for maximum efficiency and ease of installation.

Bucketed High Performance Fuel Pump Kit - Stage 3.5 (Kit Only) - BMW ...

T#:22130453

Part#: 622-0046

Ships in 10 Business Days

$ 799.99 USD

Add to Wish List

Qty

$ 799.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

PTFE AN6 Fitting To Male AN6 Flare

T#:38094326

Part#: 201-0243

Ships in 10 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

A PTFE AN6 fitting to male AN6 flare is commonly used in fuel or fluid systems. The PTFE AN6 fitting ensures a secure connection to a PTFE hose, offering superior resistance to heat, pressure, and chemicals. The male AN6 flare fitting provides a tight, leak-proof seal, ideal for high-performance applications that require dependable, durable connections.

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 2.5 v2 (Kit Only) - B...

T#:37993460

Part#: 601-0075

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 5...

T#:35559427

Part#: 601-0336

Ships in 10 Business Days

$ 1,949.99 USD

Add to Wish List

Qty

$ 1,949.99 USD

Add to Wish List

The Precision Raceworks X3/X3M (G01/F97) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on! Features & Benefits Billet Aluminum top hat with 3 high-flow fuel ports Dedicated fuel pump(s) for port injection system Optimal pump location resistant to fuel slosh under acceleration Fully adjustable 1:1 scaling billet fuel pressure regulator 10-micron USA made Microglass fuel filter (Ideal for E85) Smooth bore high flow PTFE fuel feed & return lines (AN6) All billet connections for both fuel line fittings and top-hat Plug and play connectors inside and outside* the top hat Configurable pump activation harness (see instructions for more details) Increased injector flow (when using 1:1 regulator feature vs static) Compatible with all stock or upgraded primary fuel pumps Easily expandable and upgrade-able for more fuel All components and parts feature 100% Ethanol Compatibility The AFS.800 dedicated auxiliary fuel system comes with all** necessary components to provide a dedicated fuel system for port injection. Featuring Two Walbro 535’s (F9000295) fuel pumps with a combined flow of 800LPH at 3 bar. Pump flow 43.5 psi-a : 800 lph Recommended base pressure: 43.5 psi-g Maximum Fuel Pressure: 110 psi-g Number of Fuel Output Ports: 2 Number of Fuel Return Ports: 1 Pump 1: Walbro 535 (F90000295) Pump 2: Walbro 535 (F90000295) Available (unused) Electrical Connections: 2* Total System Weight:14 lbs (including fuel lines and wiring harness) *At time of install some wiring in the car may need to be cut and spliced to connectors included in this kit on older models **The AFS kits are designed for use with a port injection kit where the fuel rail is mounted above the manifold. To use with a plate style spacer PI, please reach out to us directly at 713-770-6977 or [email protected]

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 4 Bar

T#:38195450

Part#: 601-0259

Ships in 10 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Precision Raceworks PTFE Fuel Line Fitting - AN-6 To 7.89mm Female QC...

T#:38094320

Part#: 201-0178

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

he Precision Raceworks PTFE Fuel Line Fitting is a 180-degree AN-6 female flare fitting designed for high-performance fuel systems.onstructed from durable PTFE material, it ensures compatibility with various automotive applications.his universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. *Features:** **AN-6 Compatibility:** Designed to connect AN-6 male flare fittings to AN-6 female flare fittings at a 180-degree angle. **Durable Construction:** Made from high-quality PTFE material for enhanced durability and resistance to fuel additives. **Universal Fitment:** Suitable for a wide range of vehicle platforms, offering flexibility in fuel line routing. **High-Performance Design:** Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. or more information, visit the product page:citeturn0search0

Show More Show Less

Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 4...

T#:35087392

Part#: 601-0283

Ships in 10 Business Days

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

The Precision Raceworks G8x/G2x Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection!

Since direct injection came out for BMW, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential.

Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check.

With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on!

Features & Benefits

Billet Aluminum top hat with 3 high-flow fuel ports

Dedicated fuel pump(s) for port injection system

Optimal pump location resistant to fuel slosh under acceleration

Fully adjustable 1:1 scaling billet fuel pressure regulator

10-micron USA made Microglass fuel filter (Ideal for E85)

Smooth bore high flow PTFE fuel feed & return lines (AN6)

All billet connections for both fuel line fittings and top-hat

Plug and play connectors inside and outside* the top hat

Configurable pump activation harness (see instructions for more details)

Increased injector flow (when using 1:1 regulator feature vs static)

Compatible with all stock or upgraded primary fuel pumps

Easily expandable and upgrade-able for more fuel

All components and parts feature 100% Ethanol Compatibility

The AFS.640 dedicated auxiliary fuel system comes with all** necessary components to provide dedicated fuel system for port injection. Featuring Two Walbro 450’s (F9000274) fuel pumps with a combined flow of 640LPH at 3 bar.

Pump flow 43.5 psi-a : 640 lph

Recommended base pressure: 43.5 psi-g

Maximum Fuel Pressure: 110 psi-g

Number of Fuel Output Ports: 2

Number of Fuel Return Ports: 1

Pump 1: Walbro 450 (F90000274)

Pump 2: Walbro 450 (F90000274)

Available (unused) Electrical Connections: 2*

Total System Weight: 14 lbs (including fuel lines and wiring harness)

*At time of install some wiring in the car may need to be cut and spliced to connectors included in this kit

**Male AN8-ORB to Female AN6-ORB adapter may be required for compatibility with some fuel rails (not included in kit)

Show More Show Less

Precision Raceworks Port Injection Fuel Line For Manifold Kit - BMW G...

T#:47679253

Part#: 201-0358

Ships in 10 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Use this fuel line kit to replace the OEM flex line from the fender to the HPFP and add an AN6 tee for adding Port Injection. Port Injection Line included

Bucketed High Performance Fuel Pump Kit - Stage 4 (Kit Only) - BMW E-...

T#:37993459

Part#: 622-0047

Ships in 10 Business Days

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N20/N26 2.0...

T#:38262761

Part#: 601-0167

Ships in 10 Business Days

$ 929.99 USD

Add to Wish List

Qty

$ 929.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors. This kit features 750cc* injectors (this flow rate is based on industry injector flow test pressure of 43.5psi). These are the same ones found in our N54/N55/S55 port injection kit and will provide all the supplemental fuel even your largest HP N20 & N26 motors can handle. Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 3 (Kit Only) - BMW E-...

T#:27338719

Part#: 622-0022

Ships in 10 Business Days

$ 724.99 USD

Add to Wish List

Qty

$ 724.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks Stand Alone Auxiliary Fuel System - Walbro 535 Pu...

T#:35559415

Part#: 601-0282

Ships in 10 Business Days

$ 1,574.99 USD

Add to Wish List

Qty

$ 1,574.99 USD

Add to Wish List

The Precision Raceworks G8x/G2x Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection!

Since direct injection came out for BMW, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential.

Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check.

With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on!

Features & Benefits

Billet Aluminum top hat with 3 high-flow fuel ports

Dedicated fuel pump(s) for port injection system

Optimal pump location resistant to fuel slosh under acceleration

Fully adjustable 1:1 scaling billet fuel pressure regulator

10-micron USA made Microglass fuel filter (Ideal for E85)

Smooth bore high flow PTFE fuel feed & return lines (AN6)

All billet connections for both fuel line fittings and top-hat

Plug and play connectors inside and outside* the top hat

Configurable pump activation harness (see instructions for more details)

Increased injector flow (when using 1:1 regulator feature vs static)

Compatible with all stock or upgraded primary fuel pumps

Easily expandable and upgrade-able for more fuel

All components and parts feature 100% Ethanol Compatibility

The AFS.460 dedicated auxiliary fuel system comes with all** necessary components to provide dedicated fuel system for port injection. Featuring a single Walbro 535 (F9000295) fuel pump which flows 460LPH at 3 bar.

Pump flow 43.5 psi-a : 460 lph

Recommended base pressure: 43.5 psi-g

Maximum Fuel Pressure: 110 psi-g

Number of Fuel Output Ports: 2

Number of Fuel Return Ports: 1

Pump 1: Walbro 535 (F90000295)

Pump 2: N/A

Available (unused) Electrical Connections: 4*

Total System Weight: 11 lbs (including fuel lines and wiring harness)

*At time of install some wiring in the car may need to be cut and spliced to connectors included in this kit

**Male AN8-ORB to Female AN6-ORB adapter may be required for compatibility with some fuel rails (not included in kit)

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Black Anodized - 750cc I...

T#:38229125

Part#: 601-0270

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E6...

T#:38195412

Part#: 601-0208

Ships in 10 Business Days

$ 919.99 USD

Add to Wish List

Qty

$ 919.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed hybrid fuel pump (one in bucket, one mounted outside bucket) comes with dual Walbro 450 (F90000274) fuel pumps, capable of supporting up to 1000whp on 93 octane pump gas or 850whp on 100% E85! Simply connect your secondary pump activation harness and install the new fuel pump in the tank, 100% OEM quality and drop-in ready.

Show More Show Less

AN6 Male Flare/ORB To 3/8" Female Quick Connect

T#:38094330

Part#: 201-0206

Ships in 10 Business Days

$ 26.99

This product was last offered at the strikethrough price on
01-22-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 3/8" Female Quick Connect is a premium fitting designed for fluid and fuel systems. The AN6 male flare/ORB fitting ensures a secure, leak-proof connection with an O-ring boss design. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, making it perfect for high-performance setups that require both reliability and quick access.

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Silver Anodized - 750cc ...

T#:38229127

Part#: 601-0276

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

Vise Jaws For AN Fittings

T#:38094329

Part#: 101-0228

Ships in 10 Business Days

$ 36.99

This product was last offered at the strikethrough price on
01-22-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Vise jaws for AN fittings are essential tools that securely hold AN fittings during assembly or disassembly. Made from soft aluminum or plastic, they prevent damage by firmly gripping the fittings without scratching or marring the surface. These jaws help preserve the integrity of threads and sealing surfaces, ensuring leak-proof and reliable connections in fuel or fluid systems.

Show More Show Less

90 Degree Fitting PTFE AN6 To 9.89 Female QC

T#:38094334

Part#: 201-0233

Ships in 10 Business Days

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The AN-6 PTFE 90-Degree Fitting to 9.89mm Female Quick Connect is designed for seamless fuel system integration, featuring a durable air-hose-style quick-release for secure, leak-free connections in high-performance applications.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3.75 - BMW...

T#:38195444

Part#: 601-0124

Ships in 10 Business Days

$ 1,059.99 USD

Add to Wish List

Qty

$ 1,059.99 USD

Add to Wish List

The Precision Raceworks F-Series High Performance Fuel Pumps are designed for customers looking to run all blends of E85. These drop-in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and is 100% E85 compliant. Best of all this pump ships completely assembled and ready to install, no core charge! New pump, new fuel filter, and new sending unit included! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Our Stage 3.75 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts a single primary Walbro 535 (F90000295) fuel pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support OVER 1,000whp! (Rated for 950whp on 100% E85) and is drop-in ready. No wires to cut or splice, and nothing to assemble, simply drop the bucketless system into the tank, insert the factory pump, mount the bucketless to the side of the bucket and close the top hat - you are ready to go!

Show More Show Less

Black Market Parts Multi-Port Injection Kit - No Injectors Included -...

T#:21703012

Part#: 601-0223

Ships in 10 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 600rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection (except injectors) and is 100% e85 compliant. Simply pick up this kit and pair it with your favorite injectors and injector controller and you are ready to go!

Show More Show Less

PTFE To AN-6 Female Flare - Fuel Line Fitting

T#:38094323

Part#: 201-0179

Ships in 10 Business Days

$ 15.99

This product was last offered at the strikethrough price on
01-22-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Precision Raceworks PTFE to AN-6 Female Flare Fuel Line Fitting is designed for high-performance fuel systems. Constructed from durable PTFE material, it ensures compatibility with various automotive applications. This universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. Features: AN-6 Compatibility: Designed to connect PTFE fuel lines to AN-6 female flare fittings, ensuring a secure and leak-free connection. Durable Construction: Made from high-quality PTFE material, offering resistance to fuel additives and high temperatures. Universal Fitment: Suitable for a wide range of vehicles, providing flexibility in fuel line routing. High-Performance Design: Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. For more information, visit the product page on Precision Raceworks' website.

Show More Show Less

Inline Fuel Filter AN8 Single In/Out - 10 Micron | Precision Racework...

T#:38161699

Part#: 501-0113

Ships in 10 Business Days

$ 157.99

This product was last offered at the strikethrough price on
01-22-2026

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks is a high-performance fuel filtration solution designed for BMW and other high-performance applications. This inline fuel filter ensures superior filtration, protecting your engine from contaminants that can compromise fuel system performance.

Crafted from high-quality billet aluminum, the filter body is precision-machined for durability and reliability. Featuring AN8 female ORB fittings on each end, this universal-fitment filter integrates seamlessly into custom fuel setups, making it ideal for both street and track applications.

Precision-machined billet aluminum construction – Ensures strength, durability, and long-lasting performance
AN8 female ORB fittings – Compatible with a wide range of fuel system setups
High-flow filtration – Effectively removes contaminants to protect fuel injectors and engine components
Universal fitment – Ideal for custom fuel system configurations in BMW and other performance vehicles
Corrosion-resistant anodized finish – Provides excellent protection against fuel and environmental factors
Reliable and efficient fuel delivery – Supports high-performance and racing applications

Note: Mounting hardware is not included.

Ensure clean and efficient fuel delivery with the Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks, engineered for high-performance reliability.

Show More Show Less

AN 6 Fuel Lines With Ethanol Sensor Connections - E60

T#:11399224

Part#: 201-0225

Ships in 6 Business Days

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

This is an OEM quality solution is direct plug and play replacement for the factory line to help you achieve the needs of your high horsepower build on E85.

PTFE AN6 Fitting To Male AN6 ORB

T#:38094327

Part#: 201-0237

Ships in 10 Business Days

$ 15.99

This product was last offered at the strikethrough price on
01-22-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 fitting to male AN6 ORB is a premium component designed for high-performance fuel and fluid systems. The PTFE AN6 fitting provides a secure connection to a PTFE hose, offering superior durability and resistance to heat, pressure, and chemicals. The male AN6 ORB fitting features an O-ring boss design, guaranteeing a leak-proof, reliable connection in demanding applications.

Show More Show Less

Precision Raceworks S58 Port Injection Kit - Silver Anodized - No Inj...

T#:38229124

Part#: 601-0280

Ships in 10 Business Days

$ 649.99 USD

Add to Wish List

Qty

$ 649.99 USD

Add to Wish List

The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!

Show More Show Less

Precision Raceworks - Dummy Ethanol Sensor 3/8" Male QC To 3/8" Male ...

T#:38094347

Part#: 201-0232

Ships in 10 Business Days

$ 16.99

This product was last offered at the strikethrough price on
01-26-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Whether upgrading your fuel system for performance or simply eliminating unnecessary components, this fitting provides an efficient and reliable way to enhance your fuel delivery setup by removing your ethanol sensor

Show More Show Less

Double Female 90 Degree 9.89 QC

T#:38094349

Part#: 201-0230

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Enhance your fuel system with the Precision Raceworks 90-degree double quick connect, and experience the convenience of professional-grade fittings designed for high-performance applications.

9.49 (3/8") PTFE AN6 90 Degree Fitting To Female QC

T#:38094339

Part#: 201-0227

Ships in 10 Business Days

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Upgrade your fuel system with the Precision Raceworks 90-degree fitting, and experience the convenience of air hose-style quick connects for efficient and easy-to-manage fuel system setups.

Precision Raceworks Universal AN8 Male ORB To AN6 Female ORB Adapter ...

T#:38161735

Part#: 201-0404

Ships in 5 Business Days

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Use this adapter to convert your AN8 fuel rail to AN6 female ORB with this helpful fitting!

Precision Raceworks Stand Alone Auxiliary Fuel System - Walbro 535 Pu...

T#:35559420

Part#: 601-0342

Ships in 10 Business Days

$ 1,574.99 USD

Add to Wish List

Qty

$ 1,574.99 USD

Add to Wish List

The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on! Features & Benefits Billet Aluminum top hat with 3 high-flow fuel ports Dedicated fuel pump(s) for port injection system Optimal pump location resistant to fuel slosh under acceleration Fully adjustable 1:1 scaling billet fuel pressure regulator 10-micron USA made Microglass fuel filter (Ideal for E85) Smooth bore high flow PTFE fuel feed & return lines (AN6) All billet connections for both fuel line fittings and top-hat Plug and play connectors inside and outside* the top hat Configurable pump activation harness (see instructions for more details) Increased injector flow (when using 1:1 regulator feature vs static) Compatible with all stock or upgraded primary fuel pumps Easily expandable and upgrade-able for more fuel All components and parts feature 100% Ethanol Compatibility The AFS.460 dedicated auxiliary fuel system comes with all** necessary components to provide a dedicated fuel system for port injection. Featuring a single Walbro 535 (F9000295) fuel pump which flows 460LPH at 3 bar. Pump flow 43.5 psi-a : 460 lph Recommended base pressure: 43.5 psi-g Maximum Fuel Pressure: 110 psi-g Number of Fuel Output Ports: 2 Number of Fuel Return Ports: 1 Pump 1: Walbro 535 (F90000295) Pump 2: N/A Available (unused) Electrical Connections: 4* Total System Weight: 11 lbs (including fuel lines and wiring harness) **The AFS kits are designed for use with a port injection kit where the fuel rail is mounted above the manifold. To use with a plate-style spacer PI, please reach out to us directly at 713-770-6977 or [email protected]

Show More Show Less

Precision Raceworks Port Injection Plugs - Replaces EV14 Style Inject...

T#:18003817

Part#: PRINJPLGS

Ships in 9 Business Days

$ 10.99

This product was last offered at the strikethrough price on
01-22-2026

Starting at $ 9.99 USD

Add to Wish List

Starting at $ 9.99 USD

Add to Wish List

Use these in replacement of any standard short body EV14 style injector. These include appropriate o-rings for any of Precision Raceworks' port injection kits, including their aftermarket manifolds. Unlike other injector plugs, these feature shoulders to prevent the plug from sliding too far in either direction

Show More Show Less

3-Sides Fuel Line Fitting AN6 Male Flare TEE

T#:38094340

Part#: 201-0221

Ships in 10 Business Days

$ 13.99

This product was last offered at the strikethrough price on
01-22-2026

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Upgrade your fuel system with this Fuel line fitting TEE featuring AN-6 Male threads on all three ends, and enjoy a high-flow, race-ready solution built for maximum performance and reliability.

PTFE Fuel Line Fitting 180 Degree AN-6 Female Flare

T#:38094332

Part#: 201-0264

Ships in 10 Business Days

$ 29.99

This product was last offered at the strikethrough price on
01-22-2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 180-Degree AN-6 Female Flare is a high-quality component engineered for optimal fuel system routing. Its 180-degree design enables smooth, compact hose placement in confined spaces. The AN-6 female flare connection ensures a tight, leak-proof seal, while its PTFE compatibility offers superior resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

PTFE AN6 Fitting To 7.89 (5/16") Female QC

T#:38094321

Part#: 201-0228

Ships on Aug 6, 2026

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 Fitting to 7.89mm (5/16") Female Quick Connect is a 90-degree fitting designed to connect your PTFE AN-6 fuel line to a 5/16" female quick connect. It features an air-hose style quick connect for easy connections. This fitting is compatible with various automotive applications, providing flexibility in fuel line routing.

Show More Show Less

AN6 Female To AN6 Female Adapter

T#:38094328

Part#: 201-0266

Ships in 10 Business Days

$ 10.99

This product was last offered at the strikethrough price on
01-22-2026

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

The Precision Raceworks AN6 Female to AN6 Female Adapter is a durable fitting designed to join two AN6 fittings with female threads. It ensures a secure, leak-proof connection, making it perfect for fluid and fuel systems where a smooth, reliable link is needed. This adapter is commonly used to extend hose lengths or adjust configurations while keeping the same AN6 size.

Show More Show Less

PTFE Fuel Line Fitting 135 Degree AN-6 Female Flare

T#:38094331

Part#: 201-0222

Ships in 10 Business Days

$ 29.99

This product was last offered at the strikethrough price on
01-22-2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 135-Degree AN-6 Female Flare is a premium component designed for optimal fuel system routing. Its 135-degree angle enhances flexibility and provides better clearance in confined spaces. The AN-6 female flare connection ensures a secure, leak-proof fit, while its PTFE compatibility offers exceptional resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

PTFE AN6 Fitting To 3/8" Female QC With 1/8"NPT Port

T#:38094324

Part#: 201-0229

Ships in 10 Business Days

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 Fitting to 3/8" Female QC with a 1/8" NPT port is a premium component designed for fuel and fluid systems. The AN6 fitting securely connects to a PTFE hose, offering exceptional resistance to heat, pressure, and chemicals. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, while the 1/8" NPT port allows for additional connections, such as sensors or pressure gauges.

Show More Show Less

Precision Raceworks B58 Upgraded Hybrid Fuel Pump - Stage 2.5 - BMW G...

T#:50521412

Part#: 622-0298

Ships in 10 Business Days

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

The Stage 2.5 bucketed/bucketless hybrid fuel pump kit includes all necessary components to quickly and easily upgrade your stock pump. This pump kit utilizes the OEM brushless pump in the bucket and adds a Walbro 525 (F90000285) fuel pump outside the bucket. Rated for 950whp on pump gas and 900 whp on 100% E85

Show More Show Less

9.89mm To 7.89mm Fuel Line Fitting 90 Degree Double Quick Connect ...

T#:38094341

Part#: 201-0182

Ships in 10 Business Days

$ 36.99

This product was last offered at the strikethrough price on
01-22-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Engineered for seamless fuel system integration, this precision-machined 90-degree fitting is designed with a 7.89mm female quick connect on one end and a 9.89mm female quick connect on the other. Built for maximum convenience, it features an air hose-style quick connect system, ensuring effortless, secure connections without the need for special tools.

Show More Show Less

3/8" PTFE AN6 To Female Swivel QC With 1/8" NPT Port

T#:38094342

Part#: 201-0241

Ships in 10 Business Days

$ 36.99

This product was last offered at the strikethrough price on
01-22-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Upgrade your fuel system or fuel lines with this premium AN-6 PTFE fitting, enhancing reliability and performance for your build.

Replacement Ferrule For PTFE Fittings

T#:38094322

Part#: 101-0185

Ships in 10 Business Days

$ 3.99

This product was last offered at the strikethrough price on
01-22-2026

$ 3.00 USD

Add to Wish List

Qty

$ 3.00 USD

Add to Wish List

Replacement ferrules, also known as olives, are vital components for assembling PTFE fuel lines. These one-time-use metal ferrules are crimped onto the PTFE tube to form a secure, leak-proof connection with the fitting. Once crimped, they can leak if the fitting is loosened or removed. For high-performance fuel systems, Precision Raceworks provides replacement ferrules designed for PTFE fittings. These ferrules are engineered to deliver a reliable seal and preserve the integrity of your fuel line connections. When selecting replacement ferrules, it’s important to choose ones that are compatible with your specific PTFE hose and fittings to ensure maximum performance and safety.

Show More Show Less

Project Cars

SELECT YOUR BMW

Precision Raceworks BMW Fuel System Parts

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results