BMW Fuel System Parts

URO Fuel Pump Tank Seal - BMW E70/71 F15/16 F85/86

2X Entries Into Our F80 M3 Sweepstakes

T#:593021

Part#: 16117211570

Ships in 1 Business Day

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Replacement seal and clamp for your fuel pump and tank connection

ReFlex Lite Injector Harness - V8

T#:29234314

Part#: 900.1014

Ships in 4 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your V8 powered BMW! Includes x8 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

M57 Machined Stainless Injector Hold Down - Priced Each

T#:37689732

Part#: M57-IHD-1

Ships on Oct 19, 2026

$ 39.00 USD

Add to Wish List

Qty

$ 39.00 USD

Add to Wish List

E89 EKP PNP Cooler Kit - (Z4)

A Must For Cars With Upgraded LPFPs

T#:26471566

Part#: E89-EKP-PNP

Ships in 1 Business Day

Starting at $ 44.99 USD

Add to Wish List

Starting at $ 44.99 USD

Add to Wish List

The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E89 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8, which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+ or PETG, depending on the color choice. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With 5015 Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

BM3 FlexFuel Kit - Engine Bay Location - F97/F98 X3M X4M Pre-LCI ...

T#:31092490

Part#: BM3FFKT

Ships in 10 Business Days

8% off MSRP $ 649.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.00 USD

Add to Wish List

Qty

8% off MSRP

$ 649.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.00 USD

Add to Wish List

BM3 is proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW with incredible ease and minimal effort, in your own driveway. BM3's kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car! BM3's team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol! Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location. Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used. Install the BM3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled BM3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this! BM3 FlexFuel Plug and Play Kit: Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical 4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! Fully reversible/removable and back to stock without a trace in minutes Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat All connecting points sealed with fuel safe Viton o-rings Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for BM3 CustomROM v2 support CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with BM3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for BM3 Flex Fuel enabled OTS MultiMaps and custom tunes with your BM3 tuner of choice Power/CANBus 4-wire plug and play harness 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58 Continental Flex Fuel sensor 3-wire harness Custom Aluminum-6061 CANBus Enclosure for the BM3 ECA board Custom, kink-free teflon braided line allowing plug-and-play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required. -6 AN fitting by Racetronix

Show More Show Less

BMW F25 Fuel Pump Assembly

2X Entries Into Our F80 M3 Sweepstakes

T#:35863145

Part#: 16117314804

In Stock

$ 190.99 USD

Add to Wish List

Qty

$ 190.99 USD

Add to Wish List

BMW F25 Fuel Pump Assembly - 16117314804 is a high-performance replacement designed to ensure reliable fuel delivery for optimal engine performance. Engineered to meet or exceed OEM specifications, this fuel pump assembly maximizes fuel flow while minimizing power consumption. Its precision-engineered components contribute to smooth operation, reduced vibration, and long-term durability. Built with high-quality materials and factory tested for proper functionality, this fuel pump assembly guarantees a secure fit and seamless integration into the BMW F25’s fuel system.

Efficient impeller design enhances fuel flow while minimizing power consumption
Precision armature bearings reduce vibration for smooth and quiet operation
Low-resistance motor brushes ensure long-lasting durability and efficiency
High-quality housing materials provide enhanced strength and longevity
Factory tested for reliability, ensuring consistent fuel delivery and optimal performance

Upgrade or replace your BMW F25’s fuel pump assembly with this premium-quality component, designed for efficiency, durability, and seamless integration.

Show More Show Less

DeatschWerks 1500cc Injectors (Set of 6) - BMW E46 M52

T#:53820907

Part#: 16M-30-1500-6

In Stock at Vendor

$ 1,259.00 USD

Add to Wish List

Qty

$ 1,259.00 USD

Add to Wish List

If you are pushing the limits of your naturally aspirated build, the DeatschWerks fuel injector kit provides the reliability you need.

Fuel Injector Sealing Set

T#:592027

Part#: 13537573801

Ships in 1 Business Day

$ 35.50

This product was last offered at the strikethrough price on
04-09-2026

$ 34.56 USD

Add to Wish List

Qty

$ 34.56 USD

Add to Wish List

DeatschWerks Fuel Injectors - 1100cc - Set Of 8 - BMW S62 & S65 ...

T#:47953868

Part#: 17MX-00-1100-8

In Stock at Vendor

$ 989.00 USD

Add to Wish List

Qty

$ 989.00 USD

Add to Wish List

For enthusiasts looking to push their BMW to the limit, the DeatschWerks fuel injector set offers a professional-grade solution for fuel management.

MINI Fuel Pump - Supply Module

T#:54388518

Part#: 16117300477

Ships in 1 Business Day

$ 354.99

This product was last offered at the strikethrough price on
06-15-2026

$ 350.99 USD

Add to Wish List

Qty

$ 350.99 USD

Add to Wish List

On the street or at the track, volume and pressure are everything when it comes to fuel. A degrading fuel pump doesn't just rob your BMW of horsepower—it risks dangerous lean conditions when you're pushing the engine to its limits. When it’s time to replace a soft or failing pump, don't gamble on no-name budget brands. Go back to the source with this high-quality Bosch replacement fuel pump.

Show More Show Less

Electric Fuel Pump

2X Entries Into Our F80 M3 Sweepstakes

T#:37892143

Part#: NI0517606

Ships in 1 Business Day

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Located in the Gas tank under the rear seats

Fuel-It! Flex Fuel Kit - F-Chassis S55 - BMS/FI PI

T#:21275563

Part#: FFK-S55-FIP

Ships on Oct 15, 2026

$ 589.99 USD

Add to Wish List

Qty

$ 589.99 USD

Add to Wish List

If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your S55 BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

A90 MKV B58 Supra Fuel-It! Flex Fuel Kit

T#:21275577

Part#: FFK-B58S-FK

Ships on Oct 15, 2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

A90 MKV B58 Supra Fuel-It! Flex Fuel Kit is the ultimate upgrade for monitoring and managing your Toyota Supra’s ethanol content in real-time. This complete kit, offered by Turner Motorsport, allows you to know your exact ethanol content through the Fuel-It! or JB4 mobile app on your smartphone or tablet. It’s perfect for those looking to maximize performance by running ethanol blends, providing you with precise data to make informed decisions.

This kit includes everything you need for installation, featuring a genuine Continental® ethanol sensor, stainless steel braided fuel lines with black nylon sheathing, a Fuel-It! Bluetooth analyzer, and a plug-and-play harness. It also supports both Bluetooth App and 5v analog output for JB4 or flash tuning.

Real-Time Monitoring: Instantly view ethanol content on your smartphone or tablet via the Fuel-It! or JB4 app.
Comprehensive Kit: Includes a genuine Continental® ethanol sensor, Fuel-It! Bluetooth analyzer, and more.
Durable Construction: Stainless steel braided fuel lines with black nylon sheathing protect engine bay components.
Plug-and-Play Installation: Simplified installation with a plug-and-play harness.
Bluetooth and Analog Output: Supports both Bluetooth connectivity and 5v analog output for JB4 or flash tuning.
Optimized Performance: Perfect for those looking to maximize power by running ethanol blends.

Show More Show Less

E89 Silent Fan EKP PNP Cooler Kit - 40mm Noctua Fan

A Must For Cars With Upgraded LPFPs

T#:26471534

Part#: SILENT-E89-EKP

Ships in 1 Business Day

Starting at $ 59.99 USD

Add to Wish List

Starting at $ 59.99 USD

Add to Wish List

The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E82 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8, which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket in order to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable ASA, ABS or PETG, depending on the color choice. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With a Genuine 60mm or 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a silent Noctua fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

Pierburg Fuel Pump With Filter R60, R61

T#:54388500

Part#: 16119810567

Ships in 1 Business Day

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

OE replacement fuel pump

Genuine BMW Injector - 13647629174 - F30

T#:595038

Part#: 13647629174

Ships in 1 Business Day

$ 118.99

This product was last offered at the strikethrough price on
05-07-2026

$ 114.99 USD

Add to Wish List

Qty

$ 114.99 USD

Add to Wish List

Bosch BMW Injector -
This item fits the following BMW Chassis:
F30

Fits BMW Engines including:
N26

Deatschwerks 1200cc Fuel Injector Set - BMW E46 M3

T#:35391022

Part#: 16MX-30-1200-6

In Stock at Vendor

$ 819.00 USD

Add to Wish List

Qty

$ 819.00 USD

Add to Wish List

Maximize your engine's potential with the DW 1200cc Injector Set, a solution that bridges the gap between raw power and streetable drivability.

ProFlex Commander Adaptive E85 Flex Fuel System

T#:589749

Part#: PCF-E39M5-K

Ships in 2 Business Days

Starting at $ 899.00 USD

Add to Wish List

Starting at $ 899.00 USD

Add to Wish List

This full bolt on kit is a complete solution allowing you to alternate between standard and flex fuels without any tuning or mode switching.

URO Breather Hose - E36, Z3

2X Entries Into Our F80 M3 Sweepstakes

T#:592992

Part#: 13411247782

Back Ordered

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Used in the air intake system

DeatschWerks Performance Fuel Injector Set - 600cc

For Custom Applications - Will require additional tuning or modifications.

T#:6151337

Part#: 17MX-00-0600-8

In Stock at Vendor

$ 829.00 USD

Add to Wish List

Qty

$ 829.00 USD

Add to Wish List

If you are pushing the limits of your naturally aspirated build or stepping into a moderate forced induction setup, the DeatschWerks 17MX-00-0600-8 fuel injector kit provides the reliability you need.

Bosch Fuel Injector Kit - BMW N57

T#:33512942

Part#: 13538571795KT

In Stock at Vendor

$ 5,259.99

This product was last offered at the strikethrough price on
05-07-2026

$ 3,841.99 USD

Add to Wish List

Qty

$ 3,841.99 USD

Add to Wish List

The factory fuel injectors in the N57 diesel engines are generally reliable, but they can still encounter the typical issues faced by direct injection systems. A common problem is carbon buildup on the injector tip, which can lead to poor spray patterns, resulting in inadequate fuel atomization. This causes reduced engine power or rough idling due to improper fuel ignition. Similar issues can arise from clogged injectors caused by contaminated fuel or internal injector failure. If your diesel engine is experiencing rough idling, reduced power, or poor fuel efficiency, this replacement injector set featuring Bosch injectors is an ideal solution to resolve these issues and restore proper engine performance. Each Bosch injector comes with preinstalled sealing washers and o-rings, making them ready for immediate installation.

Show More Show Less

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Dorch Engineering B58 Gen2 DS25 HPFP Upgrade - G30, G32, G11, G15, G1...

T#:55533486

Part#: DE-582-25B

Ships in 4 Business Days

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The Dorch Engineering DS25 B58 Gen2 HPFP Upgrade provides the necessary high volume fueling required for high-horsepower builds and heavy ethanol scaling. This next-generation pump operates at a massive 350 bar, bringing unprecedented volumetric efficiency

Show More Show Less

OEM Bosch Fuel Pump With Filter - BMW F39 F48 B46/48

T#:33713117

Part#: 16117300463

Ships in 1 Business Day

$ 315.99

This product was last offered at the strikethrough price on
04-10-2026

$ 291.99 USD

Add to Wish List

Qty

$ 291.99 USD

Add to Wish List

Replacing a faulty fuel pump with an OEM Bosch Fuel Pump ensures reliable fuel delivery and smoother engine performance. This high-quality part is built to OEM standards and designed for a perfect fit, making it an excellent choice for restoring your vehicle’s functionality. This replacement fuel pump includes a strainer filter and fuel level sensor.

Show More Show Less

Hitachi Fuel Supply Module - BMW N20 N55 N26

T#:48850079

Part#: 16117243975

Ships in 6 Business Days

$ 344.99 USD

Add to Wish List

Qty

$ 344.99 USD

Add to Wish List

Delivers fuel from the tank to the engine.

In-Tank Fuel Pump

We Price Match - Give Us A Call or Chat!

T#:3886573

Part#: 16147194207

Ships in 3 Business Days

$ 189.95 USD

Add to Wish List

Qty

$ 189.95 USD

Add to Wish List

Fuel-It! B58 BMW High Pressure Fuel Pump (HPFP) Upgrade - Stage 2 ...

T#:13003684

Part#: BMWB58HPFPSTG2

Ships on Oct 15, 2026

$ 1,499.00 USD

Add to Wish List

Qty

$ 1,499.00 USD

Add to Wish List

Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware

Show More Show Less

DeatschWerks Performance Fuel Injector Set - 600cc

For Custom Applications - Will require additional tuning or modifications.

T#:6151332

Part#: 17MX-00-0600-10

In Stock at Vendor

$ 1,029.00 USD

Add to Wish List

Qty

$ 1,029.00 USD

Add to Wish List

DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 10 600cc injectors. All relevant tuning data available on DeatschWerks website.

Show More Show Less

Gates Locking Fuel Tank Cap - R55, R56, R57, R58, R59, R60, R61 ...

T#:54388416

Part#: 31778

Ships in 1 Business Day

$ 25.68 USD

Add to Wish List

Qty

$ 25.68 USD

Add to Wish List

The Gates Locking Fuel Cap is a straightforward, heavy-duty upgrade designed to seal your fuel system tight and keep unwanted hands out of your tank.

Nostrum - 3.0L BMW S55 Stage 2 Bundle

T#:42604941

Part#: H186-1281

Ships in 1 Business Day

$ 5,519.00 USD

Add to Wish List

Qty

$ 5,519.00 USD

Add to Wish List

Flowing 36% more fuel than the stock pump, the twin Nostrum HPFP’s will provide you with more fuel throughout the rev range. This allows you to dial in more boost down low, allowing for more low end torque, reach your peak power sooner, and hold that peak power for longer.

Show More Show Less

Fuel Rail Pressure Sensor - Sold Individually

T#:24377970

Part#: 0281006447

Ships in 1 Business Day

$ 81.99

This product was last offered at the strikethrough price on
05-07-2026

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

This sensor is a vital part of the high pressure fuel system, it relays fuel pressure readings to the computer. Replaces OE BMW part numbers: 13537800602 13537809130 Bosch Part Number: 0281002948 (superseded), 0281006447 (new)

Show More Show Less

High Pressure Fuel Pump (HPFP)

T#:23748108

Part#: 13517824477

Ships in 1 Business Day

$ 1,607.99

This product was last offered at the strikethrough price on
05-07-2026

$ 1,501.99 USD

Add to Wish List

Qty

$ 1,501.99 USD

Add to Wish List

Fuel Pressure Regulator

T#:54388499

Part#: 13531743378

Ships in 1 Business Day

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

Engineered to strict tolerances, this replacement regulator ensures consistent, factory-calibrated fuel pressure to optimize injector duty cycles and restore lost performance.

Fuel Tanking Mounting Kit

T#:55245836

Part#: 161X67KT

Ships in 1-2 days

$ 14.07 USD

Add to Wish List

Qty

$ 14.07 USD

Add to Wish List

This kit bundles the exact factory lock ring and fuel tank adapter, giving you the factory pieces to secure your fuel pump or filter assembly in place.

Fuel Tank Base

T#:43975

Part#: 16111181918

Ships in 1-2 days

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Genuine BMW Base - L=100Mm
This item fits the following BMW Chassis:
E36 M3,E39 M5,E46 M3,E36,E38,E39,E46,E93,F30,F31,F32,F33,F34,F36

Genuine BMW Fuel Hose "T" - E28 E30 E31 E32 E34

T#:44664

Part#: 16121182197

Ships in 1-2 days

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Genuine BMW Distribution Piece -

This item fits the following BMW Chassis:
E30,E34

Fits BMW Engines including:
M10,M20,M60,M62,S62

Fuel Pipe Bracket - E24, E28, E30, E31, E32, E36, E38, Z3

T#:615498

Part#: 16126756924

Ships in 6 Business Days

Sale - Save 9% $ 11.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.90 USD

Add to Wish List

Qty

Sale - Save 9%

$ 11.99

This product was last offered at the strikethrough price on
05-14-2026

$ 10.90 USD

Add to Wish List

Genuine BMW Fuel Injector Replacement Kit - BMW B46/B48 2.0L (Gen1 B4...

T#:50031890

Part#: B48AFIRKT

Ships in 1 day

$ 1,530.99

This product was last offered at the strikethrough price on
08-07-2026

$ 1,524.99 USD

Add to Wish List

Qty

$ 1,524.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

Genuine BMW Closure Ring - Multiple BMWs

T#:44344

Part#: 16117188565

Ships in 1-2 days

6% off MSRP $ 24.88

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.41 USD

Add to Wish List

Qty

6% off MSRP

$ 24.88

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.41 USD

Add to Wish List

Fuel tank closure ring.

Fuel Injector - Priced Each

T#:17538687

Part#: 13538656548

Ships in 1-2 days

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

Fuel injectors do exactly what their name suggests, they deliver fuel into an engine's combustion chambers to be burned. Fuel injectors can cause a whole host of problems that can lead to major engine damage, if not diagnosed and replaced or repaired as soon as possible. A dirty or faulty fuel injector can cause engine problems such as misfiring, hard starting, stalling and hesitation. If you are hearing other noises, such as clanging or high idling, you might want to check other areas of your fuel system.

Show More Show Less

Fuel Tank Strap Spacer And Bolt Kit - Each

T#:55245796

Part#: 1611118XKT

Ships in 1-2 days

$ 13.29 USD

Add to Wish List

Qty

$ 13.29 USD

Add to Wish List

This kit brings together the authentic BMW fuel tank spacer sleeve and the exact-spec M6 hex bolt with a captured washer.

Genuine BMW Base - 07147273549

T#:29859

Part#: 07147273549

Ships in 1-2 days

7% off MSRP $ 14.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.99 USD

Add to Wish List

Qty

7% off MSRP

$ 14.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.99 USD

Add to Wish List

Genuine BMW Base -
This item fits the following BMW Chassis:
F01,F02,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fuel Injector Service Kit

T#:26205119

Part#: 136417300601KTKT

Ships in 1-2 days

$ 1,494.99 USD

Add to Wish List

Qty

$ 1,494.99 USD

Add to Wish List

The fuel injector plays a crucial role in delivering the correct fuel amount to each cylinder during engine operation. If you're encountering issues like engine stumbling, hesitating, misfiring, or an illuminated check engine light, it could be due to a malfunctioning injector.

Show More Show Less

Genuine BMW O-ring - 13517528408

T#:41853

Part#: 13517528408

Ships in 1 day

6% off MSRP $ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Qty

6% off MSRP

$ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Fuel Pump Assembly

T#:594678

Part#: 16117341303

Ships in 1 day

$ 473.33 USD

Add to Wish List

Qty

$ 473.33 USD

Add to Wish List

Replacement Fuel Pump from Pierburg

Fuel Line - E36, Z3

T#:45169

Part#: 16131184268

Ships in 6 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Genuine BMW Outlet Pipe F Activated Carbon Container
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M42,M44,M50,S50

Show More Show Less

Genuine BMW Fuel Injector Replacement Kit - BMW B48E 2.0L

T#:51426470

Part#: B48EFIRKT

Ships in 1 day

$ 1,605.99

This product was last offered at the strikethrough price on
08-07-2026

$ 1,599.00 USD

Add to Wish List

Qty

$ 1,599.00 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

Kayser Fuel Filter - E34, E36, E46, Z3

T#:385292

Part#: 13321740985

Ships in 1 day

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Recommended to replace every 60k miles

Genuine BMW Fuel Injector O-Ring - S54 3.2L S62 5.0L

T#:42786

Part#: 13647830611

Ships in 1 day

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Genuine BMW O-Ring - 9,3X2,62
This item fits the following BMW Chassis:
E39 M5,E46 M3,E85 Z4M,E39,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54,S62

Show More Show Less

Genuine BMW Fuel Injector Replacement Kit - BMW B58 3.0L (Gen2 B58C B...

T#:51356037

Part#: B58G2FIRKT

Ships in 1-2 days

$ 2,218.99

This product was last offered at the strikethrough price on
08-07-2026

$ 2,209.99 USD

Add to Wish List

Qty

$ 2,209.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results